Hello everyone,

I'm trying to perform a full backup using DO ^BACKUP, but the database keeps skipping the restoration. Does anyone know what I could do to allow the restoration?

Device: /usr/OLD/BACKUP.cbk
This backup volume was created by:
   IRIS for UNIX (Red Hat Enterprise Linux for x86-64) 2021.1
The volume label contains:
   Volume number      1
   Volume backup      AUG 21 2023 06:45PM Full
   Previous backup
   Last FULL backup
   Description
   Buffer Count       0
Is this the backup you want to start restoring? Yes => Yes
The following directories will be restored:

Hi,

Here are the requirements for implementing a new project using FHIR and JSON.

The FHIR JSON resource types - Patient, Encounter, etc. - need to be converted to HL7 messages using DTL.

Does %JSONImport() allow direct conversion of JSON into HS.SDA3.Patient objects?

Could anyone suggest an easy way to convert FHIR objects for DTL use?

Hi All,

Been trying to setup a iris 4 health community version along with a webgateway bothing utilizing docker. The documentation seems a little sparse when it comes to configuring each of these to work together, especially when it comes to utilizing the Webgateway to front end the MGMT pages for Irirs 4 Health.

I know there is a github repo that has a docker compose file, but that doesn't see to provide a light on what needs to be configured in order for it to work.

I know that the community version still includes a PWS but as a developer, I'd like to mock a production environment as closely

Hello,

I have set up a Docker image with IrisHealth Community Edition and created a backup of all databases with the Management Portal. Obviously, the restore requires a different way, i.e. a terminal or session needs to be started to use a "Do ^DBREST".

Due to the manual first a session (which is probably same as iristerm terminal) needs to be started:

docker exec -it iris iris session iris

If I enter "DO ^DBREST", I get the answer:

<NOROUTINE> *DBREST.

I assume that when I start the session that way I get logged in as "USER", at least the prompt "USER>" indicates this.

Hey Community,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ How to Configure Firewall Rules in Health Connect Cloud

Would this replace a carriage return linefeed with a spacein a DTL?  $REPLACE(string,"\X0D0A\",$CHAR(32))

InterSystems FAQ rubric

By specifying the start and end values ​​of the IDs for which you want to rebuild indexes in the arguments of the %BuildIndices() method provided in the persistent class (=table) definition, you can rebuild only the indexes within that range.

For example, to rebuild the NameIDX index and ZipCode index in the Sample.Person class only for ID=10 to 20, execute the following code (the ID range is specified in the 5th and 6th arguments). 

 set status = ##class(Sample.Person).%BuildIndices($LB("NameIDX","ZipCode"),1,,1,10,20) 

$LB() is the $ListBuild() function. The

I'm setting up a web application as CSP/ZEN to host a React SPA.

The FHIR® SQL Builder, or Builder, is a component of InterSystems IRIS for Health. It is a sophisticated projection tool used to create custom SQL schemas using data in an InterSystems IRIS for Health FHIR repository without moving the data to a separate SQL repository. The Builder is designed specifically to work with FHIR repositories and multi-model databases in InterSystems IRIS for Health.

The objective of the Builder is to enable data analysts and business intelligence developers to work with FHIR using familiar analytic tools, without having to learn a new query syntax.

In this article, I am demonstrating how to create a table column(formerly known as properties) with your custom datatype classes by using User defined DDL.

InterSystems Reports version 23.2 is now available from the InterSystems Software Distribution site in the Components section.  They are labeled InterSystems Reports Designer and InterSystems Reports Server and are available for Mac OSX, Windows or Linux.  insightsoftware elected to move from a  numerical number plan to a year-based numbering plan in 2023 so there are no versions 20 through 22;  versions increase from Version 19 to Version 23.  Note that the reports Server docker image will be available at a later date from the Container Repository.

This new release brings along some great

When installing IRIS, all the system AUDIT events are not enabled.

What is the fastest way to activate all events?

  System > Security Management > System Audit Events 

I'm looking for an efficient way in DBeaver to filter system tables (ex: belonging to a schema starting with "%").

By using a user with the %All role, DBeaver shows us a long list of system schemas, which forces us to go down the list before accessing the user tables.

I have a problem. Occasionally, I am getting locked out of IRIS because of password failures. However, the failures aren't necessarily related to my password.  We are using VSCode, and I have installed one or two proposed APIs for use with the software (because that's just how I am; I want to learn the new stuff).

Today, I had that problem again. The step that caused the problem was most likely when I was trying to switch the branch I was using and updating within VSCode. Let's say I was switching from branch "1A" to branch "2B". When I did this, IRIS caught two password errors:

You can see the

When creating the db using the Properties array, if I use a literal like "/iris/db/<instance name>/<directoryname>" it's created in the correct directory.

       set Properties("Directory")="/iris/db/InstanceName/DirectoryName"

but when it's executed with a variable, as in the example below,  it gets created in /iris/sys/<instance name>/mgr/

      set directoryPath="/iris/db/InstanceName/DirectoryName"
      set Properties("Directory")=directoryPath

 Is there any reason string literals work and variables do not?

Hello All,

How do I generate my own method for all properties in my class definition like auto-generated methods PropertyGet(), PropertySet(), PropertyGetStored().

Thanks.

InterSystems FAQ rubric

You can see the free available space for the database using the radio button "Free Space View" in Management Portal: System Operation > Databases.

And it can be obtained programmatically by the FreeSpace query of the system class SYS.Database.

It sometimes happens that due to an adverse event the AUDIT database (IRISAUDIT) has grown to such proportions that the disk it resides on is full and the daily purge cannot be expected to reclaim disk space.

As IRISAUDIT is a system database required at startup, there is no question of attempting to restart IRIS after simply deleting IRIS.DAT from the <IRIS ROOT>/mgr/irisaudit/ database, nor of hot swapping, by system manipulations trying to dismount, replace, remount, since it is simply not possible to dismount it.

IRISAUDIT database: mounting required when starting IRIS

IRISAUDIT base:

I cannot get any further hint from the error message in red in this screenshot. Is there any clue or details about the connection failure that I could look for?

InterSystems has also released IRIS as containerized deployments. This post is to demonstrate how InterSystems IRIS and applications those rely on IRIS a backend can be packaged into an image and be run in other machines in containers and how simple it is to do that.

A container runs image/s which have all the necessary executables, binary code, libraries, and configuration files. And the images can be moved from one machine to another, and  an images repository like Docker Hub can simplify that process.

I have used an application from Open Exchange for this demo.

Demo video: https://www.loom.com

InterSystems FAQ rubric

It can be obtained using AllFields query of %SYS.ProcessQuery class.

For the details, please refer to the document Process (Job)【IRIS】／Process (Job).

An example of execution in the terminal is as follows.

USER>set stmt=##class(%SQL.Statement).%New()
USER>set st=stmt.%PrepareClassQuery("%SYS.ProcessQuery","AllFields")
USER>write st   // you can call %Execute() when st = 11
USER>set rset=stmt.%Execute()
USER>while rset.%Next() { write rset.%Get("JobNumber"),"-",rset.%Get("Pid"),"-",rset.%Get("OSUserName"),"-",rset.%Get("CurrentDevice"),"-",rset.%Get("Routine"),"-",rset.

Hi,

I don't found how to get params send by a GET REST query (not in url but by request param).

this is config of the call in postman

I try to get %request.Data, doesn't work : Data is undefined

I try to get %request.GetCgiEnv("Data"), doesn't work, return ""

I do ZW %request and see that my parameter is present in cgi parameters, but I don't now how to access it.

Why I'm not getting OS level environmental variable in the IRIS for below actions:

CentOS termial:

[root@]# export TEST="test"
[root@]# echo $TEST
test
[root@]# iris session MYIRIS

Node: myiris01, Instance: MYIRIS

Username: User
Password: ********
NSPACE>s test = $SYSTEM.Util.GetEnviron("TEST")

NSPACE>w test

NSPACE>

Hi,
For a REST application, when a user connects, I have to write a message in an application log.
The login is processed by the /login routine by default.

How can I add a process to the login process?
Is there a callback ?
Should I create a login method in my class that extends %CSP.REST ?
I'm not sure and can't find information in the documentation ?

I try this (not working) :

<Routes>

<Route Url="/lists" Method="GET" Call="GetLists" />

<Route Url="/me" Method="GET" Call="GetUserInformations" />

<Route Url="/changePassword" Method="PATCH" Call="ChangeUserPassword" />

<Route Url="/utilisateurs"

Hello guys,

I want to move a development IRIS for Health database to another server. I will do this manually for specific reasons. If I simply copy the /mgr folder along with all the files (.DAT, .GBK, etc.) and configure it in the new server, will it work?
Best regards.

Hello, 

I have a .NET based web application and would like to front end it with an Iris4Health server, ie possible using the CSP or web application url's to reoute to the requests into the docker container. Kinda of like a reverse proxy but using Iris for health. Is the external language server a good use for this or is that only for direct interaction with I4H? 

I know you can create a custom container with the app copied into it, but not sure if that is the best way.

Any suggestions on how I could accomplish this would be appreciated. 

Hi, 

I'm currently looking to deploy a production with readymade auditing functionality. I can currently call user defined audit entries using $SYSTEM.Security.Audit() but I'm finding to display these posts properly I need to create User-Defined Audit Events on the management portal, otherwise they are displayed as "UserEventOverflow"/"AddedUnknownUserEvent" .

We have this intermittent issue with a particular supplier message , just wondering if anyone has further insight around the two errors we get when we see this. 

We use the out of the box TCP hl7 adapter. 

We first seem to get this incomplete hl7 message resulting in an error like 

Discarding leftover input 'MSH|

This is not unexpected as the final obx has not dot the description of OBX:2.2 ect. 

OBX|53|TX|NCDAC^

The next message will have the error 

Developing with InterSystems Objects and SQL – IN PERSON September 11-15, 2023   9:00am-5:00pm US-Eastern Time

• This 5-day course teaches programmers how to use the tools and techniques within the InterSystems development environment to build high-performance transactional applications. Learners build a complex application using an IDE, object-oriented design, SQL and unit testing.
• This course is applicable for users of InterSystems IRIS Data Platform and Caché.
• Many benefits are offered by being physically in the classroom with our instructors for a more personalized educational experience.

Hey Developers,

Watch this video to learn more about the FHIR, how it came to be and the future of the standard:

⏯ The Concept of FHIR: A Healthcare Data Standard Designed for the Future