#InterSystems IRIS

Hi Developers!

With InterSystems IRIS Cloud SQL recently becoming Generally Available, some of you may have had a chance to try it out. Or maybe you used it for your contest entry or during the EAP period. We're curious to learn what YOU think of it. So, have you already tried the new service InterSystems IRIS Cloud SQL? 

We have launched a new Ideas Portal category dedicated to this database-as-a-service (DBaaS) where we're looking for your ideas on how we can improve InterSystems IRIS Cloud SQL. 

Or share your experience with the service in the comments to this post. 

Hi developers!

Want to discuss with you the case of %Status.

If you familiar with ObjectScript you know what is it. I'd love to hear the history of the case why it had appeared in ObjectScript but it turned out that almost every system/library classmethods return %Status and there is a whole set of tools to deal with it.

What is does it gives you the responsibility to check the value or %Status of every system method you call.

E.g. if you save the data of the persistent class,  you should never call like this:

do obj.%Save()

you need to call:

set sc=obj.%Save()

if $$$ISERR(sc) do // something or quit.

With System Alerting and Monitoring (SAM) being deprecated in the near future..

• What is everyone's go-to for Monitoring IRIS? 
• What is readily available?
• What is the cost surrounding it?

Just trying to get ideas floating around of what we might need to start looking at to satisfy IT leadership.

Thanks

Scott

Hi,

We're working on new capabilities to help you build Agents and AI applications faster with InterSystems IRIS. In order to better understand which entry points and development methodologies would help you most, we've created this brief survey: Building AI solutions with InterSystems IRIS. 

Filling it in should not take much more than 5 minutes, and your feedback on this exciting topic will help us fine tune our designs and prioritize the right features.

Thanks in advance!
benjamin
 

I am currently adding a field to our Existing messaging from Epic, however there might be a possibility I need to back load data into the Ancillary system. While I have the previous messages that can be sent, they do not have this additional field that I am adding to the message.

I can do a lookup against Epic Clarity SQL Database; however, I don't want to throw a wrench into the workflow if the system cannot connect to the Epic Clarity SQL Database.

• What is the best solution for this?

Hello All,

I have been using IRIS / Ensemble for over a decade and appreciate lot of it's functionalities and features, however besides having a UI of 80's era (which doesn't bother me), what I believe where IRIS is lacking is lack of out of the box connectors (services/operations).
If we look at IRIS's competitors for eg Mulesoft, Talend, Boomi they all have hundreds of pre-built connectors for major applications like Salesforce, SAP etc and cloud services like Azure, AWS etc to store and retrieve information and data.

Just to give an idea here is a link of Dell Boomi connectors

https://help.

Hello everyone,

As someone who is new to the world of InterSystems technology, I have been looking for the best resources to learn more about it.

I have heard great things about InterSystems technology, particularly its speed and scalability, and I want to make sure I have a solid understanding of it before diving in further. From what I understand, the official InterSystems courses cover a wide range of topics and are taught by experts in the field.

I would appreciate any recommendations on which courses to take, particularly if there are any that provide a good foundation for beginners.

Hi guys!

Suppose you developed a tool, framework, library on InterSystems ObjectScript for InterSystems Data Platform, share it via Open Exchange and want people to install it. 

What is the best strategy if it is a library and supposed to be called from different namespaces?

Here are the following thoughts:

1. Tool's developer should be able to use globals to read/store data the tool needs.

2. Tool's consumer should be confident, that the thing he/she installs will not harm the application's data.

3. A tool should be callable from any application's namespace.

4. Tool's installation(in general) should not request manual security changes (e.g. grant the write access to IRISLIB) and %YourClass is not an option.

5. It's easy to uninstall the tool - just delete the namespace/database (maybe delete some web-apps too).

When overwriting the Read method (that has a %CacheString return type) on a new class that inherits %Stream.FileCharacter class, returns an error about incorrect return type, must be Binary, even if it matched the real signature.

Looking at the compile global information we can see:

^oddCOM("%Stream.FileBinary","m","Read",42)="%Library.Binary"

After further investigation we realise that there is a generator method looking at the OdbcType class definition.

Setting LONGVARCHAR results in:

^oddCOM("User.CStream","m","Read",42)="%Library.String"

Dear All ,  As per the title, 

I was tasked to upgrade an old legacy system to run on Windows 11. 

I am having a problem with Cache mostly.

I have the version: VERSION 5.0.14 , BUILD 5702 , OBJECTS 5.0.5702.0 I would like to know if there is a way to run it on windows 11 somehow.

I know I am asking for a LOT.  Unfortunately, the provider of the suit is long gone, and I can't keep it on windows XP.  Let me know if there is an alternative way to get it up to date even with the lowest / more recent version. 
Thank you in advance for your time.

I am sure I came across this in the past with Cache and just saw this again in IRIS.

When rebuilding or swapping a DAT file for a database it retains the Resource of the DAT file, not the Resource of the Database it is being used for.

For instance, if I have a local Database called APP with a resource %DB_APP and I want to refresh the data from another Database called TEST that has a Resource %DB_TEST I can just copy the DAT file from the TEST folder to the APP folder.

No Database settings are changed and it is all done with either IRIS down or the databases dismounted.

When I'm asked questions about SQL, I like Intersystems staff at the WRC, generally ask about the Query Plan.  My feeling is that even before you run a query you should examine the results of Show Plan to confirm that the code is going to give me the results in the manner I would expect.  If I expect it to leverage an index and I see that it is not then I go back and look at what I might have done incorrectly and try to re-write the query to get the index behavior I'm looking for.

Messages between Business Hosts in Interoperability Production often contain object properties.

Do you define and pass them as object properties or do you define and pass them as Integers with objects conversion where required?

Why?

Has anyone had any success reading barcodes from PDFs or images in a Cache/IRIS application? I've been looking at some possible solutions for this, including the open source ZXing libraries. I know we have the ability to create them in Zen and Intersystems Reports, but as far as I know, there's nothing built in to actually read data from a barcode. If anyone has suggestions on how to go about this, I'd love to hear them.

In our specific case, we print reports with a Code 128 barcode on them.

I ask ChatGPT periodically to produce ObjectScript or plain MUMPS code for string manipulation, or for implementing known algorithms etc. Occasionally, it does make mistakes or uses non-existing class members but generally not that bad. Is there any tutorial on the subject of using AI for coding, ideally specifically for ObjectScript/MUMPS? Any AI productivity advice, or tricks you are using, or another AI flavor?

Thanks in advance,
Anna

Hi Guys,

I'm new to IRIS and I'm converting from Ensemble 2018 to IRIS but not sure how to convert my cache.data file to IRIS.dat, I copied my cache.data to a new folder then went to IRIS management portal and created a new database and specified the directory to where my cache.data and saved and I thought that IRIS will automatically convert cache.dat to IRIS.dat but instead it created a new empty IRIS.dat, I guess I was wrong in my assumptions !?     

also by leaving the New Volume Threshold size as zero is that mean that I always have only one IRIS.

I am surprised with the performance (poor) of Native API for .NET

       Following code (where ^testGlobal,node1 has 50 records) takes 5 seconds to run.  Anyone else think there is room for the improvement? 

    string global = "^testGlobal";
            object[] Subs = new object[1];
            Subs[0] = "node1";

            try
            {
                IRISIterator iter = iris.GetIRISIterator(global, Subs); 
               foreach (var item in iter)
                {        
                    Console.WriteLine((string)(iter.

I am trying to move us to Securing the Management Portal using Apache and the Web Gateway.

Our Development environment/namespace only has 1 server, but both Test and Production have failover/DR mirroring containing 3 servers for Test, and 3 additional servers for Production. 

• Development - 1 server
• Test -2 server's setup for Failover, and 1 Async DR Mirror
• Production - 2 servers' setup for Failover, and 1 Async DR Mirror

In Test and Production, the mirroring is setup using an Arbiter and the VIP address is controlled at the Hardware level.

Hi All,

I am preparing for InterSystems IRIS Core Solutions Developer Specialist Certification. I have completed the desired syllabus. Does anyone have any questions dumps. I have already completed the practice paper on Intersystems website.

Has anyone tried AWS Batch with InterSystems IRIS docker images?

I have a noninteractive workload (but it requires internet access from the job to deliver results), so I'm considering using it as a simpler alternative to ECS since Fargate backs both, and that's enough for my use case.

I wonder if anyone tried and cares to share the results, issues, cfn templates.

I'm not sure what the purpose of this is, but the Management Console causes the browser to refresh periodically. If you're in a form or an editor such as the DTL or Routing Rule editors, you may lose work unless you save frequently. This did not occur in Caché 2018 and earlier releases.

I've had a couple of incidents where I've created a number of rules in the DTL editor, answered the phone or stepped away for a few minutes, then come back to find any work since the last save erased.

I've noticed this in both 2019 and 2020 releases of IRIS.

Heads up!

I'm scraping my way through some code that's been around for a while, and came across the use of $ZTRAP and (dear GOD) GOTO for trapping and handling errors.

In an effort to "modernize" it and make it, I don't know, less M-ish (sorry old-timers!), I'm replacing it with Try/Catch blocks.

Some questions:

1. Is this a dumb idea?
2. Anything I should look out for?
3. Did I hurt anyone's feelings?

And if the answer to number 3 is Yes, my deepest apologies ... I love you guys! 🤩

Hi Developers!

Want to raise security discussion today!

Let's discuss how InterSystems security for applications works. In general, the concept is clear: we have Resources (what to protect), Roles which combine a set of privileges and accesses to Resources and Users which can have this or that Role.

But there is also a concept of Application which also could have a Role.

So you either provide a Role for a User or for an Application.

What do you use in production? What is your strategy and why? Pros, cons?

I'm looking into finding ways to  fetch data from cache efficiently and work with it with python - specially pandas.

i tried the following but i'm wondering if this is the most efficient way?

to run the stored procedure as %ResultSet inside cache in a classmethod and serialize the data to JSON

and then call that class method from python

 Class User.RegObj Extends %RegisteredObject
{ ClassMethod runAlpha() As %Library.DynamicAbstractObject
{
set QHi=##class(%DynamicAbstractObject).%FromJSON("{}") set rs=##class(%ResultSet).%New("User.Person:alpha")
set pr=rs.Execute("","") set idx=0 
while rs.

Hi developers!

Do you know a CRM that is built with InterSystems IRIS or Caché or Ensemble on a backend?

Is anyone using the IPM client (e.g., running commands like zpm "install somepackagename") on an IRIS version earlier than 2022.1?

We're thinking about raising the minimum supported version so we can use Embedded Python in IPM. I'm curious if this would impact anyone. Of course, you'd be able to continue to use an earlier version of IPM.

Hi Developers!

InterSystems IRIS stores everything in globals and if we use ObjectScript classes to persist data class documents globals it uses in storage. But if you use globals for calculations, temporary storages, for special indexes or for some other purposes - how do you document it?

Possible options which come to my mind:

1. Macro

#define Array ^MyGlobal

usage:

s $$$Array(1)=1

2. Class parameter

Parameter Array ="^MyGlobal";

Usage:

s @(..#Array)@(1)=1

3. Documentation comment

Just document it to have it in a class documentation

/// ^MyGlobal is used to store my data

What do you do?

Maybe anyone has a working example?

This is what I have tried: (like in the documentation)

I get no messages but tSC is:

tSC="0 "_$lb($lb(8104,"<GATEWAY> java.lang.OutOfMemoryError java.nio.Bits.reserveMemory(Unknown Source) Direct buffer memory",,,,,,,,$lb(,"USER",$lb("e^OnAsStatus+1^%Net.Remote.Exception.1^1","e^AsStatus+1^%Exception.AbstractException.1^1","e^ReceiveMessage+5^%External.Messaging.Client.

Hi,

what is our experience of Microsoft Dynamics integration with IRIS/Ensemble ?

If you have any experience with IRIS/Ensemble using interoperability flows with Microsoft Dynamics, please share it is this discussion.

Best regards,

Sylvain

When I try to debug using the docker image intersystemsdc/iris-community it is failing. If I change to intersystemsdc/iris-community:2022.3.0.555.0-zpm, I have success.

Sorry, change to: intersystemsdc/iris-community:2022.1.0.209.0-zpm