I am currently studying for the HealthShare Health Connect HL7® Interface Specialist exam. Does anyone have any tips? 

Thank you!

This month, try a new learning path to see how you can use InterSystems IRIS® data platform as the back end of your application. You can also listen to the latest podcast episode on accessibility, explore new product home pages in the documentation, and take a classroom course. Find all the details—and other learning resources—in the May 2022 newsletter.

Hi all

I'm working in Zen - how might I get the name of the currently logged in user?

Andy

Hi Guys,

I'm running Ensemble 2014 and I'm using this to convert JSON to object:

class(%ZEN.Auxiliary.jsonProvider).%ConvertJSONToObject

 but how can I convert to %CharacterStream because I'm saving a %CharacterStream field

Thanks

Hey Community,

Check out the latest video on  InterSystems Developers YouTube channel:

⏯ Drinking Our Own Champagne: InterSystems AppServices' Move from Zen Reports to InterSystems Reports

Hi everyone, 

I am currently performing a patient merge thorug ADT^40 HL7 messages. In order to do that, I am following this guide which I found on the ducumentation: http://10.41.11.210:57772/csp/docbook/DocBook.UI.Page.cls?KEY=HESUP_ch_IHE#HESUP_IHE_configuring_registry_PIX
My main issue regards the fact that I can't update the PatientID and the SourcePatientID of the HS_Registry.Document table of the prior patient, wheras, I find only the new anagraphic on the HS_Registry.Patient table.

Colleagues, hello!

In this article, I will tell you how we reduced the report generation time from 28 minutes to 1 minute. Let me tell you how we achieved this.

I hope that if necessary you will be able to reproduce the same results for yourself. Useful links will be inside this post, so read to the end.

Let's start.

Report

We are reporting for a company using Adaptive Analytics and InterSystems Reports Server. Previously, this report was generated in the form of screenshots from DeepSee. In general, it was not bad, but it took a lot of time and did not look very readable.

We need to send some coordinates to a spaceship through a laser beam. To do that we have to encode it, and beam it out into space. Your mission is to implement the encoder with a compression standard. As usual shortest solution wins.

Task

You will receive a string of comma-separated integers and you will return a new string of comma-separated integers and sequence descriptors.

Hey Community,

Meet the new video on InterSystems Developers YouTube channel:

⏯ InterSystems IRIS FHIR Server

Do you have cases using datadog to monitor intersystems products?

So it appears that this feature is still missing in 2022.1 (https://docs.intersystems.com/iris20221/csp/docbook/DocBook.UI.Page.cls…).

Does anyone have any thoughts or ideas on how to create Namespace Package Mappings on deployment in a 'neat' way during automated deployment?

  I really like the ability to use merge cpf on deployment of our servers, but this one missing action is kind of holding me back.  Appreciate if anyone else has encountered this and how they approached it.

Cheers.

This package offers a utility to export an XLarge Global into a JSON object file and to show
or import it again. In a previous example, this all was processed in memory. But if this is a
large Global you may either experience <MAXSTRING> or an <STORE>  error
if the generated JSON structure exceeds available memory.
 

Academic refers to the structure created.

Continuing on the journey of implementing %UnitTest, @Timothy Leavitt's Test Coverage package, and automated testing with Jenkins.

My question today: why do we utilize a unit test root directory?  

I've been defining packages and classes to write unit tests as I've been developing and I run the tests on the command line or using a routine file that is setup as a debug target which has been working great.  I use DebugRunTestCase() to do this (so the classes aren't deleted).

Prospects, Customers, and Employees can now download IRIS and IRIS for Health both Community and Enterprise editions on https://evaluation.intersystems.com 

This will allow for new features not yet released to be tested by prospective customers and current customers to sample the latest and greatest that is in the works.

Hi All,

Can you please guide me on how to programmatically write objectscript task to export audit log to a directory and what type of task should I set it to.

I want to achieve the same behaviour on the code as seen below 

Hi

I have a few Zen pages, one of which is implementation of  %CSP.StreamServer which I'm using to download a PDF file, however, any file downloaded is 5Kb smaller than the original. This is the code I'm using:

Class GMECC.DocmanConnect.Pages.downloadGPNotOnHub Extends (%ZEN.Component.page, %CSP.StreamServer)
{
    ClassMethod GetId()
    {
        Quit $Get(%request.Data("filepath",1))
    }

    ClassMethod OnPreHTTP() As %Boolean
    {
        set filepath = %request.Get("filepath")
        
        set tFs=##class(%Stream.FileCharacter).%New()
        set tFs.

1. Fhir-client-python

This is a simple fhir client in python to practice with fhir resources and CRUD requests to a fhir server.
Note that for the most part auto-completion is activated, that's the main reason to use fhir.resources.

GitHub

• 1. Fhir-client-python
• 2. Prerequisites
• 3. Installation
  • 3.1. Installation for development
  • 3.2. Management Portal and VSCode
  • 3.3. Having the folder open inside the container
• 4. FHIR server
• 5. Walkthrough
  • 5.1. Part 1
  • 5.2. Part 2
  • 5.3. Part 3
  • 5.4. Part 4
  • 5.5. Conclusion of the walkthrough
• 6. How it works
  • 6.1. The imports
  • 6.2. Creation of the client
  • 6.3.

Hi Guys,

How do I create a JSON with the below structure pls:

{
  "field 1": "123",
  "field 2": "1.1.1",
  "field 3": "4.428",
   "Lines": [
    [ 0.00523, 0.00952, 0.01626 ],
    [ -0.00303, -0.00286, 0.00387 ],
    [ 0.00110, 0.00814, 0.00800 ],
    [ -0.00991, 0.00952, 0.00800 ]
  ]
}

thanks

In various tests I used both and found no real reason to prefer the one or the other.
Eventually I missed some limits. At least I didn't hit any.
What is the general opinion?
Where to use the one or the other?

Hello Team,

Need help on HL7 message processing without use of Ensemble. Any sample code on how inbound HL7 messages  using TCP/IP streaming mode can be processed through COS?

I ran into an interesting ObjectScript use case today with a general solution that I wanted to share.

Use case:

I have a JSON array (specifically, in my case, an array of issues from Jira) that I want to aggregate over a few fields - say, category, priority, and issue type. I then want to flatten the aggregates into a simple list with the total for each of the groups.

The Data Platforms team is very pleased to announce the 2021.2 release of InterSystems IRIS Data Platform, InterSystems IRIS for Health and HealthShare Health Connect, which are now Generally Available (GA) to our customers and partners.

Release Highlights

InterSystems IRIS Data Platform 2021.2 makes it even easier to develop, deploy and manage augmented applications and business processes that bridge data and application silos.

Hey Developers,

In the second part, you will learn how to build a FHIR Application with OAuth 2.0 and OKTA:

⏯ Securing FHIR Applications with OAuth 2.0 (Part 2)

The InterSystems Iris Fhirserver running on a Raspberry Pi Raspberry running as a FHIRserver

Raspberry running as FHIRserver

About a year ago I wrote some articles about the installation of the HAPI FHIRserver on a   Raspberry Pi. At that time, I only knew the basics of the FHIR standard, little about the technology behind FHIR-servers and not much more about the Raspberry. By trying, failing, giving up and trying again I learned a lot.

Hi Guys,

is there a sample code where I can  basically send a HTTP request given a URL and authentication and handle the JSON response?

Thanks

Support is helping you troubleshoot a report. They want to reproduce a problem in their local system. Too bad they can't run your report, because the JDBC data source connection will fail. Or... is there a way?  

Hi guys,

How do I create a make a http request using curl, I've found samples on how to do it from a command prompt but how to create and make a http post request and get a response with ensemble object and functions?

I guess somthing like :

s req=##class(%Net.httpRequest).%New()

...etc

Or do I build a command run it in ensemble and get a response back, if so how can I do that ?

Thanks

Hi Guys,

I currently have a service that uses an InboundAdapter to get a JSON file and process it given that the client is pushing data to us, but now we have another client where we need to request the JSON file by sending a HTTP request then get the file and process it, kind of a Get rather than push, how can I create a service that handle that?

Thanks

The doc name is formatted lname,fname. How do I replace the comma with a ^ so I get lname^fname.

Hi Guys,

we have a class with over 24 million records and despite indexes querying is still slow, so we are looking to create a copy or clone of our current class have an scheduled task that runs every night or month, copy old records this new clone (eg. from last month)   and remove old them from our current class.