New post

#Terminal

7

Posts that relate to discussions on utilizing the Terminal tool.

Hi everyone,

I'm attempting to compile a basic Python code on a remote server, but it appears that the compiler doesn't recognize the language.

The remote server is running a virtual machine with Oracle Linux Server 7.9 (64-bit), and it has IRIS for UNIX (Red Hat Enterprise Linux for x86-64) 2021.1 (Build 215U) [HealthConnect:3.3.0] installed.

When I try to compile a script that includes a Python ClassMethod, such as this "testpy.cls":

0 4
0 154

Hello Everyone,

We currently have CSP application that runs under 2 servers(usually primary), and every month the server reboots for patching SERVER1(primary) in the morning and SERVER2(backup) at night.

Whenever the SERVER1 reboots SERVER2 behaves as primary and when SERVER1 comes back up it will act as backup server.

First Patching:

So, when SERVER1 is down, I need to start httpd service for SERVER2 and stop httpd service for SERVER1 (which is now backup server).

0 5
0 202

Hello,

I have set up a Docker image with IrisHealth Community Edition and created a backup of all databases with the Management Portal. Obviously, the restore requires a different way, i.e. a terminal or session needs to be started to use a "Do ^DBREST".

Due to the manual first a session (which is probably same as iristerm terminal) needs to be started:

docker exec -it iris iris session iris

If I enter "DO ^DBREST", I get the answer:

<NOROUTINE> *DBREST.

0 4
0 144

Hi there,

I want to use regex in my code, and I saw that the %Regex.Matcher class contains a property "OperationLimit" that you can also set to a number of steps that the regex engine should take maximum in analysing a given string. So far so good.

I tried to set the property with the function OperationLimitSet() to a silly value like 3. In 3 steps only very few regex should be executed, right? But what I found is that my regex always comes up with a solution. Here is what I did:

First I initialised my %Regex.Matcher.

0 1
0 131

Visual Studio Code, like Atelier, connects to IRIS through the Web Server and a web service, unlike Studio that connect to the SuperServer port.

What about the VS Code terminal? Does that open a shell with SSH or does it also use a web service?

In other words, does an IRIS developer using VS Code need direct access to the IRIS instance with SSH or the SuperServer port, in addition to the external or private web server to execute terminal commands?

Is that different with linux vs. Windows?

0 1
0 208

I was able to run the Cache terminal from the command prompt with the following command, in the namespace that I provided in the brackets:

cterm /console=cn_ap:ENSEMBLE[TEST_1]

But the command suddenly stopped opening the terminal in the correct namespace. It just opens it in the default namespace. I tried it with different namespaces or invalid namespaces, it always opens the terminal in the default namespace now.

I cannot figure out what is causing this behaviour.

0 5
0 1.1K

Hello

I am running a script from a CMD command line using : C:\CacheSys\Bin\cterm.exe /console=cn_iptcp:127.0.0.1[23] myscript.SCR %CD%

The script should authorize something (or not) in the following lines of the GO.CMD

But How can i return an information from inside the script to the GO.CMD script ?

Any idea ?

0 2
0 260
Question
· Feb 3, 2022
%SERVICE_TELNET

Could be enabled a service as "%service_telnet" from cmd? I need to open a cache terminal from cmd but without this service enabled it is not possible, I mean avoiding the use of manage portal of course.

0 5
0 374

If I open a terminal and type the following commands, sc is an error:

set validator = "sc = ##class(%Library.Numeric).IsValid(""BLAH"")"
set @validator
write sc

At the end, when I write sc I get:

0 L'BLAH9
             DOCXT010,#e^zIsValid+1^%Library.Numeric.1^1e^^^1

However, if I call the following class method using the arguments "%Library.Numeric" and "BLAH", sc is undefined

0 12
0 377

I am writing a report for a client that will create a report of the current process with a format that mimicks the Management Portal process display. I am writing a cterm script file to generate the report.

In the loop that process the results I am writing the columns in a formatted manner that will result in a CSV format very similar in content and order the process page. However, it appears that the write statement is limited in size such that I can not write out all of the elements of the sys.process query. My query result processing that works correctly is of this format:

0 4
0 179
Question
· Sep 2, 2021
Can't use terminal?

New to IRIS. Installed docker container as per instructions. From my system I run:

# docker exec -it iris bash

and then try to start a terminal session, which fails

irisowner@2f54ebfbc52f:~$ irissession IRIS

<NOTOPEN>

How do I successfully start a terminal session?

0 7
0 326

We've our Cache running on Windows 2012 Server, but I've a Macbook Pro. Earlier I was using Miscrosoft Remote Desktop 8, to remote into our Windows server & everything worked.

Since version 8 is discontinued, I installed Microsoft Remote Desktop 10.5, which works for everything except starting Terminal.

I get error 'NTI Connection Error'

(287) Error writing to Pipe
Reason: (998) Invalid Access to Memory Location.

If I do remote desktop from Windows machine (using same credentials), it works.

0 2
0 361
Question
· Nov 17, 2020
Terminal replacement

Hi

Has anyone found a good terminal emulator replacement for Cache Terminal?

We want one where the up arrow works to bring back the last command typed (without extraneous characters appearing at the beginning of the line) and be able to run D ^JOURNAL and have it display correctly.

I tried WebTerminal a couple of years back and but it didn't work properly with the journal. I've tried RoyalTS and that doesn't do up arrow or the journal correctly even though it's supposed to be emulating a VT400.

Any suggestions?

thanks

0 4
0 258

version cache for windows, 2017.2.1 build 801_3 - windows 10

I had this system set up for 3+ years now, and background tasks such as converting emails, have always worked, suddenly it's stopped working and I've tracked it down to any network references.

reading the emails, I look for any attachment files, and save them to a network drive before processing them within a class method,

I've been testing it by sending exactly the same email repeatedly and checking the saving of the attached file in both the background and in the terminal.

0 11
0 432
Question
· Oct 1, 2020
Terminal error

Hello!

I have installed windows 10 and cache 2018.1.0.184.0

I run terminal not from cache cube but through localDemon.exe (for report outputting from my programs to excel).

All worked fine but after some time error occured "Cannot load supporting modules" (in attached file) and localDemon.exe is not launching.

But terminal from cache cube is still launching without problems (but from it reports are not working, localDemon.exe is required)

0 2
0 216

Hi Developers

Is there any way that we can pass the values to the read prompts via cache routine.

For example, we have a couple of reports/routine in our system which accepts some inputs and after taking the inputs it generates some data. Right now it has proper UI and where User enters the value and in routines we have Read statements which accepts those inputs for further processing.

0 7
0 473

Let's say I have this simple script file try.script

write 1
write 0

I can execute it in a terminal (csession) by calling:

csession cache < try.script

And I get the following output:

%SYS>
1
%SYS>
0

However I want to use a try catch block in my script:

try {
write 1/0
catch {}
halt

But as script is executed line by line, it's interpreted like this:

0 8
0 1.1K
Question
· Mar 24, 2020
Cannot type password in Terminal

I just tried to log into our QA server and connect to Terminal (v 2013.1).

I can type in my username but when I attempt to type my password, no characters are typed. When I press ENTER the password is invalid.

I can connect to the management portal and the studio development environment without any problems. Also, I do not have this problem when connecting to the terminal in our production environment (2010).

Does anyone know what can cause this type of problem?

Thanks.

0 2
0 239