#Caché

Hi Team, Cahe system is not starting while starting one of our software application and getting an above error

Given the code below, I need help with getting the collected column widths from the Demo.Configuration table and stored in the columnWidths zne page property. As I understand it, I should be able to retrieve it using zenPage.columnWidths in the setColumnWidths or dgRender clientMethods but the alert is showing that it cannot be retrieved as it shows a value of Null. Once I can retrieve those values, then I want to set the widths of the colmns of the dynaGrid according to the values in the ^Demo.Configuration table. The data pulled in from the CSV file that creates ^Demo.

InterSystems FAQ rubric

If you want to raise an arbitrary custom error in a TRY block, you can pass an exception with a throw as follows. In the following example, a custom error is raised if Stcount is less than 1.

Class User.Test
{

ClassMethod ExceptionTest()
 {
    try
    {
      // : some codes
      if (Stcount<1) {
          throw ##class(%Exception.General).%New("User-defined error", "5001", "location", "Data at location error")
          // User-created errors are 5001 and above
      }
    }
    catch ex
    {
      write "Errors #", ex.Code, ": ", ex.Name, " : ", ex.

InterSystems FAQ rubric

Mirroring only synchronizes database files.

To synchronize other files required for your application (CSP files, images, documents, etc.) between the two servers that make up the mirror set follow one of the approaches:

1. Place those files on a shared disk by introducing a NAS or similar device
2. Or use file sync software to synchronize files between two servers.

Hello,

I am currently maintaining a legacy application that was developed in ObjectScript and accesses data by working directly with globals.
For a new program, however, I plan to access the same global data through SQL-mapped classes.

I have two questions regarding this approach:

1. If I define indexes in the SQL-mapped class, what potential impact (if any) could this have on the existing legacy application that directly accesses the globals?

Dear, Community!

I have a concern about using %Stream.TmpCharacter for storage purposes. Reading the class's source code, I can understand a bit about how it works. But I'd like to know from the community how it actually works. Is it necessary to use the .Clear() method to clear this buffer, or is it done automatically upon disposal?

Note: Please forgive my poor English.

SUB-AGENT auto stopping

I'm trying to catch some WorkQueue errors that are happening on 2019 but not on more recent versions.

I'm getting an error when trying to call a class method via a workQueue. It functions properly in 2024.1. When calling the method, it immediately errors. I have logging at the top of the method that never gets set. 

The error being returned by Iris is simply an "ERROR #5039: An error occurred while calling function  s %sc=##class(|"NS"|Path.To.Class).ClassMethod(.%p1,.%p2)"

The parameter counts match and are appropriate for the method.

Hello,

I'm trying to get the Reply Action Code to work with the error message text.

I have this ACK:

MSH|^~\&|APP|FACIL|||20250821143621||ACK|CUEACK_20250821143621|P|2.4
MSA|AE||Failed to queue message

This is some of the Action Codes I've tried:

• E*Failed to queue message=S
• E*Failed=S
• E*"Failed to queue message"=S
• :E*Failed to queue message=S
• :?E*Failed to queue message=S

It's not suspending the message however.

What am I doing wrong?

Thank you

Hello,

I have a main dispatcher (that extends %CSP.REST) that contains:
<Routes>
   <Map Prefix="/v([0-9]{1,2})/news"    Forward="API.Dispatch.news"/>
</Routes>

And I have the sub-dispatcher that contains:
<Routes>
   <Route Url="/:id"                        Method="GET"  Call="NewsGetItem"/>
</Routes>
If I try to access this route:
https://mydomain.com/mobile/api/v4/news/123
It doesn't work (404).
 

But strangely enough, it works (200):
https://mydomain.

In this case, a robot is nothing like Gort from the movie “The Day the Earth Stood Still” or any other humanoid robot from science fiction. Nor is this Robot the one-armed automated welder from a real-world automotive assembly line. This Robot is a program that controls another program. You might want this for automated testing or to capture application logic from an application for which you don’t have the source, and the application’s author lacked the kindness or foresight to provide an API for its capabilities.

Trying to create a new SQL Storage map on existing cache Global in the following format - ^MYGLO("R",rec)=data where the 'data' is built using $zel. e.g. $zel(data,1)="p1", $zel(data,2)="p2" etc... and the ^MYGLO("R",123)=data.

I'm having 2 issues.

Someone, please point me to the location of the cache ODBC drivers, as I only found IRIS ODBC drivers.

I am trying to use upload.csp as a template for choosing a CDV file to process. I am calling it from a zen page using this:
<button caption="Import Client Consultation Extract" 
       controlStyle="width:500px; height:100px; font-size:1.5em;"
         onclick="zenPage.importExtract();"/>

ClientMethod importExtract() [ Language = javascript ]
{
    // Open CSP popup to upload the CSV
    //alert('importExtract called.');
    zenPage.launchPopupWindow(zenLink('Upload.

In the Caché database, when calculating the total count based on the unique identifier of a record, the quantity is over 1.2 million. After removing duplicates based on the unique identifier and then calculating the total count, the quantity is over 400,000. When grouping by the unique identifier, it can be observed that the count for this identifier is not one. However, when performing a conditional query based on the identifier, only one record can be retrieved. Why is this the case?

Hi all,

I’m running into an issue with a %ZEN.Component.tablePane in a Zen page.

We have:

• A fully styled table with all columns defined
• A backend query (SearchMessages) that accepts multiple filter parameters
• A set of input fields at the top of the page for filtering (text, date, and checkboxes)

We’re trying to run the query from a button click using a client-side method (runSearch()) that collects the filter values, sets them as parameters, and calls executeQuery().

The problem is that the table does not update at all Old rows remain, or sometimes nothing appears.

For example, you start debugging the AAA function, which calls the BBB function, then goes to the CCC^ABC function in a different routine and ends up while executing XXX^XYZ. No other routines or functions are visited in this example. What I would like is to get the record of AAA -> BBB -> CCC^ABC -> XXX^XYZ. No marking each function with recording code should be involved: too time consuming, too many functions in real code.

UPD: Iris has built in %SYS.Trace for this purpose but this class is apparently absent in Cache 2017. Did not find any substitutes yet.

I have a personal copy of Cache which I use to help me with certain things. The instance resides on my Windows desktop. The apps I use a web enabled. It would be great if I could access my apps via web browser from my laptop without having to keep a copy of Cache on my laptop. It would make it difficult to keep the databases synced. So, if I restart my Cache instance, then I can use get to my apps by entering the url: http://ipadd:57772/csp/user/myapp.cls. but later, after having closed the browser on my laptop, if I try to open a browser session on my desktop I get license limit exceeded.

Hello Community,

I'm currently planning a system upgrade from Caché (2018.1.8.766) to InterSystems IRIS (2024.1). The environment consists of one database server and three application servers connected via ECP.

I’m considering two possible upgrade approaches:

1. Upgrade the application servers to IRIS first.
   Since IRIS is expected to be backward-compatible with Caché over ECP, the database server would remain on Caché temporarily.
2. Upgrade the database server first,
   followed by upgrading the application servers, as they don’t store data.

I am writing a little app where I press a button on a Zen form. It calls a ZenMethod that uses zenPage.launchPopupWindow() to provide me a way to choose a file. I then click on an upload button that calls a csp cache language script file that runs on the server, that grabs the contents of the file and stuffs it into a global. I want it then close and return to the parent window to continue processing the contents of the file.

If you are investigating complex structured Globals this can become
a rather boring typing exercise. Different from Global Explorer in
System Management Portal Global-Inspector allows a kind of drill-down
to dig deeper and deeper by subscript levels.
You also have the option to see the stored content or to show only
the subscript structures.
Globals storing SQL Tables are probably not so thrilling, but in SYSTEM
space you find real trees with completely different branches and twigs.

Global-Inspector can run in browser or from terminal command line.

Hi, 
I have a code that copy a method to another class for analysis purpose.

I also want this method to appear first in the source code to easily use it in VSCode with the classmethod debug button and not search it in the numerous method of the modified class.
Is there a way to do such a thing?
I tried the placeAfter keyword but I can't find a way to make it really work as I want. Is their other ways to control the order of methods?

Alex Koblov posted today a #CachéHaiku:

Full command names

Make your code more readable

Than compact versions

My haiku:

Caché Globals

Shows you keys to the value

If you $order it

Your variant? ;)

Hello to all the Cache Experts out there and Happy Friday!

The company I work for uses Cache 2017.1.3 and we have been seeing intermittent errors in the Cache Error Trap when an SQL query runs.   The error message looks like the error is occurring within the cached query routine that Cache auto-generates.  Unfortunately, when I pulled up the routine in the SMP System Explorer, I only found an obj version, so was unable to look at any code.

Here is the error:    Note:  the .

InterSystems FAQ rubric

You can check the free disk space at any time using the system utility class: SYS.Database and query: FreeSpace.

Here's how to try it in the IRIS terminal (go to the %SYS namespace and then run it):

zn "%SYS"
set stmt=##class(%SQL.Statement).%New()
set st=stmt.%PrepareClassQuery("SYS.Database","FreeSpace")
set rset=stmt.%Execute()
do rset.%Display()

The output result example is as follows:

*In the command execution example, all databases are located on the same disk, so the free disk space (DiskFreeSpace) returns the same value.

Are you curious about how to run Python scripts directly in your InterSystems IRIS or Caché terminal? 🤔 Good news it's easy! 😆 IRIS supports Embedded Python, allowing you to use Python interactively within its terminal environment. 

How to access the Python Shell?

To launch the Python shell from the IRIS terminal, simply run the following command:

do ##class(%SYS.Python).Shell()

This opens an interactive Python shell inside the IRIS terminal. From here, you can write and run Python code just as you would in a normal Python environment.

Working on wrapping an IRIS Cache ObjectScript method that runs for a few seconds. Trying to get UI updates to show BEFORE the method runs in an async/await function. But it seems to be running synchronously rather than asynchronously . So my question is does IRIS/ObjectScript CSP pages support futures with JavaScript or does it run all synchronously.

I'm following this guide as well as the sample.cs file and getting an error message on this line
cache_connection.Connect();

The error is:
Caught GlobalsException: lc_conn::connect_device returned Db_err: source: lc_conn::connect()  message: lc_conn::connect: CacheSecureStart returned -15: <ACCESSDENIED>

I've tried many variations of Namespace + Username + Password and they all result in that error, even though I can connect to the namespace just fine using other means. 

Until now i used $ZF(-1), in older Caché versión, now I try to use $ZF(-100),  i do:  

REST>w $ZV
Cache for Windows (x86-64) 2018.1.4 (Build 505_1) Thu May 28 2020 10:12:49 EDT
REST>s a=$zf(-100,"/SHELL","dir")
 
S a=$ZF(-100,"/SHELL","dir")
^
<NOTOPEN>

What is wrong?

Thanks in advance

I'm trying to print from Cache and I have setup the device, but keep getting a message that someone else is using it. this is RHEL 7.9. I have cups running and I can print from the command line.  I have also issued this command: lpadmin -p KM501L -u allow:all

what am I missing

thanks

Paul