I've just stumbled across this post. I am an aspiring developer and one of my first few projects is a HL7 v2 message generator. It takes in a message template and then you can edit and create bulk messages from it. 

Simply choose which segment to edit, specify the field position and then you can add a CSV of values. test, test2 and so on. You can choose to download the messages or display them in your browser. It also provides a JSON file showing you which new values are grouped. Not sure of all the use cases but I built it for a bit of fun over a weekend! 

Hi!   

I'm trying to set up a Clinical Viewer demo env with HealthShare 2024.2. 
I've done the standard installation following the doc : 

• UCR - UCR demo with IHE
• CV - CV demo

Everything works until I get to the point where I have to enable federated SSO (UCR demo - Federated SSO). Once it is activated, I can no longer access the instance through the portal, and the browser displays the following error:

Checking the messages.log, I see that every time I try to enable federated SSO and access the portal, I encounter the following error:

Hi everyone,

I'm trying to connect my Laravel application with the InterSystems IRIS Data Platform using ODBC.I need help setting up the ODBC connection and querying the database properly. What is the proper way to configure Laravel to work with an ODBC connection to InterSystems IRIS?

Any help would be greatly appreciated!

Thanks in advance!

Hello my Friends,

I have a question, I have a data like this

And I want to create a display like this, which I can put a status column beside the Item Column

The status become new, if there's no previous item, and if there's a same item after the first one, the status become Old

Does anyone could help me ?

I need to display it without subquery if possible

Thank You

Best Regards,

Steven Henry

I have a query that returns around 6000 records that I need to go through and update another MS SQL Table. I would like to execute this once a day. How do you set MaxRowsToGet on a EnsLib.SQL.InboundAdapter service?

Thanks

Scott

Hello,

I was just trying to get to the bottom of a TLS config - we have an interface with a TLS config that has had 'Server certificate verification' set to 'On', however the cert file specified either did not exist or contained a cert that was expired.

Does anyone know what the behavior is for this typically? I would expect this to not allow traffic on the interface, however this has been working fine for a few years now with an invalid cert specified for 'Server certificate verification' and set to 'On'.

Hi Community,

We're excited to invite you to the webinar 2025 Data Management: Technology Trends & Predictions.

Join this webinar for an engaging and insightful tech talk on the latest trends in data management technology in the UK and Ireland.

⏱ Date & Time: Thursday, January 23, 10:30 AM GMT

👨‍🏫 Speakers: 

• Andy Hayler, Practice Leader, Bloor Research
• @Mike Fuller, Regional Director of Marketing, InterSystems UK&I

Hey Community,

It's time for the new batch of #KeyQuestions from the previous month.

Hi,

I am looking for TrakCare online learning material.

Thanks

Hi everyone,

I’m currently experimenting with the SQL Gateway Connection, CREATE FOREIGN SERVER, and the THROUGH command (IRIS Documentation). To speed up my tests, I’ve combined several DemoDataSets in a Docker container and would like to automate the creation of SQL Gateway Connections using code. 

(By the way, if you’re interested, the Docker container is available here: Demo DBs IRIS.)

Hello Community,

we're running an Iris installation on SLES 15.5 using the SLES Apache server and web gateway for hosting the management portal on Port 57772 (e.g. http://<host-name>:57772/csp/sys/%25CSP.Portal.Home.zen?$NAMESPACE=HL7TOFHIR) on the same machine. The Iris installation also provides a FHIR Server in a separate namespace which uses the base URL http://<host-name>:57772/fhir/r4 for connections.

Hi Guys,

This Nested query is not working for some reason, but they work fine when executing  separately ?  

select id from FDRD_Com.List where vehicle in (select Car from FDRD_Com.Prod where ProductLineName='Toyota' and Car is not null)

Thanks

Earlier this year I announced availability of a VS Code extension for coding in ObjectScript, Embedded Python or SQL using the notebook paradigm popularized by Jupyter. Today I published a maintenance release to correct a "getting started" problem.

Here's a video of the installation steps from the extension's README:

(video superseded by an update in a later comment)

Why not try it for yourself?

When developing a new Interoperability Production, it is quite natural that settings are initially added in the Production.

However, as soon as you want to move the Production from development to a test or staging environment, it becomes clear that some settings like HTTP Servers, IP addresses and/or ports need to be changed. In order to avoid these settings being overwritten during a redeployment later on, it is essential that you move these settings from the Production to the System Default settings.

Dear community, my company use intersystems iris, a old version of 2019 and centos 7.9

At the moment, we are faced with a rather strange luck of iris.

Every day during working hours, we receive a error that iris primary cannot transfer the journal to the backup node.

We have availability monitoring, these errors do not affect availability in any way, but I still wanted to analyze this error.

I understand that the severity of this error is only 1, but Can someone share a diagnostic method this error?

The best way to list, edit, save and delete globals is using an IDE. Now, it is possible if you use VSCode. It is also possible to save globals using yaml files. Perform the following steps:

1. Get an InterSystems IRIS instance and install the application iris-global-yaml: 

zpm:USER>install iris-global-yaml

2. If you just to want an InterSystems IRIS trial for tests git clone and run on docker:

git clone https://github.com/yurimarx/iris-global-yaml.git
docker-compose up -d --build

Last Chapter: Creating a REST client to get Tracks from Spotify REST API - Part4 Save the Search Result

Git link: https://github.com/ecelg/InterSystems-IRIS-as-a-Spotify-REST-client

OK.... based on what I have done.... I am able to 

1. Query Track information by making use of the Spotify API

2. Store the necessary data into my own album, artists, and track table

so.... what next?🤔 How about I set up my own REST API service on my IRIS for the other people to query my table?🤔🤨

ok... 1st... start from document Introduction to Creating REST Services

Hello and welcome to the Developer Ecosystem News, Fourth Quarter!

This last quarter of the year was full of exciting activities in the InterSystems Developer Ecosystem. In case you missed something, we've prepared for you a selection of the hottest news and topics to catch up on!

You'll find the original text and all my Advent of Code efforts in different programming languages in https://bitbucket.org/janihur/advent-of-code/src/master/

ObjectScript code discussed here is found in https://bitbucket.org/janihur/advent-of-code/src/master/objectscript

I have been using ObjectScript only on last 1,5 years maybe 30% of my working time but the code at work is very different than in these puzzles. You can find my random code snippets and learning notes from https://github.com/janihur/objectscript-ex

We have released IPM 0.9.0. I previously remarked on some of the history and reasoning here; to summarize, this is a big release for two reasons: it represents a long-overdue reunification of our internal and community-driven work around IRIS-centric ObjectScript package management, and it has some backwards incompatibilities. There are several necessary backwards incompatibilities in our roadmap, and we've lumped them together; this will not be some new norm.

Hi fellow developers in InterSystems IRIS!

I'm often being asked, especially related to technical bonuses we encourage for every Open Exchange contest why do we constantly give bonuses for Docker, IPM and ObjectScript Quality pass.

In fact, this is very easy to answer.

Last Chapter: Creating a REST client to get Tracks from Spotify REST API - Part3 Get some data (e.g. Artists)

Git link: https://github.com/ecelg/InterSystems-IRIS-as-a-Spotify-REST-client

OK we create a method to get data and lets try to get some Tracks 😁

Now open a terminal and test the code

Run the following line

w ##class(rest.utli.requestUtli).getdata("Spotify","/search","offset=5&limit=10&query=Shape%20of%20you&type=track&market=SG")

ooooo no seems there is huge among of data returns.....😥

I would like to know what information can be found in 1 track....🤔 how about only query 1 track?

Git link: https://github.com/ecelg/InterSystems-IRIS-as-a-Spotify-REST-client

Recently, I come up an idea in my mind that how can I put my playlist on IRIS.🧐

At the same time, I was told to pay for my Spotify subscription💸💸... ooo.. how about to get some data from the Spotify API... so I started to do study about it.

Like most of the development, let's start from Documentation of  the API https://developer.spotify.com/documentation/web-api

In order to get the data, i am required to request an access token from for the token endpoint URL.🧐

I recently met an ages old issue related to code maintenance:

• You have access to your IRIS server just over ODBC/JDBC
• no VSCode access, no Studio access
• no (Web-)Terminal access

But you need to take a look on Classes or Routines or Globals !!
Anyhow SQL is your friend.

• First you need a simple table as temporary text store.

CREATEGLOBALTEMPORARYTABLE  arcc.txt (line VARCHAR(32000))

Not a thrilling action.

• Next you export your code to local file and import it to your table

I have a unique index on two properties in a class, and I want to open the instance by index key with one of the two properties is set to the empty string. Is this possible to perform?

Take the example class here

Class TestIndex
{

Property Mandatory as TestClass [Required];Property Alternate as TestClass;Property AltOrEmpty As%String [ Calculated, Required, SqlComputeCode = {Set {*} = $Case({Alternate},"":$c(0),:{Alternate})}, SqlComputed ];
Index AlternateMandatory on (Mandatory, AltOrEmpty) [ Unique ];
}

And example data as

Hello everyone,

I hope you're doing well!

I wanted to share that a new JDBC driver version has been added to the iris-driver-distribution repository on GitHub. The filename is intersystems-jdbc-3.10.1.jar.

However, I noticed that the commit message doesn’t provide much information about the IRIS version this driver is associated with. Could anyone clarify if this is a final release? Is it production-ready? Additionally, are there details about the bugs it addresses or the new features it introduces?

Hi Community,

It's time to announce the winners of the "Bringing Ideas to Reality" Contest! 

Thanks to all our amazing participants who submitted 13 applications 🔥 

Now it's time to announce the winners!