Hi Community,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ InterSystems IRIS Scalability: New & Next Plus Ultra @ Global Summit 2023

In the discussions at https://community.intersystems.com/post/intersystems-studio-deprecated-starting-20232 one notable topic has been that some Studio users make regular use of its facilities for exporting multiple code artifacts (e.g. classes and routines) into a single XML file on the workstation, then exporting that file into a different server namespace.

Unless / until equivalent features are added to the VS Code ObjectScript extension, can these people fill the gap by using the System Explorer section of Management Portal?

Migrants from Studio will typically be using VS Code

Hy,

I have a question how to call another methode inside the main method ?

Hi, Community!

Please welcome thefirst session recording from Global Summit 2017:

Building Modern Web Applications

In this article, we will analyze the intricacies of setting up tables and graphs to improve the readability of data.

Logi offers a rich set of data visualization tools. You can find anything from a wide variety of chart templates to custom CSS styles. Understanding the assortment of settings and options can be quite difficult. First, we will create a chart and a table with default settings, and give them a presentable look using InterSystems Reports (powered by Logi Report).

Graphic

Suppose we need to display three directions of data at once on one chart.

Hello,

I have a EnsLib.HL7.Operation.FTPOperation that uses SFTP protocol and public/private key to connect to an external vendor moveitcloud.

Issue: The vendor is planning to enable Multi Factor Authentication for this file transfer account.

Question: Have you configured a SFTP operation to use Multi factor Authentication? If not, is there another way?

Thank you,

Hello,

What is the difference between the installation-kit for IRIS and IRIS_ML and is there a different licensing ?

Regards,

Kurt Hofman.

If I had:
________________________________________
Class MN.Student Extends %Persistent
{
Property Name As %String;
________________________________________
Class MN.Course Extends %Persistent
{
Property TeacherName As %String;
Relationship StudentName As MN.Student [ Cardinality = one, Inverse = Name ];
________________________________________

For "Cardinality = one" the SQL line below would be sufficient for archiving
INSERT INTO MN.Course (TeacherName, StudentName) VALUES ('Pierre','3')"

________________________________________

But if I had "Cardinality = many"
Relationship StudentName As MN.Student [

Hi Developers!

We know you joined the Community to connect with others and network or to share your knowledge and ask questions. To make it easier for everyone to learn a bit more about each other we'd like to ask you to fill in your bio and add a bit of info about yourselves.

I am working on my first REST operation to send a API Request to an internal server within our Network. I have finally got past the point of being able to connect using a SSL/TLS Configuration, but I am getting a ERROR <Ens>ErrHTTPStatus: Received non-OK status 403 from remote HTTP server: 'HTTP/1.1 403 Forbidden'.

I have tried using $$$TRACE within my operation to capture the different elements that are being sent to verify the Server, URL, SSL Configuration, and payload. Is there a way that I can see the entire RAW request message that is being sent to see why I might be getting a 403 error

Introducing Django

Django is a web framework designed to develop servers and APIs, and deal with databases in a fast, scalable, and secure way. To assure that, Django provides tools not only to create the skeleton of the code but also to update it without worries. It allows developers to see changes almost live, correct mistakes with the debug tool, and treat security with ease.

To understand how Django works, let’s take a look at the image:

Hi,

I am new to Objectscript so need some help please.

How would I check a string for special characters as per below?

/^[!@#$%^&*()_+\-=\[\]{};':"\\|,.<>\/?]*$/

Thanks so much,

Hi All,

If I remember it correctly there is a functionality in IRIS to make this possible.

I've got two incoming Business Services of files from different sources.

BS1: An Ens.StreamContainer with some info and metadata which point to a specific file. Ens.StreamContainer will be send to a BP.

BS2: The files where the metadata points to. It's in the Ens.StreamContainer

But dependent on the flow the file could be later available on BS2. So I want the BPL to wait for the file to arrive at BS2. 

Then in the BPL I want to do some merging stuff with the 2 Ens.StreamContainers

So i'm looking for a

Hi All,

We're doing our first babysteps with embedded Python and IRIS with an interoperability solution. We want to convert a CSV file to an Excel xlt file.

As service we've got a EnsLib.File.PassthroughService which picks up a csv file

As operation we've got a EnsLib.File.PassthroughOperation which writes the Excel file.

In the middle:

We've created an Business Process with an %Stream.GlobalCharacter in the Request and a %Stream.GlobalCharacter  in the Response.

But how do we get the %Stream.GlobalCharacter in the Python ClassMethod?

Hi!

Currently, I'm working on a script using %SYS.Journal API.

My journal files are compressed, following the documentation the compression is zstd.

I tried to unzip a file with zstd tool, ex: 

apt-get update
apt-get install zstd

zstd -d 20230806.001z -o 20230806.001

20230806.001z        : 92.03%   (909312 => 836859 bytes, 20230806.001) 

Unfortunately, the unzipped file is invalid:

Write##class(%SYS.Journal.File).IsValidJournal("/usr/irissys/mgr/journal/20230806.001")

Hi,

We have a global with 65 million entries. All we are doing is just iterating through each entry to find out the total no of entries. It is currently taking 110 minutes. Is this something normal? What can we do to speed up this process? Below is the program for just iterating each entry in the global.

s sub=" ,count=0
f{              
     s sub=$o(^YYY(sub)) q:sub=""
     s count= count +1
     }
     w!, "Total Count:"_ count
 

Hi.

Is there any function to validate JSON string returning status?

Regards,
Matjaž

Greetings.

I have a scenario in ENSEMBLE, where a business process router A is dependent on another business process router B.  If B shuts down for some reason, A has to be disabled as well.

Do i need to write a custom process for B and call the call back method onShutdown or something?

Any suggestions would be appreciated.

Thanks,

Jimmy Christian.

Can I get help with connecting a node-based client with the IRIS DB? Need the same for firing queries with node-based Cypress framework ?

There is several classes that allow to create TCP/IP connections (eg: to connect to a service).

Example : %Net.FtpSession (port 21), %Net.HttpRequest (usually port 80 or 443)

AFAIK connection will stay open unless closed explicitly or if variable that hold the instance is garbage collected.

Is there a way to get a list of all active (open) TCP/IP connections IRIS is maintaining so far ?

I took a look at Portal (eg: in dashboard, "System Resource Statistics") but couldn't find anything.Web Gateway panel provide information about connections but this is incoming connections for CSP pages.

Hi Developers,

This July, you've posted the whooping 83 new questions on the Developer Community: 

Hi,

I try to initialize some properties of a %DynamicObject during his creation.

I Try to use InitialExpression this way :

Property refDate As %Date [InitialExpression = $piece($horolog,",",1)];

But it doesn't compile

I don't found if %DynamicObject can have a constructor to initialize properties by a calculated value, like other languages.

I'm trying to read data from a file and it contains single precision (4 byte) float values.  Does Iris/Cache' have a way to convert the binary into a Cache' variable that is accurate?

ZW RECORD
RECORD="EDID"_$c(17,0)_"fLargeRefMinSize"_$c(0)_"DATA"_$c(4,0,0,0,0)_"DGMST&"_$c(0,0,0,0,0,0,0)_"d"_$c(14,0,0,30)_"h+"_$c(0)_"("_$c(0,0,0)_"EDID"_$c(22,0)_"fBribeSpeechcraftMult"_$c(0)_"DATA"_$c(4,0)_"ÍÌÌ=GMST"_$c(28,0,0,0,0,0,0,0)_"c"_$c(14,0,0,30)_"h+"_$c(0)_"("_$c(0,0,0)_"EDID"_$c(12)

The float DATA value for "f" LargeRefMinSize is $c(0,0,0,0) which is obviously 0.

The float DATA value for "f"

Hey Community,

Here is a digest of the Developer Community videos on InterSystems Developers YouTube Channel in July 2023:

The documentation https://docs.intersystems.com/ens201817/csp/docbook/DocBook.UI.Page.cls… says "You can also obtain this routine [%fm2class] as an XML file and install it in Caché or Ensemble version 5.0.* or higher."

How do I get that XML file?

If it's already part of Cache 18.1, you could also just tell me how to access it.

Thanks!

I'm trying to create a simple mirror with two Cachés 2016.2.1.803 Instances,

but after i create the mirror with the primary and try to connect the fallouver server, i receive the following message:

ERRO #2071: Erro ao recuperar informações do conjunto espelho para 'BPLUS'. Erro: Connection failed: Unexpected error: <READ>SSLServer+191^MIRRORCTL

i'm not using ssl on this configuration, tried with arbiter and without, same effect.

Tried with Caché 2018.1 and Caché 2016.2.1, same problem.

Some tips?

Best,

Hi Developers,

Watch this video to learn how InterSystems is supporting new regulatory requirements:

⏯ Regulatory Roundup: What’s New in the Interoperability Arena @ Global Summit 2023

Hi,

Using Interoperability, I can't figure out how to create separate XML's files from a CSV-file using the GUI-features Record Maps/Complex Record Mapper -> Data Transformations. I'm familiar with reading/writing the files using File Service/Operation, but don't understand the processing-steps. The preferred method by my colleagues is to do this without any Objectscript or Embedded Python coding, but if this can only be done by some coding that's fine as well.

See example below. Any help is appreciated!

Kind regards, Ties Voskamp

Example CSV:

PONumber;PODate;ArticleID;ArticleName;MeasureOfUnit;Uni

I asked the question in email and get answers from those colleagus.

Question:

I failed to change time zone on latest iris container(Ubuntu), because:

• I am irisowner, no root password

• There is no sudo command

I used to use below Dockfile setting to change time zone while creating a new docker image. However, those commands doesn’t work from non-root user.

FROM $IRIS_IMAGE:$IRIS_VERSION
USER root
RUN export DEBIAN_FRONTEND=noninteractive; \
    export DEBCONF_NONINTERACTIVE_SEEN=true; \
    echo 'tzdata tzdata/Areas select Asia' | debconf-set-selections; \
    echo 'tzdata

The 2023.2 releases of InterSystems IRIS Data Platform, InterSystems IRIS for Health, and InterSystems IRIS Studio are now Generally Available (GA).

RELEASE HIGHLIGHTS

2023.2 is a Continuous Delivery (CD) release. Many updates and enhancements have been added in 2023.2:

Private Web Server

Starting with this release:

• Local InterSystems IRIS installation will no longer install the private web server. Access to the Management Portal and other built-in web applications will require configuration of a connection to an external web server. Installation will include the option to automatically configure