Before I run down the "overengineered solution" path, I wanted to throw this out to the group.

We will be receiving HL7 messages via TCP/MLLP that have a PDF document stored in a single OBX segment. As the volume is expected to be somewhat high and the documents could be megabytes in size, it would be preferable to save the PDF payload to disk and replace it with a filesystem path before IRIS does it's first Save%. The idea being that we would than implement an OnDelete that would remove the file when the HL7 message is purged.

10
0 4 91

First of all thanks for your time and help reading this question:

We would need some help:

The use case is: to add a rule inside a EnsLib.HL7.MsgRouter.RoutingEngine, where we iterate in a EnsLib.HL7.Message to find a specified value inside all OBXs segments. It should return a Boolean

Is there any recommended way, or standard function inside Ensemble, that we could use, without having to develop a new function?

 

We have read:

10
0 5 105
Question
Matjaz Murko · Sep 29
Locking / unlocking

Hi.

What is the best/right way to unlock the object in ObjectScript after the lock was acquired by %OpenId class method? Setting the opened object to null (Set object="") doesn't release the lock.

Regards,

Matjaž

00
0 19 337

First of all thanks for your help and time

 

We would need to find inside PID:3 which one meets the following condition:

PID 3.4.1 = "CAC" and PID 3.5 = "JHN"

 

We have been investigating how could we do it

We have achieved to get single fields in a call request as follows:

request.GetValueAt("ORCgrp(1).ORC:OrderingProvider(1).IDNumber")

##class(Ens.Util.Time).ConvertDateTime(request.GetValueAt("PID:DateTimeofBirth"),"%Y%m%d","%Y-%m-%d")

 

00
0 0 18

We have the following code, but recently had a few issues with messages sent to downstream systems being rejected. 
After investigating, seems that the message being sent is being truncated, the RawContent that we are pulling from Ens.EnsLib_HL7.Message only has the first 10k of the message

We are storing message body IDs in a table, then when we receive later messages, we look up the corresponding record in the table, 
extract the message and alter some fields from the saved message based on the received message and send onto downstream systems

00
0 1 76

Once a week we are attempting to load an XML file from Workday into a MS SQL table using JDBC and Store Procedures. There is approx 102999 records in this XML file. We are struggling with processing the entire file within a reason amount of time. We feed the XML through a BPL to then populate values in a stored procedure then call the stored procedure through a Business Operation. I have tried splitting out the Business Operations to make two calls, but we still continue to see an issue loading the XML into MS SQL.

00
0 4 62

I added a Response Message Class to a call in the Business Process Designer.

When i click on Response Actions or on Response Builder i get a message

"You must specify a response message class in order to add or edit response actions."

no matter which response message i choose i always get the above warning.

how do i fix this?

 

Thanks

 

00
0 2 72

I need to execute multiple DELETE statements in a single query like this

DELETE FROM TableName WHERE ID = 2;
DELETE FROM TableName WHERE ID = 3;
DELETE FROM TableName WHERE ID = 4;

However It does not work when there're more than 2 statements and gives me an error

Expected FROM found WHERE^DELETE FROM TableName WHERE

Using IN is not an option.

00
0 6 106
Question
Markus Müller · Oct 25
Problem with sftp

Hello, everyone,

I have the problem that when trying to connect to the SFTP server the error appears, the user and password are wrong. However, these are correctly stored under login data and I entered! SFTP in SSL Config. The connection works wonderfully with Filezilla. Anyone else has a tip for me?

greeting

00
0 1 57

We receive a JSON message containing an element which is larger than the system long string size. We are using Ensemble HealthShare v2017 which prevents us from using the %GET method as it doesn’t allow us to define the output as a Stream. We are instead trying to the read the contents of the JSON message using Readline function, and store the value into an instance of the %Stream.GlobalCharachter class, and then read from the instance of that class and write the contents of that element into a HL7 Message.

00
0 2 57

I have created on class method which execute below command

From terminal : _System account works fine where code=0

From Studio : _System account give syntax error where code=1

set code = $zf(-1,"python C:\keys\GetToken.py")

w !, code

00
0 18 145

I use the following code to start a start a job :

Class MyClass Extends (...)
{
    ClassMethod Foo()
    {
       job $CLASSMETHOD("MyClass","MyMethod") //take forever depending hardware
    }

    ClassMethod MyMethod()
    {
       //do database related stuff
    }
}

On local environment, calling Foo() is instantaneous (a few ms). On production/test servers (which have much better hardware than local) calling this function is slow and take between 200 ms to 800 ms. Obviously starting a new job with "job" command take lot of time on those environments.

00
0 3 119

Getting following error when I start IRIS instance.    Would appreciate any suggestion to resolve server startup issue.  Thank you

Error when I try to start IRIS instance.

iris start <instance name>

Invalid ownership for ./irisdb

 

iris list response:

Configuration '*************'

directory:    /iris/sys

versionid:    2021.1.0.215.0

datadir:      /iris/sys

conf file:    iris.cpf  (SuperServer port = 51773, WebServer = 52773)

00
0 2 43

Does anyone know of a relatively quick and straightforward way of converting code written in the old dot scoping syntax with argumentless do (see here for reference: https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KEY=RCOS_cdo_legacy) to the modern parentheses scoping syntax? It's not too bad to do it by hand, but it's also easy to make a mistake and leave a "quit" in an if statement by accident for example.

E.g.

00
0 2 119

Hi all, 

I'm fairly new to this engine so I was wondering what the best approach for creating a dynamic mapper to downgrade from one HL7 version to another (e.g 2.4 to 2.3) with the DTL Editor,  It seems like something that would be quite commonly needed but I haven't found a method that works yet,

00
0 0 40

Is there an ObjectScript analog of Find with Match Element Type option? I know there is an  ObjectScript analog of Find in Files, Studio.Project.FindInFiles and Studio.Project.FindInProject, but I failed to locate so far an analog of Edit/Find. I am specifically interested in Match Element Type option so I could search across selected files for globals. Somehow Studio.Project.FindInFiles does not offer this option natively.

00
0 2 86

Hello - basic question.  Looking for sample code to parse inbound ACK messages.  Messages are coming in a SOAP envelope.  The ACKs will have MSH/MSA/ERR segments (other segments for QBP messages down the road).   Looking at common, established way(s) to parse the messages HS would be a great help to get started on this.  Thanks in advance.

00
0 1 53
Question
Rochdi Badis · Oct 14
Lock the Modal View

Hi Guys,

I'm using a Modal Group but whenever I click outside it the Modal gets minimised, so How can I change the view so that whenever pops up the view get locked until I'm finished with my modal then click exit to endModal ?

 

thanks

 

00
0 0 35

I have a website where I offer shipping services. I need to implement UPS API in my website. I already did all the basic tasks such as create my UPS developer account, download the packages... Now I want to start with the project but I don't have no idea about how to start. UPS doesn't give any instruction or example about that.

P.S: I have knowledge in the basic language such as HTML, JavaScript, PHP, CSS and MySQL...

Please can someone help me with that?

00
0 2 38