Hi Community!

We're happy to share the next video in the series dedicated to Gen AI on our InterSystems Developers YouTube:

⏯ Prompt before the prompt - third step of GenAI model training

I have a custom IPM resource processor like:

<Resource Name="example.json" ProcessorClass="OSEX.ipm.demo.IpmResourceProcessor" Foo="from manifest Resource attribute"/>

What is the best practice to deploy the custom resource processors to the IRIS instance? It can't be part of the module that uses it for obvious (?) chicken-egg situation.

My best idea atm is to put all those custom processors into a (library) module and all modules using any of them just have a dependency to the custom processors module.

In a Business Process (Ens.BusinessProcessBPL), how can you correctly call a classMethod?
I know we can call it in a block <code>  :

Or in a <assign>

Are there other ways and/or good practices?
Thanks
Corentin

Hello,
Please, we would need your help 🙂:

In a development environment, we have added quite a few presentation contexts to the DICOM configurations (the associations). We would need to find a way to export them from this environment to make it easier for us to import them in PRO (and avoid doing it by hand one by one).

Hi Community,   OpenAPI-Client Gen has just released, this is an application to create an IRIS Interoperability Production client from Swagger 2.0 specification.   Instead of the existing tool ^%REST that creates a server-side REST application, OpenAPI-Client Gen creates a complete REST Interoperability Production client template.

Install by ZPM:

zpm "install openapi-client-gen"

  How to generate production from Swagger document?   It's very simple.

Open a terminal and execute:

Set sc = ##class(dc.openapi.client.Spec).generateApp(<applicationName>, <Your Swagger 2.0 document>>)

I'm running a query, joining nine tables together. When I run it with a SELECT COUNT(*) I get about 200,000 rows. When I run the SELECT with the columns I want, I get about 2,700 rows. Is there something inherent with the queries that limits the result set size, or anything I can do to make sure I'm getting back all the results? Rather, than trying to run it about 100 times limiting all previously gotten accounts.

What table would I find the MRN in? I'm trying to write a crystal report and pull that field, but I cannot seem to find it in any of the tables, to be able to add to the report.

Thank you in advance for any help.

Hi! I am trying to export Cache data to my SQL database and am trying to export the schema as well.

The Data Export wizard on the Management Portal only allows me to export the data but not the schema. Is there anyway to get the schema exported as well?

Hi Guys,

I'm calling the expandAll() method to expand the whole tree structure but for some reason its only expanding the root folders but not all elements under those folders ?

var tree = zenPage.getComponentById( "MyTree");
tree.expandAll(true);
 

Thanks

Hello,

Is there any document regarding the embedded sourceControl in HealthShare management portal GUI?

It has Status, Settings,GitWebUI,AddtoSC,Sync,NewBranch,SwitchBranch,Import, ImportForce buttons, I am pretty new to this and I am wondering what these buttons really do behind the scene and when I need to use them.

Thank you

I want to execute initialization code on the start of my business process.

I thought OnInit is a way to go, but apparently not - ^dbg global remains empty:

Class Test.BP Extends Ens.BusinessProcess
{
Method OnInit() As %Status
{
    Set ^dbg = 1
    Quit $$$OK
}
}

Ideas?

Hello,

Could not connect to DB using IRIS studio, and I don`t know why, maybe someone can help.

Checked already user - it have %All rights

Also, tried using _SYSTEM user, but the same error is occured.

Does anyone have suggestions, I will appreciate your help.

Providing some screenshots regarding this problem.

Is anyone using the IPM client (e.g., running commands like zpm "install somepackagename") on an IRIS version earlier than 2022.1?

We're thinking about raising the minimum supported version so we can use Embedded Python in IPM. I'm curious if this would impact anyone. Of course, you'd be able to continue to use an earlier version of IPM.

How do you configure it to have source control on a namespace accessed via the InterSystems Server Manager extension?

An example from the video explains only how it will work with a cloned git repo on a local machine (PC/Mac), but so far, I can't get it to work on a remote development server (replacing existing remote Studio via RDP with local VS Code).

I built a monitoring system in Grafana using the IRIS API /api/monitor/metrics (reading with Prometheus) but I noticed that the RAM usage shown was below that shown by the operating system.
I installed the Zabbix agent and the usage values ​​were higher, but with a line with the same highs and lows but shifted.
The metric in the API is iris_phys_mem_percent_used, described as "Percent of physical memory (RAM) currently in use", in Zabbix it is the Item tag: "component: memory" item: "Memory utilization".

Image below of the graphs in Grafana:

So I know we can run routines using both XECUTE or @ 
However both of them run slower than just running the routine without it. (that is because as far as i understand, XECUTE command for example will re-compile before running?)
the question is: how can I run a routine by name - and keeping the performance as good as possible?

As the title suggests, I would like to programmatically export each HL7 schema category as XML, either as a stream object or to a file. How would I go about doing this?

i am trying to embed a dynamic SQL into Objectscript code , but the %NEXT() will return 0 , however when i copy the same query and run it in the SQL bit it will give me the result i want 
the code :

we've set up a new RHEL server 7.9  

I was able to get the portal to work partially from running this command

[root@facsp1 DSA200]# firewall-cmd --zone=public --add-port=57772/tcp --permanent
success

though as I said it was partial. any idea where else I need to change to make this work?

thanks

Paul

It's not supported at the moment but is it possible to implement the Sonatype Nexus (or JFrog Artifactory) support based on the current (or upcoming) IPM version?

In repo command help I see there is a support for filesystem repositories (which I have not yet tried) and my current (hopefully not far-fetched) interpretation is the IPM is designed to be able to support different repositories:

As the title suggests, I would like to programmatically export each individual data lookup table as XML, either as a stream object or to a file. How would I go about doing this?

I'm trying package IPM command but I'm getting the following error:

zpm:IPMTEST1>package -verbose -only -path /home/irisowner/ osex-ipm-hello

[IPMTEST1|osex-ipm-hello]       Package START
Exporting 'OSEX.ipm.hello.Hello.cls' to '/home/irisowner/src/OSEX/ipm/hello/Hello.cls'
Exported to /home/irisowner/module.xml
Module exported to:
        /home/irisowner/

[osex-ipm-hello]        Package FAILURE
ERROR! ObjectScript error: <VALUE OUT OF RANGE>zConstructTar+19^%ZPM.Utils.FileBinaryTar.1

What's wrong here?

I can see all the correct module files created:

We are excited to announce the newest addition to our early access program - the Health Data De-ID tool.

Hey Community,

Watch the new video on InterSystems Developers YouTube:

⏯ Securing AI Implementations - Moving from Experimentation to Production @ Global Summit 2024

Description

This is a template for a FastApi application that can be deployed in IRIS as an native Web Application.

Installation

1. Clone the repository
2. Create a virtual environment
3. Install the requirements
4. Run the docker-compose file

git clone
cd iris-fastapi-template
python3 -m venv .venv
source .venv/bin/activate
pip install -r requirements.txt
docker-compose up

Usage

The base URL is http://localhost:53795/fastapi/.

Endpoints

Hello,

I am using the following: 

s status = $SYSTEM.OBJ.Load("myClassName," "c")

and while trying to compile it i get an error that a property or method does not exist, more specifically:

Method or Property 'basicToolbar' does not exist in this class.
it's important to say - basicToolbar DOES EXIST! If i manually compile this class through the studio, it will work and is runnable. 
only when using the Load command i get this error. 
what could possibly be wrong?
i also tried combination of different flags but fail to understand how is this possible.
 

If both fields are numeric and the result of subtraction of field1-field2 is positive, only then put the result is a data field.

I am doing this within an Iris DTL.

I don't find any functions like IsNumeric(). Once I get that, I can test if field1>0 and field2>0, do the subtraction, and test if diff>0.

I just need a function to determine if they are numeric, rather than some cumbersome way like a regex where the only characters are 0-9.

I see functions in documentation but don't see them used at tests, only in WRITE statements.

Thanks,

Jonathan

I have a question about the routing of IIS.

If I have a javascript application that has a single entry point app.html. Is it possible to configure the IIS server such that both the urls

addr:port/entry1

addr:port/entry2

to provide the same app.html and let the javascript code from application decide what component to load next, depending on the path of the URL ?

My IIS server is configured such that when I do a GET url1, ir tries to send entry1.html , respectively entry2.html when I do GET url2.