Hi Everyone,

In the previous article, we combine ZPM with Config-API to load a configuration on module loading\install.
It could be useful for small applications, but for a large application, it's not convenient.

You can need to create multiple namespaces and install many zpm modules on different namespaces.
Using the configuration document on zpm load\install is a problem for this special case.
Moreover, even if you need only one module and one namespace, ZPM client is designed to install on the current namespace and it's not possible to switch to another namespace during the install.
So, If

Following instructions on this page https://docs.intersystems.com/latest/csp/docbook/Doc.View.cls?KEY=D2IMP… I am trying to create a Data Connector to be used as a base class for a cube with update support.
That page suggests that putting an SQL query inside XData block is not suitable for a Data Connector that supports updates.
Later it also suggests that to enable updates your SQL query must include 

WHERE $$$RESTRICT

Providing an example of it in XData block example like this

<sql>SELECT A,B,C FROM MyApp.MyTable WHERE $$$RESTRICT</sql>

Which I already have

Hi Developers!

We had a set of technology bonuses for the InterSystems IRIS Developer Tools contest.

And here is how projects collected it:

Announcing gj :: locate.  A simple extension for VS Code that will help you get to the source of your errors.

In VS Code, using either the Serenji extension or the basic InterSystems objectscript extension, this small add-on will open the appropriate class or routine and position you at the exact line where an error occurred.

No more tedious counting of lines to find <UNDEFINED>zCredit+206^Ledger.Invoice.1.  Instead, with gj :: locate you can get there with just a couple of clicks.

This 20 second video tells it all:

Download now and enjoy getting to the source of your errors.

Hello Everyone,

We are currently in process of implementing REST APIs using IRIS and we are also looking at using Intersystems API Manager. 

Our aim is to implement a Microservices Architechture where Services are small in size,  bounded by contexts, autonomously developed, and independently deployable. 

We are following a spec first approach where we are first defining the API specs into Swagger Hub and using IRIS API Management Service to build the REST classes i.e. the Specification class, Dispatch class and Implementation Class.

Methods in Implementation class invoke a Business service in

Hello developers! I present to you the project of editors in terminal mode. The full-screen editor of routines, arrays and text files in terminal mode can be useful to you when debugging your project in docker or when your web interface is unavailable or limited for some reason. Although this project is self-sufficient, I decided to make it as an addition to the ‘zapm’ module for the convenience of calling editor commands.

If your instance does not have a ZPM, then you can install the zapm-editor module in one line:

set $namespace="%SYS", name="DefaultSSL"

I can run Google Maps within a Zen app via the <ds:mapView> with no issue.

Is there a way to embed google maps in a ZEN PDF report?

An example of code would be most useful.

Thank you

IRIS 里有sha256withrsa加密算法的实现吗？

We are migrating from 2017.1 to Nice New Iris. Data conversion is fine. However, we would like to do a "global" Enable="false" on all the production's services and operations. Is this possible? Working through the operations and services will be tedious! Any code that can do this would be a great help.

Thanks

Please how can I schedule a call with InterSystems admin? We have a need  to back up our cache DB  server in azure using recovery services vault/snapshot. We Have come up with several designs but we need expert advice from InterSystems’ s team or anybody here in the community. I have been asked to contact  an InterSystems admin for support but I don't know how to schedule a meetings since they don't have teams presence with our company.

I want to convert the image to base64.

I have only a remote image URL.

please suggest the solution with allow cors origin.

There will be serious errors and garbled code when I use the Data Migration to connect to MySQL through JAVA gateway. In fact , there are always many problems when I import data to the Caché database.

Hello,

I'm using $ZF(-1) in a class method which will be invoked from a csp page.

What determines the environment of the spawned process?  If I use $ZF(-1,"echo hello world > output.txt"), the resulting file is owned by cacheusr:cacheusr.  However, when I use $ZF(-1,"printenv > output.txt"), the environment is from my personal unix account, no matter which Cache username I'm logged in under when running the web application.  

Thanks

How to I use ..CurrentDateTime() so it returns in format YYYY-MM-DDTHH:MM:SS+ and in eastern time?  Need code to be in DTL, not in ObjectScript.

Hi Community,

I am trying to access another process's content of objects like %request and %session. I am using the class/method "%SYS.ProcessQuery:VariableByPid". Does anyone knows how to get the value of the properties like %request.Data("ID",1)  from one process that is running on the DB server?

Example of what I am trying to do:

        set rs=##class(%ResultSet).%New("%SYS.ProcessQuery:VariableByPid")
        set tsc=rs.Execute(ProcessID,"%request")
        while rs.%Next() { 
            w "Name:"_$g(rs.Data("Name")),!
             w "Value:"_$g(rs.Data("Value")),!
        }
        do rs.Close()

Today we have only 'Snippets' to classes:

how i can custom this Snippets to show my labels or variables of atual routine?

gj :: connect is a demonstration extension that shows how to extend the Intersystems Server Manager to perform custom actions.

It makes use of the context menu contribution points to add both in-line and right click menu options.

It also demonstrates how to create a new top level folder in your workspace corresponding to the server and namespace selected in Server Manager.

Features

• Add in-line command to each namespace folder
• Add right-click context menu to each namespace folder
• Demonstrates use of getServerSpec api to read and use connection properties
• Demonstrates how to launch a url in an

You may think it isn’t too difficult to get from label+offset^routine to the actual source line responsible for the error.  For an expert it isn't that hard... most of the time.  But there are enough oddities and special rules that even an expert can get it wrong, whilst spending a lot of time trying to get there.

gj :: locate is the latest tool from George James Software – it debugs any error, class or routine by converting the location of an error in compiled .int code to the corresponding location in your source, and then taking you right there.

Image this scenario…

Hello,

First of all thanks for your time reading this question,

We would need some help,

The challenge is that our Ensemble does not start.

If we Launch Ensebmle we see:

When we open: C:\InterSystems\HealthShare_2\mgr\cconsole.log

We read:

04/13/21-13:00:29:878 (8084) 3 Error: ERROR #5001: Could not start SuperServer on port 56773, may be in use by another instance - Shutting down the system

When we use: netstat -oan

We observe:

TCP    [::]:56773             [::]:0                 LISTENING       2396

Then we write: tasklist /svc /FI "PID eq 2396"

And we have:

Nombre de imagen               PID

I checked out a Git-Branch and want to Import all Objectscript-Objects to my localhost.

While using Import without Compilation I receive a lot of errors.

request to http://127.0.0.1:57772/api/atelier/v3/TSTCBW/doc/MusLT01LCOD.int?ignore… failed, reason: connect ECONNREFUSED 127.0.0.1:57772

While using Import and Compile I receive much more of this errors.

Is there a setting, that I have to key in?

Or how can I synchronize my namespace to test my changes?

hi,

I have redhat 8.3, after installation Cache and everything looks good , when i stop the DB by  /usr/cachesys/cstop i get :  

Apr 18 16:10:22 opticanan Cache(CACHE)[115418]: Cannot remove database lock /cav/mln/cache.lck: Delete failed
Apr 18 16:10:22 opticanan Cache(CACHE)[115418]: Cannot remove database lock /cav/w/mlnw/cache.lck: Delete failed
Apr 18 16:10:22 opticanan Cache(CACHE)[115418]: Cannot remove database lock /cav/w/mgrw/cache.lck: Delete failed
Apr 18 16:10:27 opticanan Cache(CACHE)[115418]: Unable to open database lock /usr/cachesys/mgr/fdbms/cache.lck to delete it
Apr 18 16:10:27

Hi all,

I need some help in studio.

Is there a way to create a variable to determine if it is in the test or live environment?

Thanks

Adrian

We are seeing more and more customers being lured with latest infrastructure technologies, particularly Composable Infrastructure. Coming with all sorts of data center consolidations and costs savings.

Question is: are there any concerns for HealthShare/TrakCare being run on these platforms or things to look out for? Anyone out there, already on these platforms?

To be more specific this is HPe Synergy with 480 Compute blades booting as bare metal.

Regards;

Anzelem.

If you work with Portal on multiple instances of Caché, Ensemble or HealthShare you might find it useful to set the System Mode of the various instances, so as to give yourself a visual reminder of the role of the one you're currently working on.

For instance:

Hey Developers,

You asked - we did it! We're glad to announce the next competition for InterSystems Developers! Please welcome: 

🏆 InterSystems Programming Contest: Developer Tools 🏆

Submit an application that helps to develop faster, contribute more qualitative code, helps in testing, deployment, support, or monitoring of your solution with InterSystems IRIS.

Duration: March 29 - April 25, 2021

Total prize: $8,500 

I am attempting to POST a Bundle containing a resource to an ISC-based Resource Repository. Documentation says "batch" interaction is fully supported - so I assume this is possible.

I post to the FHIR base URL, but I get the following back: " The requested URL /customfhir/r4 was not found on this server."

The bundle I use to post to create a patient resource is very simple (see below). I am using a request.method of POST because I want the Resource Repo to create a new fhir resource id.

I'm using Postman to generate the request.

Greetings all,

Need to connect your VSCode to an InterSystems Server?

Heard of this option?

Hi Developers,

In the previous article, we describe how to use config-api to configure IRIS.

Now, let's try to combine the library with the ZPM client.
The goal is to load a configuration document during zpm install at the configure phase.

For this exercise, a template repository is available here (this is based on objectscript-docker-template ).

We attempt to :

• Create a database MYAPPDATA.
• Set Globals mapping for dc.PackageSample.*.
• Add a user named SQLUserRO with read-only SQL role access.
• Add an SSL Configuration named SSLAppDefault.
• Create a REST application /rest/myapp.

The configuration

When creating pivots in DeepSee, there is the ability to group date dimensions by Day, Week, Month, Quarter, Year.  For some of our reporting the Week option is desired.  However the display looks like the image shown below.  Notice the "YYYYW##" formatting.

Is there any ability within DeepSee to modify the display of grouped week dates?  E.g. instead of 2020W14 it could be 03/30/2020-04/05-2020, or even just the start or end date, etc.

Hello,

We would need some help, please

First of all thanks for your time used reading this question

Also, thanks for your patience

We need to generate an ACK in a Process and return it to the Service to reply

We have currently written a code block with:

  //Devolvemos ACK AA a DragoAP para indicar que no procesamos las prepeticiones
 
  set pOutput = ##class(%GlobalCharacterStream).%New()
 
  //set ACKer7 = ..GetAck(mensajeHL7, "AA")
 
  set ACKer7 = ##class(ITB.HL7.BS.XMLService).GetAck(context.mensajeHL7, "AA")
  set ACKxml = ##class(ITB.HL7.Util.Convert).ER7ToXML(ACKer7,.tSC)