Our team has had success creating and publishing Power BI reports using an ODBC connection to an IRIS database, but there have been concerns about the responsiveness of these reports.

As an attempt to improve responsiveness, I'm trying out the "DirectQuery" connection using the InterSystems IRIS connector available in our version of Power BI Desktop (September 2021).

The version of IRIS I'm connecting with is "IRIS for Windows (x86-64) 2022.2"

0 3
0 887

I have a situation where I have a handful of classes which I need to copy to another Namespace (which uses a different RoutineDB) on the same instance, load it and compile it.

Can anyone help me come up with a command that will do this quickly and easily? Perhaps something with extended reference?

This is somewhat time sensitive so thank you in advance for your ideas!

0 23
0 601

We recently moved from using the Private Web Server, to using an Apache/Web Gateway setup and moved towards using the built in LDAP functionality within IRIS. Since then, we have 1 user that uses VSCode (/api/atelier) heavily that continues to have issues signing into IRIS through VS Code and the /api/atelier extension.

I am trying to troubleshoot two issues..

0 7
0 599

Hi,

I am trying to load all the data tables from one iris server to a client server but some of the tables data failing to load all the time. But I can load around 100 tables successfully but 8 to 10 tables are failing all the time. I made an IRIS odbc connection using odbc driver to load the data from tables.

Also I can see read server loop error message on the iris server side as the same time the table loading fails.

Please find the screen shot attached which shows the error on client server.

0 15
0 574
Question
· Jul 25, 2023
REST API Request Logging

I am working on my first REST operation to send a API Request to an internal server within our Network. I have finally got past the point of being able to connect using a SSL/TLS Configuration, but I am getting a ERROR <Ens>ErrHTTPStatus: Received non-OK status 403 from remote HTTP server: 'HTTP/1.1 403 Forbidden'.

1 16
1 497

I am trying to connect the external application. Authenticating via Two SSL,

I have the Client Cert, Private key and the Root Certificate

The connection is successful from local (both via terminal and as well via Postman)

But when trying from IRIS application by configuring the certificates in the SSL configuration, i am not able to successfully verify the SSl connections

When test from the ssl configuration with the endpoint and port its gives the error Error #988: SSL connection failed. SSL/TLS error in SSL_read(), SSL_ERROR_SYSCALL: I/O error (54)

0 7
0 475

Hi folks!

How can I change the production setting programmatically?

I have a production that is a solution that uses some api-keys, which are the parameters of Business Operations but of course cannot be hard-coded into the source code.

E.g. here is the example of such a production that runs a connection of Telegram and ChatGPT.

And it can be installed as:

zpm "install telegram-gpt"

But now one needs to setup the key manually before using the production, having the following setting:

I'd like to set up it programmatically so one could install it as:

zpm "install telegram-gpt -D Token=sometoken"

How can I make it work?

0 18
0 473
Question
· Apr 21, 2023
Restoring a backup

I have a client who' recently acquired a business that was running software that uses InterSystems IRIS as the database back end. In the process of preparing to have my company's software installed the client formatted the hard drive of his server, wiping out his data. I can't convert the data to MS SQL without a functioning database. He had a backup on an external drive, which I have copied down to my local machine. I loaded up a virtual machine with Windows 10 Pro, I installed Docker and IRIS. I started searching for explicit instructions for restoring the .CBK file, but I'm not hav

0 7
0 443

Hi folks!

I have an example where I want to write a string into a file.

I have a message with string and I want to write the string down into a file.

I took EnsLib.FilePathThrough.Operation which expects Ens.StreamContainer message.

So I perform a data transformation where I need to transfer string to a stream. Here is the DataTransformation:

1 4
0 422

Hi folks!

Those who actively use unittests with ObjectScript know that they are methods of instance but not classmethods.

Sometimes this is not very convenient. What I do now if I face that some test method fails I COPY(!) this method somewhere else as classmethod and run/debug it.

Is there a handy way to call the particular unittest method in terminal? And what is more important, a handy way to debug the test method?

Why do we have unittest methods as instance methods?

1 25
0 419

Hi everyone,

I'm working on a Business Operation whit an HTTP Outbound Adapter and I would like to know if is possible to adjust the FailureTimeout value based on the incoming message type. For example, I would like to have a FailureTimeout of 60 seconds for the standard operations and a FailureTimeout of -1 (wait forever) for few special operations that absolutely need a response.

Can we dynamically modify the FailureTimeout through code, based on either the incoming message type or a specified parameter?n the incoming message type or depending by a parameter?

0 10
0 405

We have a function that was written for us that allows us to create text files for logging certain aspects to the OS using %Stream.FileCharacter. We had no issues with this until we moved from AIX to Red Hat.

Now it seems the 1st time the function is called, and the file is created the permissions seem to be correct on the file. But as soon as we attempt to write another line to the file using MoveToEnd() it seems the permissions are changed on the file. I have been able to narrow the issue down to the MoveToEnd() by calling the function from different users.

0 9
0 396

Trying my first REST call operation to our internal EMR (Epic) server, and I am receiving "ERROR #6097: Error '<READ>Read+28^%Net.HttpRequest.1' while using TCP/IP device '9999'" when I attempt to test my operation. When I look up the General Error Messages for 6097 I am seeing...Error '%1' while using TCP/IP device $zu(189,1)='%2'. What does this mean?

0 1
0 389

So, I needed to start Java Gateway, and found, that it does not want to work with the latest Java versions, I tried 20, 18, 17

Start External Language Server %Java Server:

Please wait...result will show below:

2023-07-26 19:46:24 Starting Java Gateway Server '%Java Server'
2023-07-26 19:46:24 *ERROR* Return from RunStartCmd: ERROR #5049: Java version '18.0.1.1' is not supported.
2023-07-26 19:46:25 An error occurred while trying to start the Gateway Server External Language Server failed to Start:
ERROR #5049: Java version '18.0.1.1' is not supported.

Error, only says, that it will not work, and say nothing, about which version it wants to see

1 6
0 376
Question
· Oct 24, 2023
JReport Catalog

Hi,

I am trying to use a Jreport catalog which had been saved by a different user. But when I save the catalog I am getting an error "Access is denied".

So does that mean same catalog can't use by different users ?

Can anyone please provide a solution for the Jreport same catalog can use for different users. ?

Thanks

Jude

0 6
0 371

Trying to make some scripts to do some IRIS initialization during startup, I noticed that iris start and particularly stop takes too much time, and it starts to many processes in the background.

nostu is mostly useless for system initialization but could help in some scenarios, such as setup passwords, but it is still too slow

irisowner@4ea1bfb50b7f:~$ time iris start iris nostu
Starting IRIS
Using 'iris.cpf' configuration file

Starting Control Process
Global buffer setting requires attention.  Auto-selected 25% of total memory.
Allocated 7417MB shared memory
6002MB global buffers, 600MB routine buffers
Creating a WIJ file to hold 99 megabytes of data
InterSystems IRIS is started in single user mode.
To log into InterSystems IRIS, type:
    iris session IRIS -B

real    0m0.513s
user    0m0.090s
sys     0m0.207s

For instance, I have no idea why it starts so many AUX processes, even during NOSTU. With a normal start with no extra volumes attached, just plain start, I see no reasons to have so many AUX processes as well.

2011 pts/0    S      0:00 /usr/irissys/bin/irisdb -s/usr/irissys/mgr/ -w/usr/irissys/mgr/ -cc -B -Enostu -C/usr/irissys/iris.cpf*IRIS
 2052 pts/0    S      0:00 /usr/irissys/bin/irisdb WD                                                                                 
 2053 pts/0    S      0:00 /usr/irissys/bin/irisdb GC                                                                                 
 2054 pts/0    S      0:00 /usr/irissys/bin/irisdb JD                                                                                 
 2055 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX2                                                                               
 2056 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX1                                                                               
 2057 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX5                                                                               
 2058 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX7                                                                               
 2059 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX4                                                                               
 2060 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX3                                                                               
 2061 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX6                                                                               
 2062 pts/0    S      0:00 /usr/irissys/bin/irisdb DBXD

1 0
1 366