Continuing on the journey of implementing %UnitTest, @Timothy Leavitt's Test Coverage package, and automated testing with Jenkins.

My question today: why do we utilize a unit test root directory?  

I've been defining packages and classes to write unit tests as I've been developing and I run the tests on the command line or using a routine file that is setup as a debug target which has been working great.  I use DebugRunTestCase() to do this (so the classes aren't deleted).

Prospects, Customers, and Employees can now download IRIS and IRIS for Health both Community and Enterprise editions on https://evaluation.intersystems.com 

This will allow for new features not yet released to be tested by prospective customers and current customers to sample the latest and greatest that is in the works.

Hi All,

Can you please guide me on how to programmatically write objectscript task to export audit log to a directory and what type of task should I set it to.

I want to achieve the same behaviour on the code as seen below 

Hi

I have a few Zen pages, one of which is implementation of  %CSP.StreamServer which I'm using to download a PDF file, however, any file downloaded is 5Kb smaller than the original. This is the code I'm using:

ClassExtends%ZEN.Component.page

And it is called via a hyperlink as follows:

GMECC.DocmanConnect.Pages.downloadGPNotOnHub?filepath=E:\blah\blah.pdf

The resultant file is correctly interpreted as a PDF, given the appropriate file name etc, but is 5Kb smaller

Any thoughts?

1. Fhir-client-python

This is a simple fhir client in python to practice with fhir resources and CRUD requests to a fhir server.
Note that for the most part auto-completion is activated, that's the main reason to use fhir.resources.

GitHub

• 1. Fhir-client-python
• 2. Prerequisites
• 3. Installation
  • 3.1. Installation for development
  • 3.2. Management Portal and VSCode
  • 3.3. Having the folder open inside the container
• 4. FHIR server
• 5. Walkthrough
  • 5.1. Part 1
  • 5.2. Part 2
  • 5.3. Part 3
  • 5.4. Part 4
  • 5.5. Conclusion of the walkthrough
• 6. How it works
  • 6.1. The imports
  • 6.2. Creation of the client
  • 6.3. Working on our resources

Hi Guys,

How do I create a JSON with the below structure pls:

{
  "field 1": "123",
  "field 2": "1.1.1",
  "field 3": "4.428",
   "Lines": [
    [ 0.00523, 0.00952, 0.01626 ],
    [ -0.00303, -0.00286, 0.00387 ],
    [ 0.00110, 0.00814, 0.00800 ],
    [ -0.00991, 0.00952, 0.00800 ]
  ]
}

thanks

In various tests I used both and found no real reason to prefer the one or the other.
Eventually I missed some limits. At least I didn't hit any.
What is the general opinion?
Where to use the one or the other?

Hello Team,

Need help on HL7 message processing without use of Ensemble. Any sample code on how inbound HL7 messages  using TCP/IP streaming mode can be processed through COS?

I ran into an interesting ObjectScript use case today with a general solution that I wanted to share.

Use case:

I have a JSON array (specifically, in my case, an array of issues from Jira) that I want to aggregate over a few fields - say, category, priority, and issue type. I then want to flatten the aggregates into a simple list with the total for each of the groups.

The Data Platforms team is very pleased to announce the 2021.2 release of InterSystems IRIS Data Platform, InterSystems IRIS for Health and HealthShare Health Connect, which are now Generally Available (GA) to our customers and partners.

Release Highlights

InterSystems IRIS Data Platform 2021.2 makes it even easier to develop, deploy and manage augmented applications and business processes that bridge data and application silos.

Hey Developers,

In the second part, you will learn how to build a FHIR Application with OAuth 2.0 and OKTA:

⏯ Securing FHIR Applications with OAuth 2.0 (Part 2)

The InterSystems Iris Fhirserver running on a Raspberry Pi Raspberry running as a FHIRserver

Raspberry running as FHIRserver

About a year ago I wrote some articles about the installation of the HAPI FHIRserver on a Raspberry Pi. At that time, I only knew the basics of the FHIR standard, little about the technology behind FHIR-servers and not much more about the Raspberry. By trying, failing, giving up and trying again I learned a lot.

Hi Guys,

is there a sample code where I can  basically send a HTTP request given a URL and authentication and handle the JSON response?

Thanks

Support is helping you troubleshoot a report. They want to reproduce a problem in their local system. Too bad they can't run your report, because the JDBC data source connection will fail. Or... is there a way?  

Hi guys,

How do I create a make a http request using curl, I've found samples on how to do it from a command prompt but how to create and make a http post request and get a response with ensemble object and functions?

I guess somthing like :

s req=##class(%Net.httpRequest).%New()

...etc

Or do I build a command run it in ensemble and get a response back, if so how can I do that ?

Thanks

Hi Guys,

I currently have a service that uses an InboundAdapter to get a JSON file and process it given that the client is pushing data to us, but now we have another client where we need to request the JSON file by sending a HTTP request then get the file and process it, kind of a Get rather than push, how can I create a service that handle that?

Thanks

The doc name is formatted lname,fname. How do I replace the comma with a ^ so I get lname^fname.

Hi Guys,

we have a class with over 24 million records and despite indexes querying is still slow, so we are looking to create a copy or clone of our current class have an scheduled task that runs every night or month, copy old records this new clone (eg. from last month)   and remove old them from our current class.

We are looking for 2 full time Middleware Design Specialist.  We have one of the largest (if not the largest) implementation of InterSystems HealthConnect and have a team that designs solutions for new use cases.  We are looking for strong developers that like to work on new patterns that are not your basic HL7 to HL7 interface.  These positions are 100% telecommute and you would be working with a team of very skilled HealthConnect developers.

You can find out a full job description and apply to these positions here --> https://ascensionjobs2-ascension.icims.

Hi all, 

any news about support of the IRIS platform in the DBeaver?  I only found this  https://github.com/dbeaver/dbeaver/issues/6289  Github issue. They are waiting for a new version of the JDBC driver. 

Thanks for the answer

Hi Guys,

How do I add another tablepane or gridview to make my tablepane look like expandable and collapses back as in the below pic?

so basically I would like to add a child tablepane or gridview for each row that populate the related details for it.

thanks

Hey Developers,

We're pleased to invite you to the upcoming InterSystems webinar called "What's New in InterSystems IRIS 2022.1"! 

Date: Tuesday, May 24, 2022
Time: 11:00 AM EDT

In this webinar, we’ll highlight some of the new capabilities of InterSystems IRIS and InterSystems IRIS for Health, including:

Hi All,

Since yesterday I am getting below error while calling InterSystems FHIR Server (FHIRaaS) API 

Looking Forward
Thanks

An anagram is a word or phrase formed by rearranging the letters of a different word or phrase, typically using all the original letters exactly once. For example, the word anagram itself can be rearranged into nag a ram, also the word binary into brainy and the word adobe into abode. Wikipedia

You will receive two strings returning true if the two arguments given are anagrams of each other. As usual shortest solution wins.

Hey Community, 

This session provides more detail about the Smart Data Fabric announcement at #VSummit'21: 

⏯ Introducing the Smart Data Fabric

Implementation

• B is the Winner Table: It holds the region and a numeric as ID. Short name is left empty for privacy protection in this Demo
• A is the table of all contests with dates
• X,C  are the arrays of prizes. They are projected as SQL tables.   When assigned they refer to 1 winner

User guide

Start the demo in Docker from IRIS console or in Webterminal

USER>do ##class(dc.rcc.Main).Menue()

Hi guys, I am not able to load the file codes on the terminology registry, do you know how the structure should look like when uploading terminology codes file under Registry namespace

Below is the error I am getting the below error

We are experience this with our own web app and even the demo/template here: intersystems-community/iris-fullstack-template: This template shows you how to build, test and deploy a simple full-stack application using InterSystems IRIS REST API (github.com)

When changes are made to CSS or HTML files, we can see the changes are saved to file in the Docker container by visiting the command line.  However, after refreshing, clearing cache, etc. the changes don't appear on the web application in the browser.  Viewing the source css in the browser, we see it's the old file.

I'm trying to connect to a MySQL database through a SQL Gateway (type JDBC) on a MacBook M1. Can't get the connection working, anybody any experience on this topic? 

1. Fhir-client-java

This is a simple fhir client in java to practice with fhir resources and CRUD requests to a fhir server.
Note that for the most part auto-completion is activated.

GitHub

• 1. Fhir-client-java
• 2. Prerequisites
• 3. Installation
  • 3.1. Installation for development
  • 3.2. Management Portal and VSCode
  • 3.3. Having the folder open inside the container
• 4. FHIR server
• 5. Walkthrough
  • 5.1. Part 1
  • 5.2. Part 2
  • 5.3. Part 3
  • 5.4. Part 4
  • 5.5. Conclusion of the walkthrough
• 6. How to start coding
• 7. What's inside the repo
  • 7.1. Dockerfile
  • 7.2. .vscode/settings.json
  • 7.3. .vscode/launch.json

2.