Syndicate content 0  
 

While working with GET request I encountered this situation where FHIR Server return a responseStatusHTTP "HTTP/1.1 200 200" instead of "HTTP/1.1 200 OK" (as highlighted in the attached screenshot).

Although the response code seems valid, these bundles have a total value of 0.

Could anyone clarify what "200 200" signifies in this context? Is there an issue with my setup, or does this indicate a specific condition related to the empty bundle search?

0 0
0 62

how to convert from json into sda container and then to fhir bundle resource. What are the out of the box DTL transformation class for this. Source would be my json that includes a few resources and targer should be a SDA container than will again be source to another transformation for which the target will be FHIR bundle. What I want to know is the target HS. 1for both SDA container and FHIR bundle. Thanks!

0 0
0 58

Hello,

I was just trying to get to the bottom of a TLS config - we have an interface with a TLS config that has had 'Server certificate verification' set to 'On', however the cert file specified either did not exist or contained a cert that was expired.

Does anyone know what the behavior is for this typically? I would expect this to not allow traffic on the interface, however this has been working fine for a few years now with an invalid cert specified for 'Server certificate verification' and set to 'On'.

0 0
0 90

Has anyone tried the Ansible module for qlist in the article "Ansible modules and IRIS demo"?

There appears to be a bug in the qlist code as it assumes that the qlist output has an undocumented field.

I do not have the undocumented field in the output.when I run qlist so I keep getting the error "Unexpected IRIS qlist output format".

I assume that in most cases there is no undocumented field in the output.

0 0
0 58

Very similar question posed here: https://community.intersystems.com/node/467496, but I am missing a piece of this:

How do I correctly call a EnsLib.HL7.MsgRouter.RoutingEngine class from the BPL?I can successfully call the BPL from the EnsLib.HL7.Service.TCPService, and I have the BPL created to delay then call the rule. And I set the context and the result location.

0 0
0 84

Hi,

In a customer project we started enforcing the "Inactivity Limit" as defined in System-Wide Security Parameters. The customer would expect accounts to become Disabled after they have been inactive for the specified amount of days. However, that doesn't happen; it seems the Inactivity Limit is only established after logging in.

Furthermore, the account inactivity only starts being applied after the first login. Can you confirm that?

Lastly, for accounts that have been manually Disabled, and have an expired password, we see the following weird behavior:

0 0
0 90

Hi everybody,

A customer would like to connect an IRIS database to Metabase BI. But Metabase does not have a connector that supports the IRIS database.

Metabase only supports these databases:

- Amazon Athena
- BigQuery (Google Cloud Platform)
- Druid
- MongoDB (recommend version 4.2 or higher)
- MySQL (recommend version 8.0.33 or higher, as well as MariaDB version 10.4 or higher)
- Oracle
- PostgreSQL
- Presto
- Redshift (Amazon Web Services)
- Snowflake
- SparkSQL
- SQL Server
- SQLite
- Vertica

0 0
0 96
Question
· Dec 9, 2024
API Manager Port Error

When making calls through the Dev Portal, we have observed that port 8003 is being used in the construction of URLs, as demonstrated in the attached image. However, requests should be directed to port 8000. This behavior consistently results in the error shown in the image.

Is it possible to change the port generated in the URL?


About Kong Version 3.2.1.0

0 0
0 46

Hi everyone

I hope this message finds you well. I am currently working with a database system that allows the configuration of certain options using the SET OPTION statement.

SET OPTION SUPPORT_DELIMITED_IDENTIFIERS = TRUE;

I understand that this setting takes effect at the system level, impacting all sessions and processes. However, I am looking for a way to enable support for delimited identifiers that only affects the current session, without altering the global configuration.

My question is:

0 0
0 52
Question
· Dec 4, 2024
Error importing XSD

I'm attempting to import all the FHIR XSD files provided by http://hl7.org/fhir but get the immediate and unhelpful error message:

I've tried different versions of EOLs to no avail. Any idea what this error could mean?

Here's the XSD I'm trying to import:

<?xml version="1.0" encoding="UTF-8"?>
<!--
Copyright (c) 2011+, HL7, Inc
All rights reserved.

0 0
0 58

Hello My Friends,

I have a question how to use order by %DLIST, this is my code:

SELECT

$ListToString(%DLIST(DISTINCT MRDIA_ICDCode_DR->MRCID_Code),', ' ) ICDX,

$ListToString(%DLIST(DISTINCT (MRDIA_ICDCode_DR->MRCID_Desc || ' (' || MRDIA_DiagnosisType_DR->DTYP_Code || ')')),', ' ) Diagnose

FROM SQLUser.PA_Adm

LEFT JOIN SQLUser.PA_AdmInsurance ON (PAADM_RowID = INS_ParRef AND INS_Rank = 1)

LEFT JOIN SQLUser.PA_AdmPackage ON (PAADM_RowID = PACK_ParRef)

LEFT JOIN SQLUser.MR_Adm on MRADM_ADM_DR = PAADM_RowID

0 0
0 82

Good morning dear community,

This is like my first post in this community. Let's see how this turns out.
I have a question about the Intersystems Kubernetes Operator and the deployment of the webgateways.

I am responsible for the hosting and deployment of the apps. For the future we are planning to host our application in a kubernetes cluster. I am using the IKO for this.
I am using webgateways, for external access as separate pods. And sidecar containers for internal access, like the management portal.

0 0
0 67
Question
· Nov 20, 2024
Error Compiling class

Hi,

When I try to compile a specific class it fails and gives the below error message.

ERROR #5002: Cache error: <FUNCTION>zLockUse+5^%ExtentMgr.GlobalRegistry.1
> ERROR #5030: An error occurred while compiling class 'ClassNameHere'

Is there anything I can do to fix this issue?

Thank you in advance for your response.

0 0
0 70
Question
· Nov 15, 2024
DICOM Extended Negotiation

Is there a way to create and establish DICOM Association with Extended Negotiation?

I have implemented DICOM Query/Retrieve C-FIND, using EnsLib.DICOM.Operation.TCP and EnsLib.DICOM.Process base classes. My application, acting as an SCU, needs to query by Study Date-Time (combined date-time matching) range with timezone query adjustment. For this, I need to use Extended Negotiation.

0 0
0 74

I'm trying to get the python external language server started up in a container I am starting. The container is up and running but I cannot get the python language server to start.

This is the error that is coming back when trying to start the language server. I have tried creating a custom image with that package installed but it still does not work. Is there something specific that needs to be done to to get this working? (FYI, I have the dotnet version working but creating a custom image and installing the dotnet runtimes via a docker file)

0 0
0 50

We've got some web services that utilise EnsLib.SOAP.Service/EnsLib.REST.Service. These do some further requests to a few operations to call some other services and return the combined results.

An issue that we are noticing is that some of the usage involves users hitting the refresh button a few too many times and generating a lot of requests. This is mostly an issue when the service that the operations are calling are down or slow to respond. IRIS starts using a lot of RAM when this occurs and has caused outages by getting through an extra 50-60GB of RAM.

0 0
0 89

Hello,

I'm trying to carry a custom error from one business process to another.

BPL:LookupClass fails it's lookup and a custom error of "Lookup XYZ" is generated.

The class quits with that error, but upon quitting, the custom error gets wrapped in an Ensemble System error:

ERROR <Ens>ErrBPTerminated: Terminating BP LookupClass # due to error: Lookup XYZ

0 0
0 90