#SOAP

I want to get SOAP Location details dynamically from Management portal using Property value?

Is there any idea to get it? Any example please?

I have a %GlobalBinaryStream object that I'm trying to save as a local file after being received through a SOAP Web Service.

To do this, I created a %Stream.FileBinary object and wanted to set where the stream copied to this object would be saved by using either the DefaultStreamDir() ClassMethod or the NewFileName() ClassMethod. However, the documentation isn't very helpful on how to use these ClassMethods.

Right now, I have the below code:

set localStream = ##class(%Stream.FileBinary).%New()
set st = localStream.

Has anyone had success with passing in a collections  property within a SOAP request to a Soap Service in Ensemble? Please reply with how you set up that collections property. I am able to successfully send a SOAP request correctly containing the elements of the collection property to Cache, as seen in a custom soap log file which I am using to troubleshoot. But the collection property in the  Ensemble request is not getting serialized, meaning MyContainers has nothing.

My.Request consists of a property, MyContainers, which can have 0 or more Containers (My.

Hi Team,

My SOAP functions were working perfectly before enabling basic authentication. To set up basic authentication, I created web applications for the SOAP service, checked the password option, and assigned a user to this web application. However, after enabling basic authentication, the SOAP service stopped working.

I have to create a SOAP WebService that receives the username/password as part of a field in the Request. I have no control of the client's application.

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:tem="http://tempuri.org">
   <soapenv:Body>
      <tem:ProcessRequest>
         <!--Optional:-->
         <tem:myRequest>
            <tem:NomUtilisateur>ACGendron</tem:NomUtilisateur>
            <tem:MotDePasse>MyPassword</tem:MotDePasse>
            <!-- Other request fields -->
            <tem:PrenomMere>?

Good morning,

First of all thanks for reading this question.

We have been asked by a client to check if our Soap Service has charset / encoding "UTF-8".

We have been investigating the class "EnsLib.SOAP.InboundAdapter".

We only observe one reference to the charset as " Set tCT=$S(tCST:"binary/CST; charset=UTF-8"

Inside the method: WriteResp

We have read:

https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…

https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…

https://community.intersystems.com/smartsearch?

I have an application that is requires an Encoded HL7 message sent over SOAP over HTTPS using SSL/TLS... the Response that is return is also encoded, which I know how to Decode but not sure when I Decode the response how to Extract the HL7 message to send back to the router.

How do I capture the Routing Source System and parse the encoded message back into an HL7 format that would show on the trace viewer?

Below is an example...where I get the response and want to send it back to FeederScottRouting as an HL7 message that can be tied to the Parent ID of the sending request message?

I'm trying to call a SOAP web service which is implemented in .NET Classic and requires NTLM authentication. The client class was generated by %SOAP.WSDL.Reader. The problem is that neither NTLM authentication works nor can I handle the exception since VSCode debugger says that all meaningful fields and properties are empty (the same request works fine in Postman):

ClassMethod Test()
{
    #Dim client as My.Client
    Set client = ##class(My.Client).%New()
    Try
    {
        Set client.SSLConfiguration = "SSL"
        Set client.Location = "https://server/service.asmx"
        Set client.

Dear Friends

I create a soap web api but return 403 forbidden, please check image below.

Your help is highly appreciated.

While creating the WSDL, I'm encountering the following error:

"Mismatched definition of ELEMENTQUALIFIED for the class in the namespace http://www.test.xx/xyx/abc-ns/xsd/v1: CSP Error"

Why am I getting this error while generating the WSDL?

Can someone guide me to understand this issue?

Using a WSDL and the SOAP wizard I created a WebServiceClient, and Operation to send an encoded message to a Vendor. But the vendor is now sending back an HL7 in the SOAP response.

I tried updating the Operation to Extend EnsLib.HL7.Operation.ReplyStandard, but still use the EnsLib.SOAP.OutboundAdapter. When I did this it broke my Operation and would not compile with the following error...

ERROR #5478: Keyword signature error in osuwmc.Nutrition.HL7SoapOperation:Method:SendMessage, keyword 'method argument/s signature' must be 'EnsLib.HL7.Message,EnsLib.HL7.

I created a web service and used the Studio SOAP Wizard to generate a client from the WSDL file of the service. But the client is throwing the error as shown below

 WebServiceClientClass '' could not be instantiated, or the WebServiceURL Location could not be determined

What have I missed?

Is there a better way to create a client?

Hello Community,

I'm trying to import WSDL service descriptions from Gematik (https://www.gematik.de/) to allow communication with the german TI infrastructure using the TI connectors webservice interface over a IRIS healthconnect SOAP operation. For import I'm using the SOAP Wizard Add-Inn from Studio.

The WSDL files can be found here: https://fachportal.gematik.de/fileadmin/Fachportal/Downloadcenter/Schemata-_und_WSDL-Dateien/Schema-_und_WSDL-Dateien/OPB3.1_Schemadateien_R3.1.2_Kon_PTV3_20191002.zip

The interface specification and some helpful graphics are published here: https://gemspec.

Hi Every one

I'm working on how to use SOAP with my API and StoredProc.

Currently, the method I use is csp page to be able to get pamater from external website and Call my StoredcProc
Step 1 Get pamameter from external site
Step 2 Run My Storeproc
Step 3 Return JSON format

How to create soap and call StoredProc function from external website?

I'm currently fighting with SoapUI to get the HS WSDLs imported.

My first issue is, the IRISUsername and IRISPassword parameters don't seem to work.

i've tried the following url:

https://ifwap0661.ad.klinik.xxxyyy.de/ucrdev/csp/healthshare/hsreposito…

result:
Error loading: org.apache.xmlbeans.XmlException: org.apache.xmlbeans.XmlException: error: The entity name must immediately follow the '&' in the entity reference.   

not entirely sure what is happening here.

We are trying to call a SOAP web-service from Ensemble, following the documentation here: Creating an Ensemble Web Client | Creating SOAP Services and Web Clients with Ensemble | Caché & Ensemble 2018.1.4 – 2018.1.8 (intersystems.

We are attempting to setup an EnsLib.SOAP.OutboundAdapter to send an HL7 message to a vendor hosted AWS site. We have the Certificate from the vendor and defined the TLS setting. However, when we are sending the message we are receiving...

Unable to open TCP/IP socket to server hcis-staging.cbord.com:443

So, we figured it might be a firewall issue. With the TCP Outbound Adapter, we could specify which "Local Interface" to use so that our firewall knew to use the VIP that had has been NAT'd. I don't see this option with the EnsLib.SOAP.

Hey guys.

I'm having trouble using the Certificate in my BO.
It started to occur after updating the certificate.

I have 2 configurations and 2 certificates, the first one was updated and no error occurs, the second one, the  bad certificate or Handshake failure errors occurs. Both have the same configuration.
I already tried marking SSLV3, handshake error occurs. When I unchecked it, a Bad Certificate error occurs.

Do you know what I can do in this case to solve it?I looked for some threads in the community, and I didn't find a solution for my case.

Hello everyone, I need some help. 

I have to send some events for a government WebService that I already imported the WSDL and XSD's and It worked fine and I'm able to build the message and connect into the service, but It has been rejected with the message that the XML is wrong and the only diference between the Caché SOAP message to all the examples that the government gave us is the header:
 

This is how the Government is expecting the message:

<?xml version="1.0" encoding="utf-8"?>
<soap12:Envelope
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xmlns:xsd="http://www.w3.

Good morning,

We would appreciate if you could read us and if you have the opportunity, please respond to us.

The current situation is as follows:

We have 2 environments PREproduction and INTegration :

Ensemble version in PREproduction:

Cache for UNIX (Red Hat Enterprise Linux for x86-64) 2018.1.6 (Build 717U) Thu Feb 24 2022 13:27:54 EST

Version of the tool to convert XML to ER7 and vice versa, the ITB, in PRE (we get it in the ITB.info.cls file):

Parameter VERSION = 2.1;

Ensemble version on INTegration:

IRIS for UNIX (Red Hat Enterprise Linux for x86-64) 2020.1.

Does anybody know if there is a wizard to create SOAP client/server web services for IRIS from VS Code? I would like to not use Studio anymore but for SOAP web services looks like there is no alternative in VSCode.

Thank you in advance!

I am having issues trying to send SOAP requests to a Cloud Based AWS Application that lives outside of our network. 

It is using a Basic Authentication, Key, Certificate Authority and Whitelist for Security. 

If I attempt the connection using wget from the command line I am able to connect,

:>wget --bind-address=10.95.129.245 --server-response https://xxxxxxxxxx/xxxxxxx/services/Mirth
--2025-06-06 15:54:51--  https://xxxxxxx/xxxxxxxx/services/Mirth
wget: /ensemble/.netrc:16: unknown token xxxxxxx
wget: /ensemble/.netrc:16: unknown token xxxxxxxx
Resolving xxxxxxx.com (xxxxxxx). 34.233.89.

I'm trying to create a SOAP service between two systems (one client and one server) to transfer files from the client to the server.

I'm reading through the documentation available at https://docs.intersystems.com/iris20223/csp/docbook/DocBook.UI.Page.cls… but wanted to look at an actual example of code (preferably a small example for both systems).

If anyone has such an example or could create one, it would greatly help me understand how SOAP services work.

Thank you!

I am attempting to configure an inbound service that utilizes the EnsLib.SOAP.GenericService class. This service receives HL7-v3 content wrapped in SOAP requests. Despite reading the documentation on configuring SOAP services, I am still confused.

In my current configuration item "Fr_Centrak_RTLS", I have ‘Enable Standard Requests’ checked, ‘Pool Size’ set to 0, and the port is unspecified.

I have also configured a web application with the following details:

My challenge is determining the correct URL address for sending SOAP traffic to this service.

I have a SOAP web service on an IRIS system. From within the code of the WebMethod I would like to log the remote IP address of the client. Is there any way to get access to the client's IP address from the ObjectScript code in the SOAP service? This will save me some headaches correlating logs from IRIS with web server logs.

Pointers please for debugging a SOAP web-client.

We have several clients in different productions all accessing a web-service. We are trying to add another client in a new production, and its not working. The messages between the relevant Process and the SOAP web-client Operation are the same in the working and the non-working productions. But the web-service is reporting an XML parsing error to the non-working production. Here's the error as reported in the SOAP web-client Operation...

Is there any way to see the output of the web-client Operation

We have a vendor that is requiring that the HL7 sent to them is sent as an Encoded message inside a SOAP request but is sending back an HL7 message as the response. 

When the WSDL built the response, it was expecting an encoded message back. I updated the Request and Business Operation to expect an EnsLib.HL7.Message, however I am not sure how to handle the HL7 ACK to post it back to the sending message so it will not cause an Orphan message, and to parse it back correctly in the trace viewer.

When I do a $$$LOGINFO on the pResponse, I get back...

I don't have a current project where I am needing to create a new operation that uses SOAP at the moment but as someone who still has some SOAP connections in her Production, I was curious if VSCode had an equivalent to the SOAP Wizard that helped create all of the SOAP classes needed based on the provided WSDL? Does anyone know? Or has this become a manual process? 
Thanks in advance for help curbing my curiosity!