I am trying to get the value of a Submit button on a CSP object page.

<input type="Submit" value="Assign" name="action" id="action">

I tried getting it thru $GET(%Request.Data("action")), but it throws an Undefined error. Isnt $GET supposed to handle it if its undefined anyway?

How do I get the "value" of the button pushed when the form is set to POST?

0 4
1 25

Hi everyone,

I’ve set up a scheduled task in InterSystems IRIS to run every night at 2:00 AM, but it doesn’t seem to trigger consistently. Some nights it works as expected, but other times it just skips without any error in the logs.

The task is marked as enabled, and there are no conflicts in the Task Manager. I’ve double-checked the system time and time zone settings all looks fine.

0 1
0 15

I am receiving a FHIR response bundle back with a resource of patient. Using fromDao, I attempted to take the stream and put it into FHIRModel.R4.Patient but it is not mapping correctly. When I attempt to take FHIRModel.R4.Patient and write it out using toString(), all I am seeing is the resource

{"resourceType":"Patient"}

so the response is not mapping correctly to FHIRModel.R4.Patient. How have others handled this? Do I need to translate it to an SDA since it does fit the model format?

0 4
0 22

Hi Community

I'm working on a complex piece of rules that needs to check each OBX and evaluate if 3 of the fields match certain criteria. I've tried to achieve this using a Foreach loop, which does work, however it is not as clean as I wanted it. I was hoping I could assign temp variables inside the foreach loop to make the rules more easier to read, for example @testCode @resultText. This is not support as you can only assign inside a when condition. Before I raise this as an idea, i wondered if there was an alternative way to achieve the same thing?

1 1
0 14

Hello everybody,

I would like to export project contents using Visual Studio Code, as well as I do with InterSystems Studio.

However, while attempting the export through the InterSystems extension I get the following error:

- There are no folders in the current workspace that code can be exported to.

These are the step to reproduce my error:

1 7
2 66

I am making a FHIR request against Epic, in when I get the Response back using "fromDao" I am extracting the stream into HS.FHIRModel.R4.Patient. However, the patient's name comes back as name within a list that references HS.FHIRModel.R4.SeqOfHumanName.

  • How do I extract the name from HS.FHIRModel.R4.SeqOfHumanName?
  • Do I have to then do another "fromDao" to pull the list into string format?
  • How do I navigate around the lists that are in a FHIRModel response, to extract the string values?
0 5
0 36

The below code is not working. its unable retrieve Record count and merge files

Class Util

{

ClassMethod zPyRecordCount(inputfile) As %Integer [ Language = python ]

{

import pandas as pd

import iris

import io

try:

df = pd.read_csv(inputfile, sep='|')

recordcount=len(df.index)

sys.stdout.write(len(df.index))

return recordcount

except Exception as e:

return 0

}

0 2
0 27

Hi everyone,

I'm working with JavaScript in InterSystems IRIS, specifically in CSP pages. One issue I'm running into during development is that the browser keeps loading the cached version of my JavaScript files, even after I’ve made changes or recompiled the code.

I would have to clear my cache files or browser history for it to reload and work.

0 3
1 49

I'm running the image "containers.intersystems.com/intersystems/irishealth-community:2025.1" as a container on my local Docker desktop.

Now I want to set up an ODBC SQL connection, but I don't know how to do it.

I have tried various ways without success. Like building my own image (see "Dockerfile" description below).

I have also added ODBCINI variable in my docker-compse (see "Docker-compose.yml" description below).

Anyone done this before?

I'd really appreciate some help.

Thanks.

0 1
1 24

Hi noble devs!

Just building a simple frontend->JSON->IRIS backend story, and figured that IRIS while importing via %JSON.Adaptor wants JSON fields to match property names, meaning even should match the case. Like:

{ name: "John", 

surname: "Doe"}

will have issues while saving the dynamic object to a class Sample.Person with:

0 15
0 101

I am looking to create a Python virtual environment (venv) so that my imported/installed python packages can be separate on different namespaces in IRIS. I am able to go and create an environment, activate it, and install packages, but I am not sure how to ensure that Embedded Python methods actually point to this virtual environment.

Is the best solution to just load the virtual environment at runtime, in each method? That seems like a bad solution. Has anyone run into this and found a good solution?

0 2
1 61

I am attempting to follow the tutorial at Publishing Web Services Using Caché | Caché Web Services QuickStart Tutorial | Caché & Ensemble 2018.1.4 – 2018.1.11 to build a toy SOAP web-service using Cache but am running into what I suspect are permissions issues, or perhaps setting up the "plumbing" to get an incoming request to call the web-service methods.

0 1
0 20

My HL7 message got "AR" (rejected ack code) and went to the suspended queue. I re-submitted it (without editing it) but forgot to write down the details before doing so. It got "AA" and everything works fine from there.

Now (the next day) I want to check with the downstream system why they returned "AR" initially. Is there a way to search for the original message the got an "AR", along with any returned error message please?

Thanks

W

1 3
0 35

I'm trying to open a TCP connection to a remote system. The Caché command I'm using to open the connection is OPEN "|TCP|"_PORT:(IP::"PSE"):10 where PORT is a port number in the range 40000 to 40100 and IP is a standard IPv4 addess like 10.200.100.50
the connection appears to open because $TEST becomes 1.
I'm then writing to the open port with USE "|TCP|"_PORT:(::"S") WRITE "some text",*-3
It's a windows system

1 4
0 51
Question
· Jun 24
Using %Net.WebSocket.Client

Hi Guys,

I'm trying to use %Net.WebSocket.Client to collect data from a sever,

and part of that I needed to implement Two classes (SX3.Production.HTTP.AdvCredenials & SX3.Production.HTTP.AdvListener) as below for the purpose of Credentials & EventListener properties,

0 8
0 56

Hello, good morning, thank you so much for reading this question. ☺️🙂👍

We are developing a code to get information about our Production's items: services, processes and operations.

We know we can get various configurations of a given item: Category, Port, Enabled...

But we wonder how we could get the date time of the last mesage (most recent) received in an item.

To give a code snippet a small section of the code we have developed (and tested), it looks like:

1 2
0 41

Hi,

I'm trying to install NodeJs (javascript runtime environment) in IRIS container so I can execute JS files?
It was easy to install it outside the container but I got the attached error when trying in the container:

Thanks

1 1
0 24

Hi all,

We're developing a medical appointment app that connects doctors' schedules to an appointment provider.

The provider is returning us the appointment in the following format:

Thu Jul 03 08:20:00 CEST 2025

It means, 03 july 2025 at 08:20:00 Central European Summer Time (UTC+2)

But we need the following format:

2025-07-03 08:20:00+02:00

Is there any option to convert zone time code (CEST) to a UTC+x ?

How to convert zone time code (CEST, CET, ET, EDT, etc..) in its zone time in UTC (UTC+2, UTC+1, UTC-5, etc..) ?

1 4
0 49

Good day

I am trying to connect a business service to fileZilla using FTP on my local PC Win 11.

I am trying to setup my training after attending the Building HL7 interfaces course with ISC.

The connection is failing. He is the error below

ERROR <Ens>ErrOutConnectFailed: FTP Connect failed for localhost:21//SSL=' with error ERROR <Ens>ErrFTPConnectFailed: FTP: Failed to connect to server 'localhost:21//SSL='/' (msg='Missing required argument',code=501)

0 1
0 28

Hello,

I have a problem generating QR code in Caché now.

After executing the code

set Status=##Class(%SYS.QRCode).GenerateImage(P0,,.DataURI)

(variable P0 contains data for QR code)

an error is displayed now:

0 1
0 31
Question
· Jun 19
Namespace vs database

I'm confused about the differences between a namespace and a database.

I understand that a database is a single IRIS.DATA file in a directory in the os hosting IRIS.

What is the difference between a namespace and a database?

Can I write data into a database without specifying a namespace?
If so how do I write to a particlar DB in objectscript?

Does a database have to be in a namespace?
Can a database be in more than one namespace?

Can a namespace have only one 'routine' database and only one 'data' database?

0 8
0 96