Hello Community,

I'm trying to import WSDL service descriptions from Gematik (https://www.gematik.de/) to allow communication with the german TI infrastructure using the TI connectors webservice interface over a IRIS healthconnect SOAP operation. For import I'm using the SOAP Wizard Add-Inn from Studio.

The WSDL files can be found here: https://fachportal.gematik.de/fileadmin/Fachportal/Downloadcenter/Schemata-_und_WSDL-Dateien/Schema-_und_WSDL-Dateien/OPB3.1_Schemadateien_R3.1.2_Kon_PTV3_20191002.zip

The interface specification and some helpful graphics are published here: https://gemspec.

Hello,

It looks like command D ^%G from webterminal does not respect parameter "Screen size for paging"

In this example it should show only 2 results and ask for more, as it does in a pure terminal session

From webterminal

SQX > D ^%G
Device: 
Right margin: 80 => 
Screen size for paging (0=nopaging)? 24 => 3
For help on global specifications DO HELP^%G
Global ^["TAB"]TBS("URGZN",)
^TBS("URGZN","AMB")="A#Ambulatori#01"
             "BOX")="A#Boxos#01"
             "CHB")="A#Càmara Hiperbàrica#01"
             "COR")="P#COR"
             "ESP")="P#ESP"
             "OBP")="P#OBP"
             "OBS")="A#

I'm trying to use embedded python code that receives an Iris %Stream.GlobalBinary and uses image manipulation library PIL.

Because PIL can't work with IRIS %Stream, I need to convert the image to python bytes.

This process seems to have very bad performance compared to writing to a file and then loading it from a file in python.

Is there a better way to send a stream into python? The conversion code I'm using is below.

Thanks.

defiris_stream_to_bytes(stream):
	stream.Rewind()
	s = ""whilenot stream.AtEnd:
		r = stream.Read(1024)
		s += r
	b = bytearray()
	b.extend(map(ord, s))

Hi Developers!

We are happy to present the bonuses page for the applications submitted to the InterSystems "Bringing Ideas to Reality" 2024 Contest!

See the results below.

Recently, I needed to run WebGateway on an additional port but with a twist - this port should publish only one web application.
At first, I thought about configuring Web Gateway to allow only specific web applications (~urls), but Web Gateway configuration is per Apache configuration:

LoadModule csp_module_sa "/opt/webgateway/bin/CSPa24.so"
CSPModulePath "/opt/webgateway/bin/"
CSPConfigPath "/opt/webgateway/bin/"

And while LoadModule has two allowed contexts, server config and virtual host, the csp module must be loaded once in the server context.

But we can use two VirtualHosts and here'

Hi Community,

It's voting time! Cast your votes for the best applications in our "Bringing Ideas to Reality" Contest:

🔥 VOTE FOR THE BEST APPS 🔥

How to vote? Details below.

I have started working on utilizing Epic on FHIR about a month ago.

Creating a Public Private Key Pair

mkdir /home/ec2-user/path_to_key
openssl genrsa -out ./path_to_key/privatekey.pem 2048

For backend apps, you can export the public key to a base64 encoded X.509 certificate named publickey509.pem using this command...

openssl req -new -x509 -key ./path_to_key/privatekey.pem -out ./path_to_key/publickey509.pem -subj '/CN=medbank'

where '/CN=medbank' is the subject name (for example the app name) the key pair is for. The subject name does not have a functional impact in this case but it is re

The InterSystems platforms have always offered dynamic documentation of the packages and classes in a namespace, a feature known informally as Documatic. But what if you need to publish this class reference information on a website without requiring the site to be connected to an IRIS server containing the actual classes?

For my entry to the December 2024 Developer Community “Bringing Ideas to Reality” contest I decided to implement the idea of a generator that produces a static set of class reference pages . And since I chose to leverage the well-established Doxygen tool I named my tool Doxy

If one of your packages on OEX receives a review you get notified by OEX only of YOUR own package.   
The rating reflects the experience of the reviewer with the status found at the time of review.   
It is kind of a snapshot and might have changed meanwhile.   
Reviews by other members of the community are marked by * in the last column.

I also placed a bunch of Pull Requests on GitHub when I found a problem I could fix.    
Some were accepted and merged, and some were just ignored.     
So if you made a major change and expect a changed review just let me know.

I am attempting to create a Foreign Server/Table so I can pull some information in from MS SQL server via JDBC connection, but as soon as I create the Server/Table and logout the Foreign Server disappears.

CREATE FOREIGN SERVER Epic.Clarity 
   FOREIGN DATA WRAPPER JDBC CONNECTION 'MS-EpicClarity'

logout, then run 

the documentation - Defining Foreign Tables | Using InterSystems SQL | InterSystems IRIS Data Platform 2024.3 mentions "A user that creates a foreign server must have the %MANAGE_FOREIGN_SERVER administrative privilege" but I am not finding that security setting to give to my

Monitor incremental changes in the database through scheduled tasks, display change trends through charts, set alarm thresholds, and write information to messages.log

How to use it

You can install it through Docker or ZPM

Deploying with Docker Prerequisites

Make sure you have git and Docker desktop installed.

Installation

1.Clone/git pull the repo into any local directory

git clone https://github.com/Sara771dev/Database-Size-Monitoring.git

Open the terminal in this directory and run

docker-compose build

Run the IRIS container

docker-compose up -d

ZPM Package Deployment

Open the terminal to

Here are the technology bonuses for the InterSystems "Bringing Ideas to Reality" Contest 2024 that will give you extra points in the voting:

• IRIS Vector Search usage -3
• Embedded Python usage -3
• InterSystems Interoperability - 3
• InterSystems IRIS BI - 3
• VSCode Plugin - 3
• FHIR Tools - 3
• Docker container usage -2 
• ZPM Package Deployment - 2
• Online Demo -2 
• Find a bug in Embedded Python - 2
• Code Quality pass - 1
• Article on Developer Community - 2
• The second article on Developer Community - 1
• Video on YouTube - 3
• YouTube Short - 1
• First Time Contribution - 3

See the details below.

VSCode is the most used IDE in the world. It is strategic have more extensions for VSCode for InterSystems technologies to keep increasing the developer community.

My new app IRIS VSCode Global Editor is an excellent sample to learn how to create extensions to IRIS. You can check it on https://openexchange.intersystems.com/package/IRIS-Global-VSCode-Editor.

To be ready to create extensions for VSCode

From https://code.visualstudio.com/api/get-started/your-first-extension you have all steps to get ready, but I will detail here to you.

1. Install Yeoman and start the creation of the extensio

👩‍💻Looking to boost efficiency in your development and deployment process? See how Docker containers can help.

As part of the Open Exchange competition Salford Royal (Dean White and Mark O'Reilly) developed a REST API for sharepoint as a template that works but can also be a starting point to your own Rest Applications 

Prerequisites

This is using the v1 REST sharepoint API you need a tennant id, client id, client secret and tennant name 

Setup 

Configure an OAuth server

The code in the middle is the tennant ID 

Create a client config name as whatever you want 

Set up the oauth client replacing your server ip with the ip of the server you are on (not the VIP address- if not part of a VIP lo

Visual Studio Code releases new updates every month with new features and bug fixes, and the November 2024 release is now available. 

Dear Developer Community,

It seems the Grinch got a little mischievous and swiped our recap before it could make its grand debut! 🎄💚 But don’t worry — our developer elves are hard at work tracking it down, and the full recap will be online shortly.

Hang tight, and we promise to have it back in time to spread all the holiday cheer (and the details you’re waiting for). Thanks for your patience, and keep an eye out for the return of our festive recap!

Has anyone tried the Ansible module for qlist in the article "Ansible modules and IRIS demo"?

There appears to be a bug in the qlist code as it assumes that the qlist output has an undocumented field.

I do not have the undocumented field in the output.when I run qlist so I keep getting the error "Unexpected IRIS qlist output format".

I assume that in most cases there is no undocumented field in the output.

In this module:
"iris_qlist.py"
in this test:
"if len(items) != len(IRIS_INSTANCE_DETAILS):
    module.fail_json(msg="Unexpected IRIS qlist output format", output=stdout)"
should be:
"if len(i

Every time I try to update an SQL table using odbc connection, I'm getting: ERROR <Ens>ErrException: <MAX $ZF STRING>zPrepareW+1^%Library.SQLGatewayConnection.1

Set sqlStatement = "UPDATE dbo.Table1 SET OriginalMessageText="_OriginalMessageText_"WHERE Id='"_Id_"'"
$$$TRACE("SQL Statement: "_sqlStatement)

I know that the problem is with the length of the ORU HL7 message  (that contains OBX base64 PDF file ) I'm trying to update in the table, but is there a way to fix this? other than truncating the message ?

I also tried this statement but it didn't work as well

Set sql = "UPDATE dbo.Table

Hi, Community!

Great news for HealthShare® customers! You can use single sign-on (SSO) to access your HealthShare apps more efficiently.

🔒Configuring Federated SSO in HealthShare(video, 11m)

Using SSO, you can access all your HealthShare apps at once, including HealthShare® Clinical Viewer and Care Community.

I'm experiencing an issue while compiling code in Visual Studio Code with "cuk" qualifiers.

When I try to compile, the following message appears after a while:

In VSC, the "cuk" qualifiers are always used as default and the following message is shown in the Output panel of VSC when a compilation is successful:

I'm unsure if it is possible to replace the cuk qualifiers with something else.

The issue doesn't occur when compiling the same class in InterSystems Studio, where, in this case, the qualifiers "cuk /checkuptodate=expandedonly" are used as default:

What can I do to solve the

A Quick Start to InterSystems Cloud SQL Data in Databricks

Hey Community!

Check out the new video dedicated to Gen AI on our InterSystems Developers YouTube:

⏯ AI Governance in IT solutions

• HealthShare Unified Care Record Overview – Virtual January 22-23, 2025
  
  • The HealthShare Unified Care Record Overview course is a great way for anyone to become familiar with Unified Care Record, but especially those who need to understand its capabilities but not how to configure HealthShare Unified Care Record.
  • This is a non-technical, instructor-led in person training course providing a comprehensive introduction to HealthShare Unified Care Record.
  • This course is for anyone who needs to know about the functionality and architecture of HealthShare Unified Care Record.  (If you need info

Very similar question posed here: https://community.intersystems.com/node/467496, but I am missing a piece of this:

How do I correctly call a EnsLib.HL7.MsgRouter.RoutingEngine class from the BPL?I can successfully call the BPL from the EnsLib.HL7.Service.TCPService, and I have the BPL created to delay then call the rule. And I set the context and the result location.

This rule is really basic just sending the HL7 content to a EnsLib.HL7.Operation.TCPOperation

The Visual Trace shows that the BPL is getting called, and the rule gets called after the delay, but the rule actions don't get

Please note- the resource should have expertise working in CCDA/FHIR implementation along with IRIS development experience.

IRIS for Health CCDA/FHIR IRIS developer 

1. Hard Core IRIS for Health Engineers who have experience working on IRIS for Health 
2.  CCD/FHIR and conversion services using SDA and DTL model (at least one production implementation of Conversion services to FHIR)
3. Have Good knowledge of GCP and GKE’s (IKO’s deployed on GKE environment or any K8 cluster)
4. Fine tune and debug IRIS Productions, assist L2 ops team when required
5. CICD/GIT knowledge

This article is part of a series showcasing the implementation of ideas from the Ideas Portal, where innovative concepts come to life!

Many InterSystems IRIS developers frequently need to create unit tests for ObjectScript classes — a process often done manually. The iris-tripleslash application revolutionizes this by automatically generating unit test classes with test methods for all the class methods of the original class. Developed by the talented Musketeers team — @José Pereira, @Henrique Dias, @Henry Pereira — this tool was inspired by an idea shared by @Evgeny Shvarov on the Ideas Portal: "Add a project that helps to generate unittests for an ObjectScript class".

When implementing deferred response there was a problem initially with a few responses which meant we had blank jobs spawned somehow. How do you get rid. All the operation does is:

SET sc =..SendRequestAsync($piece(..ForwardComponentNames,",", i),pRequest,1)

These all sent ok and tried to update status to 9 from 6 hoping it would clear the blank jobs but it didn't . The original issue has been resolved weeks ago.