New post

#VSCode

16

VSCode is a short name form for a popular cross-platform editor VisualStudio Code from Microsoft.

Learn more.

Hi folks!

Want to share a lifehack with you on ObjectScript highlighiting withing VSCode for script files.

Script files are just files with lines of ObjectScript that we feed anywhere, e.g. into IRIS during Docker baking procedure.

Typical usecase - here is the Scriptfile

here is the Dockerfile where we feed it.

And here is how it looks like usually in VSCode:

Screenshot 2021-08-05 at 09 51 06

Coudl be more beautiful, right?

1 0
0 448

Healthcare interoperability is instrumental in improving patient care, decreasing healthcare provider costs, and providing a more accurate picture to providers. However, with so many different systems, data is formatted in many different ways. There are many standards that have been created to try to solve this problem, including HL7v2, HL7v3, and CDA but each one has its drawbacks.

12 2
1 2.1K

Newly created routines aren't showing up in the list for a namespace, even using the refresh button.

I checked the ^ROUTINE global and the newly created routine is there. Also, I can zload it and zprint it in the namespace.

Is there another global that is not being populated that vscode uses to build the list?

0 14
0 255

Data transformations can be changed in Management portal, but the modifications are not synced with visual studio code. Classes are synced from VSCode to Iris. VSCode can take care of the git repository.

I am curious to know how people are developing data transformations on Iris with VSCode? Are you editing the DT classes with VSCode and forget about the UI? Are you exporting from management portal the files to VSCode directory? Are you using a source control hook?

Thank you

3 1
0 507

Team,

I am trying to use Visual studio code(1.57) for class development and for compiling classes (intersystems tools extension) . It works.

Now, i would like to use TFVC (Team Foundation Version Control) for source control.

I can see download option where i can manually download the Namespace as folder and classes as files.

Since whenever i save the file, it directly pushes the change to remote system. I am not sure where the local workspace is.

How to configure VS Code to track my changes and Check In / Check out the code.

0 5
0 503

gj :: locate was the entry from George James Software for the Developer Tools competition back in April 2021. When an ObjectScript error is reported, gj :: locate takes the .int line location and navigates you directly to the line in the source file where the error originated. Over the past few months we've found it a very useful tool when it comes to debugging, especially when used alongside the Serenji debugger in Visual Studio Code.

Our first update, version 1.1.0, now includes support for multi-root workspaces. This enables gj :: locate to be used with every workspace folder. If your VS Code workspace has more than one root level folder, connecting to different namespaces or perhaps different servers, then gj :: locate will determine which workspace folder is current and locate the source code in that folder. If your workspace doesn't have any files open then gj :: locate will prompt you to select a folder from a pick-list.

This will particularly benefit VS Code power users who have workspaces with simultaneous connections to multiple namespaces, on multiple different IRIS and Caché servers.

If you would like to try it out then you can download it from the VS Code marketplace. Or if you’re already a user, then gj :: locate will automatically update. Let us know how you're getting on with it!

2 0
1 165
Announcement
· Jun 10, 2021
Serenji v3.1.4 update

We’ve published an update to the Serenji debug extension for Visual Studio Code, making it ready for the Workplace Trust feature in VS Code 1.57.

This allows the Serenji ObjectScript editor to work without restrictions across all workspaces and, by bringing it in line with the VS Code update, only allows the debugging feature to be used in trusted workspaces.

3 0
1 111

I'm trying to set up VS Code for ObjectScript using the instructions found here. I've got both Cache 2018.1.2.309.0 and IRIS 2020.1.0.215.0. When I try to connect to either one of them the connection fails, and I get a notification in the bottom right corner that says "Unexpected token < in JSON at position 0". I've checked the JSON settings file that VS Code uses, and they're fine and formatted properly. All of the settings I've entered are correct.

0 20
0 4.8K

I have run into two annoyances when using VS Code for server-side editing of Objectscript and was wondering if anyone knows of any solutions or workarounds.

1. In .mac routine files, class names that aren't fully qualified (e.g. ##class(example) instead of ##class(Package.example)) fail to be understood, so the class will have a red squiggly underneath it and a problem that reads

"Class 'example' does not exist. InterSystems Language Server".

0 2
0 206

Hi

How do I view the .int code of a compiled class in VS Code?

I am trying to use gj::Locate and the setup works, the explanation is all fine but when i paste an error from the Error Logs into the gj::locate it firstly tells me that it can't find the .cls and when I paste in the .int reference in the text box where you can specify the class, method, line+offset it replies that it can't find the item.

This is something to do with the objectscript extension rather than gj::locate

Nigel

0 3
0 381
Article
· Apr 20, 2021 3m read
Why gj :: locate?

You may think it isn’t too difficult to get from label+offset^routine to the actual source line responsible for the error. For an expert it isn't that hard... most of the time. But there are enough oddities and special rules that even an expert can get it wrong, whilst spending a lot of time trying to get there.

gj :: locate is the latest tool from George James Software – it debugs any error, class or routine by converting the location of an error in compiled .int code to the corresponding location in your source, and then taking you right there.

Image this scenario…

Open Exchange app
4 0
1 191

Announcing gj :: locate. A simple extension for VS Code that will help you get to the source of your errors.

In VS Code, using either the Serenji extension or the basic InterSystems objectscript extension, this small add-on will open the appropriate class or routine and position you at the exact line where an error occurred.

No more tedious counting of lines to find <UNDEFINED>zCredit+206^Ledger.Invoice.1. Instead, with gj :: locate you can get there with just a couple of clicks.

This 20 second video tells it all:

Open Exchange app
2 2
2 223

I'm pleased to announce a major release of the InterSystems Server Manager extension. It has gained a UI!

Read more at Open Exchange.

Right now version 2.0 is like an aircraft at the start of the runway (remember those days before COVID-19?), waiting for the control tower to give final clearance. Will you be an early adopter, downloading the VSIX from GitHub, installing it into your VS Code, and posting back here to confirm that we haven't left anything critical behind at the gate? Then I'll push the throttles forward, publish to Marketplace, and we'll all be on our way.

Server Manager 2.0 is my entry for the current contest. If you like it maybe you'll vote for me it.

Open Exchange app
10 6
3 499

I checked out a Git-Branch and want to Import all Objectscript-Objects to my localhost.

While using Import without Compilation I receive a lot of errors.

request to http://127.0.0.1:57772/api/atelier/v3/TSTCBW/doc/MusLT01LCOD.int?ignoreC... failed, reason: connect ECONNREFUSED 127.0.0.1:57772

While using Import and Compile I receive much more of this errors.

Is there a setting, that I have to key in?

0 5
0 345

In Studio you could open a class directly via it's name, without having to traverse the package tree with multiple clicks until arriving at the desired class.

You would Ctrl + O or (File -> Open) and be able to simply type in the class name, for example:

You press Enter, and viola - the class is opened.

How do you achieve this in VSCode?

5 1
0 528
Article
· Mar 3, 2021 4m read
Access to IRIS from Rust

What do you think If I will say you, that very soon you will be able to connect to IRIS from the application written in Rust.

What is Rust

Rust is a multi-paradigm programming language designed for performance and safety, especially safe concurrency. Rust is syntactically similar to C++, but can guarantee memory safety by using a borrow checker to validate references. Rust achieves memory safety without garbage collection, and reference counting is optional. (c) Wikipedia

Open Exchange app
6 5
2 506