Ensemble

Syndicate content 71 

I am working on creating a DTL that can replace OBX segment with a string formatted NTE segment .  There is a class ImportFromString but it looks like that is not replacing the target message with the new formatted NTE. I do see  target.setvalueat class but I wanted the transformer to not be scheme base.  

Last answer 4 April 2017
0   0 0
0

comments

413

views

0

rating

Usually I recommend to set the global buffer (GB) as large as possible in order to maintain in memory more globals as possible. I don't know if this is a standard recommendation, but I want to discuss what should be the best buffer size for a Ensemble instance that only process messages. 

Last answer 3 April 2017 Last comment 5 April 2016
+ 1   0 4
1218

views

+ 1

rating

One of our Departments are claiming that we are loosing HL7 messages that are sent from their Vendor's system to Ensemble.

I know interfaces 101 if we have no record of the message then we never received it, however they are insisting they are sending it.

I asked them to provide the ACK's if they sent the messages but Ensemble had no corresponding Message Control ID (MSH.10) .

 

Currently I have the following settings...

Last answer 31 March 2017
0   0 4
0

comments

519

views

0

rating

Following on from https://community.intersystems.com/post/custom-business-process-change-sendrequestsync-sendrequestasync we are refactoring a number of business processes to use OnRequest/SendRequestAsync/OnResponse mechanisms.

To prevent overloading some of our datasources we currently implement a simple caching system using locks similar to the code below.

Last answer 31 March 2017
0   0 3
0

comments

230

views

0

rating

Hello,

 

I have a problem with an Ensemble instance on Windows to access to a network shared directory. Ensemble service (services.msc) is executed with a user which has access to this network shared directory :

 - When I try to copy or access files from a terminal ==> this is OK : the command w ##class(%SYS.ProcessQuery).%OpenId($Job).OSUserName returns the user defined in Ensemble service logon screen.

Last answer 29 March 2017 Last comment 30 March 2017
0   0 0
371

views

0

rating

I'm pretty new to Ensemble and Cache, and I ran into an error today that I haven't seen before: "ErrNoResponseClass: No Response Classname is assigned for Request class <<someNumber>>". I haven't found much documentation about this beyond the Ensemble Error Codes document, which is essentially just a duplicate of the information I can see in the error message when this problem occurs. Is there any further information about this error and the conditions that cause it? Or perhaps what the <<someNumber>> value represents?

Last answer 28 March 2017
0   0 3
0

comments

123

views

0

rating

GT1|1|1|Test^Test||123 Building^123 Building^Brooklyn^NY^11220^United States^^^Kings|^PRN^PH^^^^^^^^^(111) 111-1111~^PRN^CP^^^^^^^^^(222) 222-2222|||""|IN|DGH^Daughter

I'm trying to clear the phone number completely.

Remove target.{GT1(1):GuarantorPhNumHome()} still gives me _~_

Last answer 24 March 2017 Last comment 24 March 2017
0   0 1
168

views

0

rating

Goal:

  • Take an HL7 message, parse some data from it
  • Call a web service to get an authorization key, comes back as a simple string
  • Create a request object with data from the HL7 message and send it to the Web Service

The main web method call requires that key I received as a Soap Header element. All I can pass to the SOAP Operation business class is the request object with the data I plucked from the HL7 payload. Nothing in that particular request message has anything in it that tells anything to send the header, too.

Last answer 23 March 2017
0   0 0
0

comments

664

views

0

rating

I have a number of Business Process and due to the complexity these were created as "custom code" instead of BPL.

These processes currently invoke other components using SendRequestSync. For a couple of reasons I would like to be able to change these to use SendRequestAsync:

Last answer 22 March 2017 Last comment 23 March 2017
0   0 0
563

views

0

rating

I have an XML I am sending to an operation from a BPL.  This is a query for Patient information from Epic using a web service.  I created the operation using the add-in in Studio.  I setup the BPL to do a Call and send whatever data I receive from the client.  I get a response back from Epic with a list of matching Patients.  In the BPL I am trying to use the Response Builder to pass the response ID, name, DOB, etc. to matching context items to then pass to the client as a response.  I get the following error within the call:

Last answer 21 March 2017 Last comment 21 March 2017
0   0 0
573

views

0

rating

I have a Enslib.REST.operation which I want to use to send a JSON message. In Ensemble I am using the request message to the Business operation as an input for ObjectToJsonStream function so I can send it out (this is the way to go right?). However, I am now running into the fact that one of the attributes (template_name) contains an underscore and that I am not allowed to use the underscore to define the property in my ensemble RequestMessage:

Property template_name As %String;

Last answer 18 March 2017
+ 1   0 2
0

comments

156

views

+ 1

rating

I am relatively new to ensemble, but I am trying to build a REST operation using the enslib.Rest.Operation but I can't seem to get it to work at all. I am completely at loss here because the errors I am receiving are very unclear. I have tried a few different variants using PostURL and SendFormDataArray but I got errors on all variants. Suggestions are welcome.

Last answer 18 March 2017 Last comment 16 March 2017
0   0 3
465

views

0

rating

noob here..(moving from JCAPS to Ensemble)

We are wondering where is the best place to tie the schema category for an incoming HL7 message? Should we do this within the service (via the message schema category setting) or receive everything and validate in the process (DTL) level?

We want to capture everything that will be sent to that HL7 listener service and then decide what to do with bad messages at the process layer.

Does anyone have any recommendation regarding this? Appreciate your input and decision thought process.

Thank You,

 

Last answer 17 March 2017 Last comment 17 March 2017
0   0 0
152

views

0

rating

I am configuring a SOAP HL7 Receiver to handle HL7 Query messages.

I have set up a new class based on EnsLib.SOAP.Service and configured (correctly I hope) the parameters needed.  I have also amended the OnProcessInput Method skeleton provide to send messages on to the Business Process needed.

I am struggling to work out what is needed in the Web Methods and how to create them. 

Any help with this would be much appreciated especially examples that I can adapt for what I need.

Many thanks 

Last answer 16 March 2017
0   0 1
0

comments

159

views

0

rating

In this posting I want to raise the profile of a feature that arrived in 2009.1 but is perhaps not very well known.

It is sometimes useful to make certain packages, globals or routines available to all of your namespaces. Of course you can add the necessary mappings whenever you create a new namespace, but here's a simpler way.

Last comment 16 March 2017
+ 6   0 4
711

views

+ 6

rating

Post has been edited for clarification: Both HP Open VMS versions (for Itanium and for Alpha)  are discontinued for future InterSystems releases.
 
Future product releases, beginning with the next major release after 2017.1, will no longer be offered for the following platforms:
 
HP OpenVMS  for Itanium
HP OpenVMS  for Alpha
 
Products: Caché, Ensemble
 
Expected Availability: next major release after 2017.1
Last comment 10 March 2017
+ 3   0 3
698

views

+ 3

rating

Hi

I need to process a very large Batch file which contains HL7 charges which we pull using FTP. I need to loop through the file and do some checks and then split the large Batch file in to individual messages. These individual messages then gets process through a different module to create a output batch of different format

Last answer 3 March 2017
0   0 2
0

comments

293

views

0

rating

If your Ensemble environment is actually a HealthShare one, here's a snippet of information that I wasn't able to find in the documentation.

When a namespace is HealthShare-enabled it gets some mappings added to it in order to fetch stuff from the HSLIB database. The most obvious mapping is a package mapping that gives your namespace all the HS.* classes.

Last answer 2 March 2017 Last comment 2 March 2017
0   0 4
227

views

0

rating

I am having a problem getting pair key authentication to work on my local PC. I am using freeSShd as the SFTP server. I generated private and public keys using putty gen . I used these keys to successfully log into the root directory using both Winscp and Putty. But this is not working with an FTP Operation. Below is the error that results. freeSSHd server log shows that I log in but immediately disconnect.

I am working on HS2015.1.1 Please help !!

Last answer 27 February 2017
0   0 2
0

comments

497

views

0

rating