New post

#FTP

0

File Transport Protocol (FTP) is a standard network protocol used for the transfer of computer files between a client and a server on a computer network.

Learn more.

Hi,

I try SFTP connect by ObjectScript.
But occurred this error. Can't connect by SFTP key-pair authentication.

:ERROR #7510: SSH Error '-18': SSH Error [80101012]: Username/PublicKey combination invalid [80101012] at Session.cpp:458,0

Key pair was generate this way.
ssh-keygen -m pem -f ~/.ssh/id_rsa
"id_rsa" and "id_rsa.pub" is generated.
Passphrase is empty.

sftp command is connect successful.
ex.
sftp -i .ssh/id_rsa sftpuser@localhost

0 11
0 1.6K

Hi all,

We are delivering files to SFTP server using EnsLib.FTP.PassthroughOperation class and EnsLib.FTP.OutboundAdapter. But we are facing error below:

ERROR <Ens>ErrFTPPutFailed: FTP: Failed to Put file '' (msg='Error in SFTP Put('/cachesys/mgr/Temp/HC4IZVmI6w9gEw.sftp','/directory1/directory2/directory3/') ERROR #7511: SFTP Error '4': SFTP Error [80102004]: Operation Failed [80102004] at SFTP.cpp:750,0',code=0).

The SFTP settings is as follows:

Basic settings:

0 3
0 1.9K

Hello!

I'm currently trying to setup a SFTP Ensemble production to handle all of my SFTP transactions. It's been going well, but I'm currently running into an issue where it is saying it is unable to exchange encryption keys. Error Below:

Unable to exchange encryption keys [80101005] at Session.cpp:238,0' matched ReplyCodeAction 1 : 'E=R' resulting in Action code R

Any advice on getting around this would be appreciated.

0 3
0 360

Morning everyone,

I would appreciate some advice please- hopefully there is plenty of experts out there.

We are setting up an sFTP share between hospital trusts here in the UK and I have set the outbound operation up using a custom extension of EnsLib.HL7.Operation.FTPOperation.

We are configuring a VPN tunnel to run between the sites also so there is a bit of firewall / network routing to take place to enable the connection but to add in a complication we are on a mirrored cluster and usually present on a Virtual IP address.

0 2
0 459

Good Afternoon My InterSystems IRIS Peers,

I have the following issue that I need help with, I tried all possibilities that I know of, therefore I am reaching out to the community for some insight.

I have a SFTP service that pulling 2.5.1 DFT HL7 messages from our SFTP file server. The issue is that IRIS is transforming patients names and addresses that contain special chars UTF-8 to ANSI.

Examples:

è = è
é = é
í = í- .......etc

0 7
0 1.4K
Question
· Sep 5, 2019
Setting up sFTP operations

So we are in the midst of setting up a bunch of sFTP operations where we will have Ensemble send files to our various customers.

My questions about the set up are these:

1) For a simple test, I set up an Operation using EnsLib.FTP.PassthroughOperation. Is this the one I should be using?

2) if the receiving system has a username and password, then all I have to do is put that username and password into a Credential and assign that credential to my operation correct?

0 5
1 2.1K

In 2020 we implemented HealthConnect as our HL7 interface engine. Having completed this, we are currently evaluating whether it would be beneficial to migrate our managed file transfers from our current MFT software, MOVEit to HealthConnect. I am interested in hearing from any InterSystems customers who have previously used MOVEit and currently using HealthConnect for file transfer managment. Any feedback would be appreciated.

0 2
0 312

We have a custom FTP Service , and custom FTP adapter . Customization is just to find a duplicate file and for giving specific dynamic file spec pattern.
While running and polling for files, we are getting this error. Could you please help ? What's the issue and how to resolve it ?

ERROR <Ens>ErrFTPListFailed: FTP: Failed List for <FileName> (msg='Cache error in 'readResponse': <READ>zreadResponse+4^%Net.FtpSession.1',code=426)

0 1
0 397

Dear Community,

I need to collect a file from an FTP server over FTPS.

I have the :

  • credentials saved correctly
  • correct host and port informatoin
  • correct filepath I am trying to collect from
  • I have setup the SSL configuration in System > Security Management > SSL/TLS Configurations and this tests sucessfully

When I run the business service to connect it connects, but soon after connecting it fails to open the directory:

0 3
0 405
Question
· Apr 22, 2020
FTP adapter

Hi community,

I am now working with an ftp adapter. I have no problem connecting to the FTP server, but there are problems with interacting with files. Has anyone had any experience with an FTP adapter, such as getting/modifying/deleting files?

2 4
0 571
Question
· Nov 11, 2019
Creating an FTP Report

Good morning all,

A question to see if anyone out there is already doing this.

We have built a custom BS based off of the EnsLib.FTP.InboundAdapter. We have our processes wake up (using the Scheduler), grab the files in the directory, stay awake for a while, and then go back to sleep.

Each file goes through on its own message. So we can trace each individual file and we know if it made it successfully or not.

0 1
0 358

Hi All,

i have a issue in getting the complete file path when using the FTP Adapter in service.
EnsLib.FTP.PassthroughService / EnsLib.FTP.InboundAdapter

I need to know the folder name (including sub folder) where the new file is found by the service when looking up for new files.
The normal file class is working good as expected

More details below,

In the below two examples you can notice folder name is fetched by normal File adapter, but in FTP only the file name is available.

0 1
0 449

I have a service named FTP_In that is of class EnsLib.HL7.Service.FTPService. It picks up files from multiple subfolders and sends them to an EnsLib.HL7.MsgRouter.RoutingEngine. What I want to do is somehow capture the subfolder as a variable for use in the routing rules. Is this possible?

Let's say I have the following files and directory structure on my FTP Server

0 6
0 592
Question
· Jul 28, 2020
Explicit FTPS in Cache

We use the %Net.FtpSession class to perform FTPS file transfers. This has worked fine with Implcit FTPS servers but crashes when trying to connect to an Explicit FTPS server. Explicit FTPS has a slightly diffferent negotiation in the intitial connection and different ports.

Has anyone gotten Explicit FTPS working with the Cache classes?

0 2
0 509
Question
· Jun 11, 2020
SFTP connect

Hello,

I'm trying to upload file to SFTP server.

I have access to SFTP server .
My code is bellow

Try {
Set sftp = ##class(%Net.SSH.Session).%New()

0 10
1 1.8K

I have been using %Net.FtpSession and while it works, its handling of file/directory listings from an FTP server is less than ideal and, while this is due to the FTP protocol itself, the class could be written to handle this as would an FTP client such as FileZilla and command line/class FTP handlers for other languages. I was wondering if anyone knows how the Ensemble adaptor works with this in case it provides code that would help, though the source does not seem to be available. Below are the issues I see in FTP, some are based on past experience writing our own FTP handler in the past

1 2
0 455

I am using Ensemble FTP adapter to monitor file directory for files that require SFTP transfer to remote server using public/private keys for remote server authentication.

This works great in my engineering development space where file protections are loose.

I want to apply "principle of least privilege" regarding the public and private key files specified in FTP Outbound adapter Business Operation.

Can anyone recommend (Linux) permissions that allow Ensemble to execute the SFTP operation but minimizing access to the key files?

0 1
0 887

Hello everyone,

We have a process that is listening to an FTP service to collect some CSV files and process them. The process works correctly and when it ends it clears the directory waiting for it to enter some other file.

We have been receiving the following error message for a long time:

1 4
0 902

Thanks for all replies in advance. We have a security vulnerability that we have to get rid of. We use Putty software to connect to cache as a terminal allowing several users to do maintenance work in cache. this uses telnet Plain text. I know that we can configure telnet to be encrypted using the super server service and I'm looking for software that can work like Putty as a terminal using encryption compatible with cache telnet encryption. If I have cache installed on my PC and setup a connection to the server using Kerberos with encryption and use the terminal option to connect to

0 5
0 873
Question
· Mar 22, 2017
Unable to sFTP to vendor

We have many sFTP business operations that work successfully. I just modified an existing one to point to a new IP and Port, as well as use new credentials (username and password only). When I attempt to sFTP a file, I receive the following error.

0 5
0 2.6K