Using the FHIR DEMO, I have pieced together how to make a FHIR Request using OAuth against an External FHIR Repository. When I execute the Patient search (HS.FHIRServer.Interop.Request), I get a HS.FHIRServer.Interop.Response that has a Quick Stream ID, which I then use to convert the Quick Stream to a JSON Dynamic Object. if I do a trace on the Raw JSON Object, I am able to pull out single elements, however I want to pull the raw JSON into a defined Class Structure.

0 2
0 52

Hello everyone,

Recently, I've been working on a Business Process that processes a large JSON FHIR message containing up to 50k requests in an array within the JSON.

Currently, the code imports the JSON as a dynamic object from the original message stream, obtains an iterator from it, and processes each request one at a time in a loop.

0 2
0 151

I am trying to work with the FHIR Object Model where I convert an incoming HL7v2 to SDA then FHIR. From here I would like to be able to process the FHIR Object by deserializing it to a Bundle object using the following code my problem is I keep on getting an error which is not explaining much about what is wrong with what I am doing any help will be appreciated thanks.

0 3
0 98

Hi Team,

I am trying to use the inbuilt class: EnsLib.HL7.Service.FileService to pass through an HL7 ADT message as a part of an HL7 to FHIR transformation. We have a client requirement, where we are receiving an NTE segment as a part of the ADT message. I am trying to map the NTE segment to an OBX Segment. I need to implement a counter for OBX segment whenever a NTE segment is found and map the NTE fields to the new OBX segment

How do I implement the counter for OBX?

Thanks

Santosh

0 1
0 69

Hi folks!

Researching FHIR bundle transactions.

The idea is that you can post a bundle to a FHIR server with a set of resources. And you can send it as a transaction, so only all the resources will be published or neither.

E.g. I send a bundle of two resources: patient and its observation.

The observation resource should reference an existing patient. But it probably doesn't exist yet on the server and goes within the same bundle.

For this purpose there is a way to have a temporary id in the bundle, to let resources reference ids.

0 6
0 218

Hi,

I found an issue while fetching records from FHIR DB, I am getting below error thou FHIR repository have the records with the corresponding id

{

"resourceType": "OperationOutcome",

"issue": [

{

"severity": "error",

"code": "not-found",

"diagnostics": "<HSFHIRErr>ResourceNotFound",

"details": {

"text": "No resource with type 'Appointment' and id '21'"

}

}

]

}

0 3
0 84

Hi everyone,

I'm looking for a strategy for dividing a large FHIR message, in a post request, into smaller parts.

I have found the paging modifier for the GET request, but not a similiar one for the POST request. Maybe the 'batch' type of a Bundle could help me to indicate this aim but there aren't any attribute to say the total or the i-th element.

Do you know of any method for implementing 'paging' in a post request?

0 2
0 112

Hi,

I have a scenario where I recognize that I have a duplicate patient in FHIR , both have a different set of data attached to them (Specimens / Observations / Conditions) and I want to transfer all the data from patient X to patient Y, and maybe mark patient X as not relevant or delete it IDK yet.

since Patch currently supports only single patch,

"The Conditional Patch query identified more than one resource."

1 5
0 175

Hi community,

I´ve setup a local FHIR server via the framework functionality und set a service config name for the created endpoint since I plan to use a production based FHIR server. I´ve created an additional ressource "FhirClientRessource" and role "FhirClientRole" as well as a user named "FhirClient". The Role resource "FhirClientRessource" ist set as "required resource" in the FHIR server configuration page. The user "FhirClient" is member of the Role "FhirClientRole" which in turn holds RWU priveliges on the "FhirClientRessources".

0 4
0 191

What changes are to be made while customizing a FHIR server package when adding a new field. As provided in the documentation, we have a sample JSON package of favorite color and it is added in the table, but when we are adding a new field 'Insurance', it does not imports the package and says package already exists. We have three files of JSON

1) Package.JSON

2) SearchParameter.JSON

3) StructureDefination.JSON

What should we have to change for adding new field.

0 2
0 161

Hi colleages!

This is very easy to setup a FHIR server in InterSystems IRIS for Health.

It could be even one IPM command with this package:

USER>zpm "install fhir-server"

But which FHIR portal could you recommend to use?

I used to work with this one, which is very easy to install too:

USER>zpm "install fhir-portal"

but it doesn't work at the moment and I'm not sure if its main contributors @José Pereira and @Henrique Dias plan to support it.

What do you use? What do you recommend? Ideally installable with IPM package manager. Thanks!

2 3
0 216

Hi folks!

Examining FHIR profile validation with InterSystems FHIR server. FHIR profiles is a very useful feature of FHIR standard that helps an organization or solution to establish constraints to a very disperse FHIR standards that are relevant to a particular business solution. Learn more on FHIR profiles.

I created a very simple FHIR profile with the following JSON:

0 6
0 455

Hi community,

I am looking for an implementation strategy to create/update organizations in a local ISC based FHIR server. Thoase organizations do have a certain dependancy to one another. For Organization resources the "partOf" property symbolizes that. It is planned, that a Interoperability Production (supporting FHIR Server) receives a bundle which contains a batch export of all organizations of a customer (Hospital). The task is to bring those data into the FHIR server create and/or update organization.

0 9
1 317

I have created a FHIR endpoint and send the FHIR resource to FHIR Interoperability production class which is HS.FHIRServer.Interop.Service through the the created endpoint(/r4). I can able to see/get the HS.SDA3.QuickStream(It use CacheTemp.HS.Stream temporary global) on the fly(In between the process). I'm unable to get the FHIR resource from the QuickStream once the process completed. Is this HS.SDA3.QuickStream is wiped out from the system once process completed?

0 1
0 231

I have been successfully able to transform hand-written medical test results documents to HL7 ORU_R01 v2.x, then to SDA, which will be trasformed to FHIR or C-CDA.

However, I have a category of documents which contains reference range in multiple date formats, which are measured for each gestation period.
For example, below is one of the documents.

Analyte: HCG, Value: 1968, Unit: mlU/mL

0 4
0 203

Hi all,

I am looking for a way to serialize fhir content received via interoperability adapter into it´s corresponding ISC model class (e.g. HS.FHIR.DTL.vR4.Model.Resource.DiagnosticReport) for later use. In my opinion the outline to accomplish this would be something like

1) Receive the FHIR data
2) Get quick stream containing the JSON data
3) Examine if bundle or single ressource
4) For resource serialize to coressponding model class (HS.FHIR.DTL.vR4.Model.Resource.*)
5) further use of newly created object of type HS.FHIR.DTL.vR4.Model.Resource.*

0 3
0 226

Hi.

We are going to have basic patient demographic data coming in to Cache via a webservice. I thought that I should define the input as XML something like the FHIR format (with UK extensions).

In the past we've input XML streams and used the %XML.Reader to convert them to matching classes successfully, so I thought it would be easy. However, I've found that the FHIR format stores everything in attributes like:

0 5
0 241

In article

https://community.intersystems.com/print/518106

Traceback (most recent call last):
File "c:\Users\rochesterd\PythonScripts\fhir_stuff\fhir-client-python-main\fhir-client-python-main\src\client.py", line 57, in <module>
patient0 = Patient.parse_obj(patients_resources.search(
AttributeError: 'NoneType' object has no attribute 'serialize'

0 8
0 209

Newbie here...

I am looking to use fhir to gather patients in our end point that have a certain diagnosis and or certain insurance.

Is this what fhir can be used for?

In the past I have done the normal SQL query/extract to CSV file. Looking to use fhir for this for future.

Thanks in advance for your time

Dean-O

0 1
1 295