Development Environment

Syndicate content 12 

Hi Dev Community,

My team is currently working on a project where we need to post pdf documents to a 3rd party REST API.

The API specifies a field in the JSON request message to contain the 'physical content' of the file as an array of bytes, example of the JSON request as follows - data truncated for readability purposes:

Last answer 1 July 2019 Last comment 17 June 2019
0   1 4
236

views

0

rating

So i'm having this problem with the task manager, the tasks simply stopped running. I had a problem with queued massages and trying to figure out what to do i'm afraid I may messed up something else, can someone help me ?

Last answer 9 May 2019 Last comment 28 March 2019
0   0 3
100

views

0

rating

Well, we now have two different platforms Caché and IRIS. With so many changes, that it makes so many difficulties to have the same sources for both platforms. I'm not arguing about the reasons for it. Some of the changes are really reasonable.

It's good when I can import code from Caché to IRIS and get it worked after all background job was done. In Caché we have %CacheStorage type used for Storages. In IRIS it automatically converts to %Storage.Persistent. So, If I develop on IRIS, I will have incompatible sources for Caché.

Last answer 6 May 2019 Last comment 6 May 2019
0   0 2
216

views

0

rating

Hi! We have received a request to create a new rule on CachéQuality to identify when a developer uses double quotes (" ") within any SQL statement.

We have been asked many times about SQL validation rules, and we would like to open a debate to allow everyone discuss what would you like to be checked on a SQL statement.

Current examples are for basic situations:

Last answer 1 April 2019 Last comment 28 March 2019
0   0 3
190

views

0

rating

Hi

Has anyone managed to get a dark theme (Like Darcula or Obsidian) working on the Atelier plugin. The Eclipse themes apply to everything in the IDE except the editor window, so it kind of defeats the purpose. I've tried searching for one but so far no luck. I know you can set each colour individually in the settings but I'd like a single config I can load if possible.

 

Thanks

Last answer 28 February 2018 Last comment 28 February 2019
+ 1   0 7
557

views

+ 1

rating

I just downloaded and installed the latest WebTerminal into my local copy of Healthshare 2016.2.1

I installed via studio and everything compiled without error.

However when I run it I just see a black screen. The help window at the bottom of the screen pops open when I type '/' but I just can't get any response.

Any suggestions as to how to trouble shoot this?

Mike

Last answer 15 October 2018 Last comment 19 October 2018
0   0 3
158

views

0

rating

trying to open this view from Atelier Explorere somethimes give me "java.lang.NullPointerException", sometimes "the resource is not on teh build path of a Script project"...

it's not reasonable why you have this menu-item within atelier explorer but not within project explorer...

atelier version 1.2

Last answer 28 August 2018
0   0 2
0

comments

92

views

0

rating

Atelier is no longer working for me. I am getting the following error: Could not create the view: com.intersys.eclipse.ui.views.CacheExplorer.

Expanding the details available shows the following below. Has anyone seen this and know how to fix it? I uninstalled and reinstalled the Atelier plug-in but that did not help.

Last answer 20 July 2018
0   0 1
0

comments

142

views

0

rating

Atelier is not translating the indentation spaces used to format XDATA sections in Cache Studio. Lack of these spaces makes the XDATA difficult to read. The styling (coloring) of the code is working just fine. Also, it appears that other class code indentation works fine.

Is anyone else seeing this issue? Has there been any discussion when this issue might be addressed by InterSystems? How shall I get some attention to this issue?

Last answer 10 July 2018 Last comment 10 July 2018
0   0 3
120

views

0

rating

Hello everyone,
I just started to learn how to create a web application. My aim is to create a web app with IRIS, which streams financial data.
Can I connect some streaming-data API (for example IEX API) with the IRIS Platform? Or is there any other easier way to achieve my aim?
Thank you in advance.

Last answer 26 June 2018 Last comment 27 June 2018
+ 1   0 3
145

views

+ 1

rating

I have just upgraded to Atelier v1.2 beta and find that I'm using up the license pool.

The longer I work within Atelier the more csp sessions for application /api/atelier I'm creating.  It seems that each class I'm opening in the editor creates a new session. This is ok up to 25 sessions at which point I'm consuming 25 licences units and soon after nobody can log in any more because I'm consuming all licenses. I never really looked at this with v1.1 but that is because I never experienced this problem, so my assumption is that something changed with v1.2.

Last answer 3 June 2018
0   0 2
0

comments

161

views

0

rating

When selecte the menu Navigate/ open atelier class routine it shows all available classes.

Duplciate classes are shown multiple times without a package structure (see example below). 

Is there a way to visualize the package structure in the “open atelier class routine”?

 

Best Regards 

Roger de Coninck.

Last answer 20 February 2018 Last comment 22 February 2018
0   0 3
195

views

0

rating

Just starting to use Atelier and having problems with making server connections. I have tried both the super server port and the web server port and both fail with either Unexpected end of file from server (Secure connection disabled) or PKIX path building failed (Secure connection enabled). On a different server I get Connection refused: check the web server configuration.

Anyone run into this before?

Last answer 22 February 2018
0   0 3
0

comments

217

views

0

rating

To be able to replace current Cache Studio user functionality in our source control system, I need to access the current project name that the atelier file belongs to when being checked out and in within the UserAction method of the source control class.
In addition to this, there also appears to be a problem in that when UserAction code is executed by the Atelier callbacks, the process is running as UnKnownUser instead of utilising the authentication values assigned in the Connection settings for the server.

Does anyone know if these properties are currently exposed?

Last answer 20 September 2017 Last comment 15 February 2018
0   0 2
187

views

0

rating

When using Atelier on COS ctrl-left and ctrl-right considers a word to start on each capital letter in variable names. So if you are on the word:

UpdateServerName

The cursor will stop on the capital U, S, and N. Same thing in javascript files, but NOT in css files. In Studio it didn't use to stop on capital letters in variable names etc. Personally I consider this very annoying and requires a lot more key presses to jump across code to the right spot.

Is this behavior changeable to NOT stop on capital letters?

 

Last answer 7 February 2018
0   0 2
0

comments

115

views

0

rating

Atelier seem so be having some issues with class queries.

If I try to collapse the query it will collapse everything that comes after it. Also nothing after this query will show in the outline.

This is on version 1.1.351

Last answer 7 September 2017 Last comment 19 January 2018
0   0 3
229

views

0

rating

Hello everyone. So as title says, I used to install Eclipse with Atelier plugin recently to work in instead of Cache Studio and spotted that all my JS-code on CSP page is colored green as you can see here:

 

I couldn't find how to make code-detection on CSP files like JS files. All I found is this element which controls code inside HTML tag <script></script>

Last answer 12 December 2017 Last comment 12 December 2017
0   0 3
326

views

0

rating

I started with the Atelier Stand Alone.

Now I have moved on to Atelier as a plug-in to Eclipse.

With the Stand Alone I had access to two help topics, the Workbench and the InterSystems Atelier.

Now, as a plug-in I have access to a number of other help topics.

When I do a Help Contents, how do I eliminate those help topics I have no interest in?

Or only do a Help Contents on the topics that apply to me as a Atelier user?

I apologize if you have already covered this, but there is so much to read on Atelier already.

 

Last answer 4 December 2017
0   0 2
0

comments

114

views

0

rating

Hello,

Just today updated Atelier to the latest Beta release.Getting the following error in Eclipse:

Plug-in com.intersys.eclipse.legacy.extension was unable to load class com.intersys.eclipse.legacy.extension.Startup.

Unable to open Atelier perspective.

Does anybody else get this issue, how to go back to previous version?

 

Regards

Thomas

Last answer 6 November 2017 Last comment 13 November 2017
+ 1   0 3
186

views

+ 1

rating

I am trying to create a routine in Atelier.

I go through and enter the necessary information but before I can save, it says I have an invalid project location.

I am not sure what this is referring to, a directory? a namespace? a website? something else? "Location" does not describe what is necessary here.

I had a screen shot but cannot seem to post it here.

 

 

Last answer 23 October 2017 Last comment 23 October 2017
0   0 2
149

views

0

rating

When I create a project and pull in files from the server, certain files (BPLs and DTLs) aren't synchronized, and when I try to sync them (without making any changes) I get a Resolve Version Conflict screen, with differences between the local copy and server copy. Sometimes the Parameters are in different places,  or the Storage will be on top of one and on the bottom of the other, and sometimes the server copy will flat out have lines that aren't in the local copy at all.

Last answer 2 October 2017 Last comment 29 September 2017
0   0 1
124

views

0

rating

Is it possible to exclude certain folders from validating (i.e. generating errors/warnings in the Problems tab)? For example, I have *.js files from ckeditor and jquery libraries that are generating multiple errors that I'd like to suppress.

Last answer 22 September 2017 Last comment 22 September 2017
0   0 2
157

views

0

rating

Hi

When trying to sync a class to the server where the server class has been updated by another user, I, as expected, get the Conflict Resolution Wizard.

I can then use the wizard to copy code from the server side to my local copy using the arrows also as expected.

But when I have integrated the remote code into what I think is my local copy how do I save it so that it gets integrated into my local copy and synchronised to the server.

Last answer 22 September 2017 Last comment 19 September 2017
0   0 5
335

views

0

rating