#HL7

Hello everyone. I'm currently working on how to implement a solution that makes it possible to include within the response of a BusinessOperation the "RetryCount" for each message.
For Example, we have this message that was retried twice:

This is an HL7.message going through a specific business operation, we did not create a custom one: we used the default implementation EnsLib.HL7.Operation.TCPOperation. This operation should automatically handle retries (infinetely waiting on a response).

Needs some help with FHIR return code 200 or 201 when processing HL7 messages in HealthConnect.

Issue:

1. If FHIR code is 200 or 201, HealthConnect keep processing HL7 messages

2. If FHIR code is NOT 200 or 201, HealthConnect keep suspend the HL7 messages in the messages queue, then keep processing NEXT subsequent HL7 messages in the TEXT file if the FHIR code is 200 or 201

3. I am also using following "Reply Code Actions" in Operation settings (:?R=S,:?E=S,:~=S,:?A=C,:*=S,:I?=W,:T?=C)

Please advice if I have a "if condition check" for FHIR codes 200 or 201, what "Reply Code Actions" I should use?

Using a WSDL and the SOAP wizard I created a WebServiceClient, and Operation to send an encoded message to a Vendor. But the vendor is now sending back an HL7 in the SOAP response.

I tried updating the Operation to Extend EnsLib.HL7.Operation.ReplyStandard, but still use the EnsLib.SOAP.OutboundAdapter. When I did this it broke my Operation and would not compile with the following error...

ERROR #5478: Keyword signature error in osuwmc.Nutrition.HL7SoapOperation:Method:SendMessage, keyword 'method argument/s signature' must be 'EnsLib.HL7.Message,EnsLib.HL7.

Need to capture filename during BPL process, then set it to MSH-6 in the HL7 message.

Please advice, if this can be done.

Hey everyone.

As part of an ongoing mission to track down orphaned HL7 Messages in our integration engine, I have been digging into our environment to track down the causes.

Having looked at various posts here (including one of my own) there are a few scenarios that can create orphaned messages resulting in excessive disk space usage. These scenarios are generally:

1. Purging an environment with the option "Bodies Too" deselected
2. Code creating/saving a Message but then not sending it
3. BPL errors similar to 2, or a scenario where the response to a Call component is not set.

Is there any way of saving a representation of the results of a query created in the Message Viewer to a file - most obviously CSV.

We are reasonably adept at creating queries. We'd like to be able to send the output to a file, rather than resorting to cut'n'pasting from the message viewer window...

Is this possible? (on any version of Ensemble/Iris?)

Desired output to file something like:

ID,TimeCreated,Session,Status,Error,Source,Target,Body_MSH_MessageControlId,.....
1,8888888,2025-08-20 05:03:14.324,8438123,Completed,OK,ICE ADT Validator,ICE ADT TCP,1z123456,20220822......

Hello,
I am currently facing the task of retrieving or sending HL7 messages from a web API. Since we only send HL7 messages via internal sockets, web APIs are relatively new to me.
The following is my plan for the new interface:
I have created a new custom business service that periodically sends requests to a business process. In this business process, the HTTP request (HTTP.GenericMessage) is then created from scratch. The special feature is the "Authorisation" header field, where a signature is inserted, which consists of a base64-encoded hash value.

For historic reasons we've got a mix of ADT feeds coming out of our PAS (TrakCare) to a wide range of downstream systems. In particular, there are some that are direct from TrakCare to the downstream systems, and many more that pass through Ensemble as our integration engine.

This is complicating management of the integrations, and so we'd like everything to go through the integration engine.

Hello community,

is anybody located in the DACH area healthcare sector working with Dedalus Orbis as patient master and uses a custom HL7 schema for parsing Orbis message structures into Health Connect?

We're facing a migration and I ask myself if I have to create a schema by myself, based on the pdf documentation given by the company. This is a tedious task,  so hopefully there is somebody out there willing to share his or her experience.

Kind regards,

Martin 

Our vendor is developing an interface API on their end to capture HL7 data on a Server Port, and they require us to send a pre-defined HL7 Order message for testing every hour until the API is completely operational.

Is it possible to accomplish that in a Business Operation automatically without utilizing a service or process? The BO is a standard TCP/IP connection.

I'm manually sending the message again from the Operations right now. I do not have access to the System Operation to use the Task Manager feature.

Studio's Find In Files finds nothing if CLS routines are included. The error is WIDE CHAR. After using ##class(%Studio.Project).FindInFiles programmatically and then ZW after the same error I strongly suspect that CodeWalkopdatecopyopt in EnsLib.InteropTools.HL7.Cloverleaf.Parser.cls  is to blame. I cannot even open this class, unlike other classes from EnsLib.InteropTools.HL7. This error prevents searching even if System Items are excluded and I would peg EnsLib as System. Any remedy besides updating IRIS? Assuming this is fixed in later IRIS versions.

I have a need to create a specific Search Table outside of the EnsLib.HL7.SearchTable specifically for HL7 MFN messages in HealthShare Provider Directory.

Our Code is created in a different namespace then the main HSPD namespace and is mapped within the HSPD namespace mapping. 

I created a copy of EnsLib.HL7.SearchTable, named OSU.HL7.SearchTable what all needs mapped to make this new search table available in HSPD namespace?

If I go to Global within the Custom Code Namespace, I cannot see my new Search Table being created.

What am I missing to make sure that the OSU.HL7.

Hello,

I'm trying to get the Reply Action Code to work with the error message text.

I have this ACK:

MSH|^~\&|APP|FACIL|||20250821143621||ACK|CUEACK_20250821143621|P|2.4
MSA|AE||Failed to queue message

This is some of the Action Codes I've tried:

• E*Failed to queue message=S
• E*Failed=S
• E*"Failed to queue message"=S
• :E*Failed to queue message=S
• :?E*Failed to queue message=S

It's not suspending the message however.

What am I doing wrong?

Thank you

I have an application that is requires an Encoded HL7 message sent over SOAP over HTTPS using SSL/TLS... the Response that is return is also encoded, which I know how to Decode but not sure when I Decode the response how to Extract the HL7 message to send back to the router.

How do I capture the Routing Source System and parse the encoded message back into an HL7 format that would show on the trace viewer?

Below is an example...where I get the response and want to send it back to FeederScottRouting as an HL7 message that can be tied to the Parent ID of the sending request message?

We have a vendor that is requiring that the HL7 sent to them is sent as an Encoded message inside a SOAP request but is sending back an HL7 message as the response. 

When the WSDL built the response, it was expecting an encoded message back. I updated the Request and Business Operation to expect an EnsLib.HL7.Message, however I am not sure how to handle the HL7 ACK to post it back to the sending message so it will not cause an Orphan message, and to parse it back correctly in the trace viewer.

When I do a $$$LOGINFO on the pResponse, I get back...

I am having a hard time trying to figure out the following...

Within a DTC, I was able to take the a EnsLib.HL7.Message source and using

set$Systemset

to take the HL7 message encode it and add it to the Data Class as a string to be sent to an Operation to be sent out as a SOAP Request. 

However to make it more universal I tried doing this within a copy of EnsLib.HL7.SOAPOperation

Method SendMessage(pMsgOut 

I keep getting the following message from the SOAP response 

Does anyone have a query that I could run to show a Vendor the time difference between when a message was sent out a BO, and when we received the HL7 ACK back that is associated with the message sent?

I am trying to prove to this vendor of the delay we are seeing getting the ACK back because of a Timeout

I know how to pull Ens.MessageHeader, and EnsLib.HL7.Message but not sure how to match up the Message with the HL7 Acknowledgement received.

We are attempting to setup an EnsLib.SOAP.OutboundAdapter to send an HL7 message to a vendor hosted AWS site. We have the Certificate from the vendor and defined the TLS setting. However, when we are sending the message we are receiving...

Unable to open TCP/IP socket to server hcis-staging.cbord.com:443

So, we figured it might be a firewall issue. With the TCP Outbound Adapter, we could specify which "Local Interface" to use so that our firewall knew to use the VIP that had has been NAT'd. I don't see this option with the EnsLib.SOAP.

I have a question where I have over 30 000 records of data that I would like to send in HL7 and was looking at sending these in one bulk messages instead of individual messages in HL7.In this kind of a situation has anyone ever sent a bulk HL7 messages or is there a way of doing this other than using FHIR bundle.

Hi all,

My team is exploring options for handling timezone offsets in DTL and we’re wondering if there are any built-in methods available — ideally low-code or no-code solutions. Specifically, we're looking for a way to adjust timestamps based on the date and whether Daylight Saving Time (DST) is in effect.

For example, if an HL7 message has an MSH-7 value of 20250518144529, it should be converted to 20250518144529-0500 (Central Daylight Time), but if the timestamp were 20250218144529, it should be 20250218144529-0600 (Central Standard Time).