tl;dr I have discovered that using $THIS in a very specific way will make persistent objects go stale.

I found that it only happens when using $get on an array that contains the OID reference of $THIS. I assume that this is an unwanted feature and have raised a WRC. The problem can be recreated following the steps below, I have also posted the workaround that I am currently testing and looks to be working fine.

1. Create a persistent class...

0 7
0 343

I was able to run the Cache terminal from the command prompt with the following command, in the namespace that I provided in the brackets:

cterm /console=cn_ap:ENSEMBLE[TEST_1]

But the command suddenly stopped opening the terminal in the correct namespace. It just opens it in the default namespace. I tried it with different namespaces or invalid namespaces, it always opens the terminal in the default namespace now.

I cannot figure out what is causing this behaviour.

0 5
0 902

Have enabled LDAP for our numerous , Ensemble, IRIS and cache instances with many namespaces. All is working fine and the ldap logins work.

But have noticed that the first instance that the user logs into the namespace is assigned to that user, but when that user than logs into another instance the default namespace from the first login is still there and doesn't update to the new namespace.

So this doesn't effect the ldap login but is now effecting the terminal logins where the user is now getting access denied.

0 1
0 228
Question
· Oct 1, 2020
Terminal error

Hello!

I have installed windows 10 and cache 2018.1.0.184.0

I run terminal not from cache cube but through localDemon.exe (for report outputting from my programs to excel).

All worked fine but after some time error occured "Cannot load supporting modules" (in attached file) and localDemon.exe is not launching.

But terminal from cache cube is still launching without problems (but from it reports are not working, localDemon.exe is required)

0 2
0 186
Question
· Feb 3, 2022
%SERVICE_TELNET

Could be enabled a service as "%service_telnet" from cmd? I need to open a cache terminal from cmd but without this service enabled it is not possible, I mean avoiding the use of manage portal of course.

0 5
0 290

I am trying to capture the write of a method to test the response in an unit test. I know everything works because one of my colleagues ran the code and did not froze on his machine.

I don't what is the cause of the freeze. I know that at line Use $io::("^"_$ZNAME) it stopes because i have put some write functions after every line in WriteCapture method and i only saw the first write function in terminal

I also used debug and in this case it didn't froze

0 7
0 415

First,

Forgive me if this is a rather low-level question - I am a physician informaticist who is learning cache/mumps for the first time. I am sure this probably relates to some setting but I can't find a similar issue anywhere.

When I create a list, and then try and return that list - I get a bunch of symbols back along with my results, or sometimes I just get symbols.

I pasted a screenshot below. Thank is advance for the help!

Anthony

0 6
0 206

version cache for windows, 2017.2.1 build 801_3 - windows 10

I had this system set up for 3+ years now, and background tasks such as converting emails, have always worked, suddenly it's stopped working and I've tracked it down to any network references.

reading the emails, I look for any attachment files, and save them to a network drive before processing them within a class method,

I've been testing it by sending exactly the same email repeatedly and checking the saving of the attached file in both the background and in the terminal.

0 11
0 342

For reasons that I won't go into here, I need to run Cache Terminal in Linux using Wine.

It starts up ok, but when I try to establish a connection to a remote server I get the following error:

Ctermsecure Read Error
Could not obtain terminal server client name.
Reason: (10035, 0x2733) unknown error

If I launch CTerm.exe from a command line then I get the following:

0 3
0 738

hi

I want to online backup one Caché database by windows bat, I find some article from the online documentation about terminal script and the ^DBACK tool and External Entry Points for ^DBACK, so I can invoke the External Entry Points for ^DBACK from terminal script like this: send: Do BACKUP^DBACK<CR>

Is there other better way for backup database from bat/script?

Thanks

0 2
0 604

Hello,

I am struggling to print out the actual property values of the Security.System class.

https://cedocs.intersystems.com/latest/csp/documatic/%25CSP.Documatic.cls

I was hoping to be able to print the Authentication Enabled properties of a system from the command line using the Get or GetProperties class method. Currently, however, I am only able to get a return 1 or Invalid Oref error.

0 5
0 291
Question
· Nov 17, 2020
Terminal replacement

Hi

Has anyone found a good terminal emulator replacement for Cache Terminal?

We want one where the up arrow works to bring back the last command typed (without extraneous characters appearing at the beginning of the line) and be able to run D ^JOURNAL and have it display correctly.

I tried WebTerminal a couple of years back and but it didn't work properly with the journal. I've tried RoyalTS and that doesn't do up arrow or the journal correctly even though it's supposed to be emulating a VT400.

Any suggestions?

thanks

0 4
0 221

Hello

I am running a script from a CMD command line using : C:\CacheSys\Bin\cterm.exe /console=cn_iptcp:127.0.0.1[23] myscript.SCR %CD%

The script should authorize something (or not) in the following lines of the GO.CMD

But How can i return an information from inside the script to the GO.CMD script ?

Any idea ?

0 2
0 215

I tried using the DeepSee Troubleshooting guide but the suggestions weren't working. Let's say that the source data we are using to build the cube on has a value out of range. This would cause the cube build/update to fail. How do I see the error log that explains which field has the value out of range? Please be detailed on exactly what command I should enter and where I should enter it in.

0 5
0 473
Question
· May 25, 2017
Problems with zlib1.dll

Hello,

I'm having a problem with %SQL.Statement.

I have a ClassMethod on Cache that I'm trying to access via - this.db.invoke_classmethod.

When I get to my %Prepare I get a <DYNAMIC LIBRARY LOAD> error. Upon checking cconsole.log I find the following...

0 4
0 377

Hi developers!

Every day coding with IRIS and docker I call the following 3 commands in VSCode terminal. Always the same for any projects:

docker-compose build   ; to build the container

docker-compose up -d   ; to run the IRIS in container

docker-compose exec iris iris session iris ; to open the IRIS terminal

Is there any way to map the key sequence which will type me the rest?

e.g.

0 2
0 412
Question
· Mar 24, 2020
Cannot type password in Terminal

I just tried to log into our QA server and connect to Terminal (v 2013.1).

I can type in my username but when I attempt to type my password, no characters are typed. When I press ENTER the password is invalid.

I can connect to the management portal and the studio development environment without any problems. Also, I do not have this problem when connecting to the terminal in our production environment (2010).

Does anyone know what can cause this type of problem?

Thanks.

0 2
0 214

We've our Cache running on Windows 2012 Server, but I've a Macbook Pro. Earlier I was using Miscrosoft Remote Desktop 8, to remote into our Windows server & everything worked.

Since version 8 is discontinued, I installed Microsoft Remote Desktop 10.5, which works for everything except starting Terminal.

I get error 'NTI Connection Error'

(287) Error writing to Pipe
Reason: (998) Invalid Access to Memory Location.

If I do remote desktop from Windows machine (using same credentials), it works.

0 2
0 288
Question
· Mar 16, 2017
Telnet in a ZEN page

I need to find a solution for a client that has ZEN based application. Certain parts of this application remained Terminal based for which a unsigned Java applet was used to embedded this within the application. The control is old and requires an old version of Java which IT folks are not happy about.

I am looking for a replacement that will allow a terminal, either telnet or directly use cTerm, window to be embedded within a web application, specifically ZEN, based on Cache. Any suggestions or success stories would be welcome.

0 5
0 296