I would like to understand the mechanism of "How data is written to the IRIS Database and in what sequence data is written to Journal, WIJ and IRIS database"

I created a new repo called ipm-module-budget from https://github.com/intersystems-community/intersystems-iris-dev-template template.

I cloned the repo to an EC2 instance in AWS. When I try to build image, I see this error:

#8 22.09 [IRISAPP|ipm-module-budget] Reload START (/home/irisowner/dev/)Segmentation fault (core dumped) #8 ERROR: process "/bin/sh -c pip3 install -r requirements.txt && iris start IRIS && \tiris session IRIS < iris.scri pt && iris stop IRIS quietly" did not complete successfully: exit code: 139

READY 2026 is almost here and some people are still deciding whether to go 👀

Imagine a colleague asks you: “Why should I attend READY this year?”

You only get one sentence to convince them.
💙 Read other responses and like the ones that stand out to you. The comment with the most likes will receive 500 bonus points on Global Masters.

Drop your best argument below 👇

Let’s see who can make READY 2026 impossible to resist.

I have an issue and can't seem to find the problem.

Issue

 In some namespaces i get a 403 Page not Found error for healthconnect/csp/healthshare/[NAMESPACE]/%25ZEN.Dialog.namespaceSelect.cls ; healthconnect/csp/healthshare/[NAMESPACE]/%25ZEN.Dialog.finderDialog.zen  && healthconnect/csp/healthshare/[NAMESPACE]/_CSP.UI.Portal.About.zen

Iris setup

It is currently configured in a mirror group and on the other mirror-member i don't encounter the issue. (I have checked if it was because of the member-type Primary and Backup).

Hello all,

I have a EnsLib.HTTP.GenericMessage inbound from a webhook with a GC stream.

My router is defined as the following:

There are lessons we learned from developing and maintaining code for interoperability components within a healthcare institutional environment.

The plane is already flying

Be prepared to rebuild, improve, extend, and fix the plane mid-flight.
 

Maintenance windows for hospital systems are often very limited, with some required to be operational 24/7. While the health critical systems such as imagery modalities or registration kiosks — or at least their critical functions — must operate autonomously, efficiency and usability may be compromised when interoperability components malfunction.

Hey Developers,

Thank you for being part of the InterSystems Developer Ecosystem! 
We truly appreciate your participation across the Developer Community, Open Exchange, Global Masters, and the Ideas Portal.

Each year we run a short survey to understand how we can improve our platforms and better support developers like you. Your feedback helps us shape the future of the ecosystem.

Please take a few minutes to complete the survey:
👉 InterSystems Developer Ecosystem Annual Survey 2026 (3-5 min, 12 questions)

Note: The survey takes less than 10 minutes to complete.

Hi all.

I have a rather strange problem.

I've created a method in Python to create a vector for a vector search. So far, so good.

If I call this method from the terminal, it works correctly:

But if I make this same call from a code block in a Business Process, it gets stuck, doesn't respond, and throws the following error:

Does anyone know what's happening and how to fix it?

Thank you in advance

Hi community,

I've been working on a side project that I'd love to get some eyes on: a ground-up rebuild of the classic IRIS Production Monitor using a modern web stack. The existing ZEN/CSP-based portal does the job, but I wanted to explore what a contemporary, real-time version of it could look like.

What it is

A standalone Angular web application that connects to any Interoperability-enabled IRIS namespace and gives you a live view of your production — services, processes, operations, queues, event log, and message traffic — all in one screen.

As part of the new Interoperability UI wave (see what was new in 2025.1, and 2025.3 by @Aya Heshmat), v2026.1 which is available already as a Developer Preview, and this could be a reason for you to give it a ride - will be shipping the new UI for the Message viewing and searching, including Visual Trace (and other UI goodies).

He's a quick teaser:

As part of the new Interoperability UI wave (see what was new in 2025.1, and 2025.3 by @Aya Heshmat), v2026.1 which is available already as a Developer Preview, and this could be a reason for you to give it a ride - will be shipping the new UI for the BPL editor (and other UI goodies).

He's a quick teaser:

I may have mentioned this before: I believe the Visual Traces, these sequence diagrams with full content of each step, are a fantastic feature of the IRIS Data platform! Detailed information about how the API works internally, as a visual trace, can be very useful for projects on the IRIS platform. Of course, this applies when we are not developing a high-load solution, in which case we simply don't have time for saving/reading messages. For all other cases, welcome to this tutorial!

If you have ever dug through a large IRIS namespace looking for where a particular string, method call, or pattern was used, you know the pain: there was no built-in way to do a grep-style search across your server-side ObjectScript code from VS Code — at least not without jumping through some hoops.

That is what ObjectScript Search fixes.

Try it today with a simple install from the VS Code Marketplace. If you don't like it, uninstalling is just as easy. But I think you will like it — it is a huge quality-of-life improvement for anyone doing ObjectScript development in VS Code.

Hi Community!

We’re building a series of short, hands-on Instruqt tutorials to help newcomers get up to speed with InterSystems technologies faster and more effectively. To kick things off, we’ve just released a new tutorial, “Data Models of InterSystems IRIS,” covering the fundamentals of the IRIS multimodel approach. This is exactly the type of focused, concise, practical learning experience we want to expand. And this is where you come in!

We’d love to hear your ideas for other tutorial topics to help developers new to InterSystems IRIS take their first steps with confidence. Please welcome the new sweepstakes:

💡 Topics for hands-on Instruqt Tutorials 💡

Already included in SystemPerformance

There are nfs disk commands (including nfsiostat) included with SystemPerformance, but disabled by default. Enable them by running:

$$Enablenfs^SystemPerformance()

Doing so will add the following nfs commands, for example, on Linux:

1. /usr/sbin/nfsstat -cn
2. /usr/sbin/nfsiostat [interval] [count]

Ensure the commands are installed and runnable from the OS :)

This can be subsequently disabled via $$Disablenfs^SystemPerformance()

Adding a generic command to SystemPerformance

Adding an arbitrary OS tool creates a "user" command under ^IRIS.

Please, provide Code example to build a %Library.DynamicObject or a %Library.DynamicArray from Resultset followed by converting to JSON

The InterSystems Ready 2026 Conference  is approaching fast — it's a great time to prepare and check your knowledge before attempting one of the Certification exams onsite .

InterSystems certifications aren't easy: you need to practice with questions aligned to the real exam objectives.

exam-prep.es is a free platform built for exactly that: practice, identify weak spots, and show up better prepared.

Hi, Community!

🤔Did you know that InterSystems has a full catalog free online learning resources to help you get up to speed with our products and features?

🎓 Check out this quick introduction, then head over to the online learning site to explore resources like interactive exercises, learning paths, and online courses!

Welcome to InterSystems Online Learning 

Hi Community!

Welcome to Issue #27 of the InterSystems Ideas newsletter! Let's look at the latest news from the Ideas Portal, such as:

✓ General Statistics
✓ New sweepstakes!
✓ Recently implemented ideas by InterSystems

We are trying to track down significant growth within our Namespaces, one big culprit is Ens.AppData (EnsLib.SQL.Snapshot). 

Within many of our BPL's we use EnsLib.SQL.Snapshot to return Results from External SQL Stored Procedures or Query's. The same EnsLib.SQL.Snapshot context variable is used for many of these calls within a BPL. 

Is there something we should be doing at the end of the BPL to ensure that EnsLib.SQL.Snapshot gets cleaned up and purged from Ens.AppData?

Hello everyone, thanks for reading this question.

I am currently working with Ens.Alerting.ManagedAlert in an interoperability production and I am using the alert suppression mechanism to avoid generating duplicate alerts within a defined time window (for example, 30 minutes).

The configuration works correctly in terms of preventing duplicate alerts from being generated, but I have a question regarding observability.

When an alert is suppressed during the configured time window, I can see log messages such as:

        "Managed alert not created for AlertRequest with ID 'XXXX' due to rule 'Rules.

How can I create a Task that tells a Ens.BusinessService to execute its SQL query using the EnsLib.SQL.InboundAdapter?

So far I have come up with

Class OSU.Workday.TerminationsTask Extends %SYS.Task.Definition
{

Parameter TaskName As STRING = "OSU - Workday Termination Update";

Method OnTask() As %Status
{
    try{
        // Call BusinessService
        set tSC = ##class(Ens.Director).CreateBusinessService("OSU.DataSource.Workday.TermService",.tService)

        if $IsObject(tService){
            set inputMessage = ##class(Ens.StringContainer).