First of all, thanks for your help, and time reading this question.

Why, when we send a SOAP message from SoapUI to a SOAP service in a HealthShare environment called 'ESBCHUIMI,' it recognizes the 'Credenciales' header, which has 'usuario' and 'password' as properties. This class is a %SOAP.Header.

However, when we load the WSDL using the SOAP wizard from this SOAP Service to another HealthShare environment called ESBSSCC and send it from SoapUI to ESBSSCC, when it is being forwarded from ESBSSCC to ESBCHUIMI, the ESBCHUIMI's service outputs:

0 5
0 67

Hello,

First of all thanks for your time reading this doubt.

We have discovered the following behaviour. Inside a Router we have a roule which needs to filter out the ADT_A08 messages which have not OBXs.

The legacy system had this rule implemented:

(((Document.{OBX(1).SetIDOBX}<"1")||((Document.{EVN:EventReasonCode}!="COD")&&(Document.{EVN:EventReasonCode}!="FIN")))

However we have tested it and it does not filter out the ADT_A08 messages.

0 5
0 116

Good morning,

Thank you for taking the time to read, understand, and answer this question.

If you needed to convert a message where questions are separated by "|", and the question text is the portion before the ":" and the response is the portion after the ":"; Which way would be the most readable and understandable for other developers?

Input example:

NAME OF SQUAD 1?:ALPHA|NAME OF SQUAD 2?:BRAVO|NAME OF SQUAD 2?:ANSWER THREE||NAME OF SQUAD 25?:YANKEE|NAME OF SQUAD 26?:ZULU

Output structure:

0 2
0 89

I have a %GlobalBinaryStream object that I'm trying to save as a local file after being received through a SOAP Web Service.

To do this, I created a %Stream.FileBinary object and wanted to set where the stream copied to this object would be saved by using either the DefaultStreamDir() ClassMethod or the NewFileName() ClassMethod. However, the documentation isn't very helpful on how to use these ClassMethods.

Right now, I have the below code:

1 4
0 188

Hello, good morning

First thank you for your time in reading and answering our question.

We have been reading, inquiring, researching about how to make multiple dispatches from 1 Process of type "DICOM.BP.QueryProcess" to several target Operations.

We need some help to further develop this use case, and some advice 🧭, examples or recommendations

0 1
0 198

Good morning,

We would appreciate your support:

Developing an integration to perform a "Query / Retrieve" circuit with DICOM medical imaging studies, we would need the following:

Options of invocation of the DICOM TCP service that has been published for this integration, alternatives to the command line option.

Specifically we have read: Receive DICOM document with an embedded PDF and metadata.

0 3
0 233

First of all thanks for your help and time

We would need to find inside PID:3 which one meets the following condition:

PID 3.4.1 = "CAC" and PID 3.5 = "JHN"

We have been investigating how could we do it

We have achieved to get single fields in a call request as follows:

request.GetValueAt("ORCgrp(1).ORC:OrderingProvider(1).IDNumber")

##class(Ens.Util.Time).ConvertDateTime(request.GetValueAt("PID:DateTimeofBirth"),"%Y%m%d","%Y-%m-%d")

1 2
0 338

Hello,

I'm experiencing a recurrent problem that I haven't found the way to solve, so I'm coming here with the hope somebody can give me a new approach.

To make it short: we are creating categories on-demand to be able to place the maximum numbers of workers in memory, avoiding the limits established by system categories. But from time to time, one of this creation fails and system is no able to start the queue. The error we are getting is:

0 1
0 204

Hey everyone as you may know I am a beginner and I am kindly asking for some assistance in a problem I have been solving. The problem is that I am calling a user defined function within a procedure called occupiedseatsAdj and the compiler comes up with this error.

0 2
0 158
Question
· Aug 5, 2021
Convert hexadecimal to base64

Hello, first of all thanks for your time reading our question 💭

We would need to be able to transform a hexadecimal string to a base64 coded one. 🔄

To be specific, our use case is this:

1º We have our hexadecimal as follows:

4C5803040101020179C3913EC3BA7C4C580708010101021824584D4C

2º We convert it to ASCII:

LXyÑ>ú|LX$XML

using this online tool:

0 5
0 1.3K
Question
· Jul 27, 2021
How To Pass Custom Class

I've created a custom class that extends to the standard HS.Message.PatientSearchRequest. Inside the custom class i just want to pass the data as input only.

But i am getting ERROR #6277: Type attribute, s01:AcoPatientSearchRequest, does not specify valid type for XML input tag: pRequest (ending at line 5 character 171)
</error>

I tried adding Parameter XMLIGNOREINVALIDTAG = 1; and

0 8
0 452

Hi all, I am new to IS Objectscript and I would appreciate some assistance regarding this.

I am trying to find out how to count the number of elements within a dynamic abstract object and I am having some trouble using the size method.

Here is the code below:

The key value pairs are originally in JSON and I would have converted it in to an object for use.

0 7
0 279

Hello,

First of all thank you for your time reading our topic

We would need some help from experienced people

We have a SOAP Service with more than 10 methods

Our aim is to include all classes being used by this SOAP Service, in a Studio project

The challenge is that there are plenty Data classes (which extends from (%SerialObject, %XML.Adaptor))

▶️ Is there a recommended way to include all project's classes in a Studio project?

0 1
0 145

Hello everyone,

I have a question, I am trying to use xecute command, but something wrong happen when i was using the command, and i don't know why hahahaha.

I created a file .mac with this code:

label(test) public{
       set routine="variable"
       set call="write routine,!"
       xecute call
       quit
}

But when i run the command, show me this message error:

<UNDEFINED>label+3^tstFJR3 *routine

After that i changed the code to:

0 4
0 195

I have a requirement to update the Ensemble Host Settings Programmatically. Mainly the "AlertOnError,QueueCountAlert,QueueWaitAlert,InactivityTimeout" settings.

I used Ens_Config.Item (persistent) class to get the settings (list object) and then update it. But for some of the Business Host's, I dont see the above settings in the table, but present in Settings of that particular Host in Ensemble Management Portal. So my logic is not working.

1 11
0 453