Question
Gevorg Arutiunian · Apr 22, 2020
FTP adapter

Hi community,

I am now working with an ftp adapter. I have no problem connecting to the FTP server, but there are problems with interacting with files. Has anyone had any experience with an FTP adapter, such as getting/modifying/deleting files?

 

10
0 4 225

Now the Classes/Rutines/DeepSee files will be automatically exported to the working directory after saving or compiling and files will be automatically deleted .

Installation

To install isc-dev , you just need to download and import the file isc-dev.xml from last release.
Some ways to import isc-dev .xml file:

  • Go to Management Portal -> System Explorer -> Classes -> Import and select the XML file.
  • Drag the file over Studio.
  • Terminal command:
NS>do $system.OBJ.Load("yourpath/isc-dev.xml","ck")
NS>zpm
zpm: NS>install isc-dev

How to enable this feature:

  • After importing the class in the target namespace, run the following method to set up the working directory:
NS>do ##class(dev.code).workdir("/path/to/your/working/directory/src/")
  • Go to Management Portal -> System Administration -> Configuration -> Additional Settings -> Source Control.
  • Select the target namespace and set the dev.FileManExtension class as the main one and save it.
  • Try to create a new class in the studio and save/compile it
  • Enjoy!
20
1 1 154

Here is an ObjectScript snippet which lets to create database, namespace and a web application for InterSystems IRIS:

    set currentNS = $namespace

    zn "%SYS"

    write "Create DB ...",!
    set dbName="testDB"
    set dbProperties("Directory") = "/InterSystems/IRIS/mgr/testDB"
    set status=##Class(Config.Databases).Create(dbName,.dbProperties)
    write:'status $system.Status.DisplayError(status)
    write "DB """_dbName_""" was created!",!!


    write "Create namespace ...",!
    set nsName="testNS"
    //DB for globals
    set nsProperties("Globals") = dbName
    //DB for routines
    set nsProperties("Routines") = dbName
    set status=##Class(Config.Namespaces).Create(nsName,.nsProperties)
    write:'status $system.Status.DisplayError(status)
    write "Namespace """_nsName_""" was created!",!!


    write "Create web application ...",!
    set webName = "/csp/testApplication"
    set webProperties("NameSpace") = nsName
    set webProperties("Enabled") = $$$YES
    set webProperties("IsNameSpaceDefault") = $$$YES
    set webProperties("CSPZENEnabled") = $$$YES
    set webProperties("DeepSeeEnabled") = $$$YES
    set webProperties("AutheEnabled") = $$$AutheCache
    set status = ##class(Security.Applications).Create(webName, .webProperties)
    write:'status $system.Status.DisplayError(status)
    write "Web application """webName""" was created!",!

    zn currentNS

40
4 3 549

This code snippet sends an XML request to a server and saves the response to a file. The class method "test" runs the code:


Class objectscript.postXML
{
    classmethod test() {
        Set HTTPRequest = ##class(%Net.HttpRequest).%New()
        Set HTTPRequest.ContentType = "text/xml"
        Set HTTPRequest.NoDefaultContentCharset = 1
        Set HTTPRequest.Location = "ITOMCZ"
        Set HTTPRequest.Server = "wph.foactive.com"
        Do HTTPRequest.RemoveHeader("User-Agent")  
        Do HTTPRequest.RemoveHeader("Accept-Encoding") 
        Do HTTPRequest.RemoveHeader("Connection")
        Do HTTPRequest.SetHeader("Expect","100-continue")
     
        Set RequestXML = ##class(%Library.File).%New("c:\test.xml")
        Do RequestXML.Open("RS")
        Do HTTPRequest.EntityBody.CopyFrom(RequestXML)
        Do RequestXML.%Close()
     
        Do HTTPRequest.Post(HTTPRequest.Location)
     
        Do $System.OBJ.Dump(HTTPRequest)
        Do $System.OBJ.Dump(HTTPRequest.HttpResponse)
     
        Write HTTPRequest.HttpResponse.Data.Size
        Write HTTPRequest.ContentLength
     
        Set ResponseStream = ##class(%Stream.FileBinary).%New()
        // Second part is typically the file extension, i.e.: application/pdf -> pdf
        Set FileType = $Piece(HTTPRequest.HttpResponse.GetHeader("CONTENT-TYPE"),"/",2)
        Set ResponseStream.Filename = "C:\test."_FileType
     
        Write ResponseStream.CopyFrom(HTTPRequest.HttpResponse.Data)
     
        Write ResponseStream.%Save()
        Do ResponseStream.%Close()
    }
}

Here's a link to the code on GitHub

00
0 0 352
Article
Gevorg Arutiunian · Dec 27, 2018 2m read
Use %XML.Node to walk a DOM

The following code walks a DOM using %XML.Node. It also prevents %XML.Writer to change whitespace. Run the code using the class method "test":


Class objectscript.walkDOM Extends %Persistent
{
    ClassMethod dfs(node As %XML.Node)
    {
        s entrynode=node.NodeId
        do {
        //element nodes with one whitespacetyped child are the ones we want to change
        if (node.NodeType=$$$xmlELEMENTNODE){
            s snode=node.NodeId     
            if (node.MoveToFirstChild())            
                {
                    i ('node.MoveToNextSibling()){
                        i (node.NodeType=$$$xmlWHITESPACENODE){
                            s node.NodeType=$$$xmlTEXTNODE
                            s node.NodeId=snode
                        }
                    }
            }
            s node.NodeId=snode     
        }   
        if (node.HasChildNodes()){
            d node.MoveToFirstChild()
            d ..dfs(node)
        }
        } while (node.NodeType'="" && node.MoveToNextSibling())
        s node.NodeId=entrynode
         
    }
     
    ClassMethod test()
    {
      set xml = "abcdefg"
     
      s reader=##class(%XML.Reader).%New()
      do reader.OpenString(xml)  
      set writer = ##class(%XML.Writer).%New()
      //do some magic
      d ..dfs(reader.Document)
       
      w !,"with indent=1:",!
      set writer.Indent = 1
      do writer.OutputToString()
      do writer.Document(reader.Document)
      w writer.GetXMLString()
      set writer.Indent = 0
      w !,"with indent=0:",!
      do writer.OutputToString()
      do writer.Document(reader.Document)
      w writer.GetXMLString()
    }
}

Here's a link to the code on GitHub: https://github.com/intersystems-community/code-snippets/blob/master/src/...

00
0 0 156

(Originally posted by @Ben Spead on June 25, 2014)

This code snippet generates a list of Ensemble Lookup Tables and Schema documents in the user's current namespace. Run the code by running the class method "test":


Class benspead.EnsTablesSchema
{
    classmethod test() {
        If ##class(%Dictionary.CompiledClass).%ExistsId("Ens.Util.LookupTableDocument") {
            // only supported in Ensemble 2012.1+
            Write !,!,"Exporting Ensemble Lookup Tables..."
            Set sc = $$$OK
            Set rs = ##class(%ResultSet).%New("Ens.Util.LookupTableDocument:List")
            Do rs.Execute()
            While rs.Next() {
                Set item=rs.Data("name")
                Write "document found: "_ item,!
            }
            Do rs.Close()
            Set rs=""
        }
        If ##class(%Dictionary.CompiledClass).%ExistsId("EnsLib.HL7.SchemaDocument") {
            Write !,!,"Exporting Ensemble HL7 Schemas..."
            Set sc = $$$OK
            Set rs = ##class(%ResultSet).%New("EnsLib.HL7.SchemaDocument:List")
            Do rs.Execute()
            While rs.Next() {
                Set item=rs.Data("name")
                Continue:$listfind($lb("2.1.HL7","2.2.HL7","2.3.HL7","2.4.HL7","2.5.HL7","2.6.HL7","2.7.HL7","2.3.1.HL7","2.5.1.HL7","2.7.1.HL7","ITK.HL7")
                                    ,item)
                Write "document found: "_ item,!
            }
            Do rs.Close()
            Set rs=""
        }
    }
}

Here's a link to the code on GitHub: https://github.com/intersystems-community/code-snippets/blob/master/src/...

00
0 3 444