New post

Good morning,

First of all we would like to thank you for your time reading, thinking and aswering this question.

We have been developing a Transformation to convert a source ORU_R01 to a target ORU_R01. For each OBX segment we need to check an if, and then, if it is true we just need to put this OBX and continue to the next iteration, otherwise, if it is false, we need to put (copy) the ORC + OBR + TQ1 before this OBX, and then put this OBX, and after that, the SPM.

0 4
0 187

Hello,
First of all thanks for your help.

We have developed a REST Operation. We wonder how could we face that String do have a character limit.

We just need to convert httpRequest.HttpResponse , which is a stream , because $isobject(response.Data) returns 1; which has a JSON inside it, and we need to convert it to a Ens.Response.

This response is structured as same as the JSON's properties:

0 3
0 215

Hello,

First of all, thanks for your help, and time, reading this questions, and answering to this doubt.

We have the following use case: to convert a HL7 ER7 ORU_R01 v2.5 message, to a Ens.Request Message which represent it with a custom data structure (each segment is a group of Properties).

To be more precise, the target Ens.Request Message's structure looks like:

0 5
0 343

Hello,

First of all; thanks for your time reading this post, and thanks for your answers and help. I am really grateful.

We have the following need: Send a DICOM Find Document to get the complete list of a patient's studies from an Outbound System, which we simulate with the tool called "dcm4che" specifically with these two commands:

1º.Initialize a DICOM database in simulator. We will use this database to run queries using DICOM C-FIND commands:

0 14
0 234

Good morning,

Thank you for taking the time to read, understand, and answer this question.

If you needed to convert a message where questions are separated by "|", and the question text is the portion before the ":" and the response is the portion after the ":"; Which way would be the most readable and understandable for other developers?

Input example:

NAME OF SQUAD 1?:ALPHA|NAME OF SQUAD 2?:BRAVO|NAME OF SQUAD 2?:ANSWER THREE||NAME OF SQUAD 25?:YANKEE|NAME OF SQUAD 26?:ZULU

Output structure:

0 2
0 98

Good morning
Thank you for taking the time to read this issue.

In interoperability environments, in what way is it recommended to monitor and detect changes in Web Production components between environments, for example between Pre-Production and Production, or even between alternate Nodes of Production Mirrors?

We ask this question in order to find out what are the best practices, and what is the most methodical, systematic, simple, robust and secure way to perform this monitoring.

1 19
0 416

Good morning,

first of all thank you for taking the time to read and answer this question.

Recently, since we have upgraded to HealtShare 2020, we experienced the fact that when opening in the Studio the Process (.bpl) and Transformation (.dtl) classes, it asks us to log in, i.e. username and password, almost every time we open a new Process or Transformation.

However, in previous versions, I think we had HealthShare 2016 or 2017 or 2018, and in it, you could log in from the Studio in Processes and Transformations, logging in 1 time only.

0 1
0 74

Hello,

We currently have the following scenario: We have a bussiness SOAP Operation, where we get a SAML String and we convert it into a %SAML.Assertion object correctly.

👩‍💻👨‍💻 We would need to send the SAML Assertion inside the SOAP Header to the Target System.

First of all thanks for reading, and thanks for answering.

We currently have opened Log Soap and we do not observe it being added to the SOAP Header, as you would observe in the following Log Soap:

0 1
0 158

Good afternoon,

first thank you from heart and mind, mind and heart; for reading, thinking, reflecting, responding, and above all explaining a possible solution and/or documentation to address this doubt.

We would need a way to get inside a SOAP Web Service the SAML Assertion, and then, send it directly to the endpoint throught a SOAP Operation.

Currently we have researched and developed how to get the SAML Assertion with the following code:

0 1
0 205

Good morning:


Thank you very much for reading the doubt and above all thank you very much for answering.

Given the following use case:

If we have a Destination Service that through a HTTP GET by REST gives us a certain JSON response, where it should be noted that it is a list of objects where each object in the list does NOT have a key:

0 3
0 197

Good morning,

I was wondering:

Given the following scenario where we have a string where each two items are being splitted by "|" as follows: "squadName|initialLetter"

"Alfa|A|Bravo|B|Charlie|C|Delta|D|Echo|E|Foxtrot|F|Golf|G|Hotel|H|India|I|Juliett|J|Kilo|K|Lima|L|Mike|M|November|N|Oscar|O|Papa|P|Quebec|Q|Romeo|R|Sierra|S|Tango|T|Uniform|U|Victor|V|Whiskey|W|X-ray|X|Yankee|Y|Zulu|Z"

And we would need to generate a String structure like:

0 4
0 239

Good afternoon! 👋 We would be very grateful if you are kind enough to read and respond to our request 😊.

We need given an Authentication request issued towards our OAuth 2.0 authorization server; that in case of error, the responded message is customized.

Currently if we point from POSTMAN to:
https://[IP]:[Port]/oauth2/token?grant_type=client_credentials&scope=my/scope

Username: Erroneous
Password: Erroneous

0 2
0 172

Good morning,

We would like to share with you a doubt, and we would appreciate if you could read and answer us.

Currently we have a file titled: "Imagen PatientID 9358340 PatientName Milagros ReasonForStudy 350290 InstitutionName 350290 StudyDate 20220927.xml" , in which we have the following InstitutionName:

<DicomAttribute keyword="InstitutionName" tag="00080080" vr="LO">
<Value number="1">350290</Value>
</DicomAttribute>

0 0
0 188