HealthShare

Syndicate content 56 

Often InterSystems technology architect team is asked about recommended storage arrays or storage technologies.  To provide this information to a wider audience as reference, a new series is started to provide some of the results we have encountered with various storage technologies.  As a general recommendation, all-flash storage is highly recommended with all InterSystems products to provide the lowest latency and predictable IOPS capabilities.

The first in the series was the most recently tested Netapp AFF A300 storage array.  This is middle-tier type storage array with several higher models above it.  This specific A300 model is capable of supporting a minimal configuration of only a few drives to hundreds of drives per HA pair, and also capable of being clustered with multiple controller pairs for tens of PB's of disk capacity and hundreds of thousands of IOPS or higher. 

+ 3   0 1
0

comments

1608

views

+ 3

rating

GraphQL is a standard for declaring data structures and methods of data access that serves as a middleware layer between the client and the server. If you’ve never heard about GraphQL, here is a couple of useful online resources: here, here and here.

In this article, I will tell you how you can use GraphQL in your projects based on InterSystems technologies.

Last comment 1 October 2019
+ 14   9 6
1145

views

+ 14

rating

Hi, 

We have a PAS that accepts HL7v2 QBP^Q21 requests, and returns patient details in an RSP^K21.

We have a clinical system that wants to sent an http GET request of the form http://server/getpatientbyid?pid=M1234567

So I think I need to convert the query url into a QBP^Q21 (HL7) message, then take the response in HL7v2, convert to SDA, convert to FHIR, and put that in the response to the  original GET.

Does anyone have any experience doing this? is there an approach you would recomend?

Last comment 19 April 2018
0   0 3
0

answers

628

views

0

rating

Continuing on with providing some examples of various storage technologies and their performance profiles, this time we looked at the growing trend of leveraging internal commodity-based server storage, specifically the new HPE Cloudline 3150 Gen10 AMD processor-based single socket servers with two 3.2TB Samsung  PM1725a NVMe drives.  

Last comment 29 October 2018
+ 4   0 2
558

views

+ 4

rating

Is there a way in the routing rule to compare two fields in two different segments? For example, for the message below we need to compare one Identifier in PID-3 (uiytr5678906^^^^CKS)against another in MRG-1 (uiytr5678A06^^^^CKS). Both will always have the same IdentifierTypeCode (PID-3.5/MRG-1.5), but the ID number can be different. Just to clarify, we only want to compare the CKS IdentifierID, not the entire field or all the identifiers in the MRG-1 or PID-3 field.

Last answer 11 January 2018 Last comment 2 February 2018
0   0 3
528

views

0

rating

On one HealthShare servers (RH Linux, 2017.1.1), I am not able to login to Studio for this server. When I select the server connection from the notification tray icon, choosing Remote System Access, Studio, then the server, the error I getting is:

Unable to log on to server {Server Name}

Communication link failure

I've tried using both DNS name and IP address, same result. Using Atelier, I am able to connect to the server using the same DNS name and Web Server Port that I'm trying in Studio.

Last answer 29 June 2018 Last comment 1 July 2018
0   0 4
519

views

0

rating

I already talked about GraphQL and the ways of using it in this article. Now I am going to tell you about the tasks I was facing and the results that I managed to achieve in the process of implementing GraphQL for InterSystems platforms.

What this article is about

  • Generation of an AST for a GraphQL request and its validation
  • Generation of documentation
  • Generation of a response in the JSON format
Last comment 5 September 2018
+ 4   1 1
516

views

+ 4

rating

Is there any good documentation/tutorials on creating gateways in both directions between FHIR and Hl7v2 (for Health Connect)?

the scenarios I'm most interested in

1. Client application sends a FHIR demographic query to Health Connect - and the interface has to convert this to Hl7v2 QBP^Q11 message to the PAS.

2. Health connect sends a PDF document (from a file or HL7v2 interface) to an EPR over FHIR.

Thanks

Stephen

UPDATE

Last answer 3 January 2019 Last comment 7 January 2019
0   1 3
433

views

0

rating

I am rather new to ObjectScript and I have a query about assigning values to the context.

In  BPL I have a context variable (A08Msg) which is set to type Enslib.HL7.Message, I want to put my inbound HL7 message into this variable so I tried:

  • an Assign to set context.A08Msg to request

This seemed to load the message into the variable because I could read values, e.g. using  context.A08Msg.{PD1:3(1).1} , but I was unable to write to context.A08Msg.

Last answer 12 April 2018 Last comment 12 April 2018
0   0 3
373

views

0

rating

I reached out to Gary Monger yesterday and asked him how he configured Apache for his SMART on FHIR demo?
See https://learning.intersystems.com/mod/page/view.php?id=2948.
Gary's response was for me to post my question on the Developer Community forum - so that other people can benefit from the answer.

This is what I asked Gary:

I'm after turning a local Health Share instance on my laptop into a SMART on FHIR server.

Last answer 19 January 2018 Last comment 19 January 2018
0   0 2
371

views

0

rating

My understanding is that IRIS is a new technology and does not replace Cache or Ensemble and to that end is more of a modernization than a repackaging. Is that accurate?

Is IRIS and HealthShare heavily penetrated in the payer space of primarily dominate in the provider space? What is the trajectory for InterSystems to penetrate the payer landscape?

Last answer 15 August 2018
+ 2   0 3
0

comments

338

views

+ 2

rating

Hi everyone,

I need submit a object have a json string as property of class, but I get an issue, object can't save to SQL table if I take json data to json property. I try making a test class with only json property and get the same issue, no data row in SQL table after run ClassMethod . Some one know what's problem, please help me. Here my test class:

Last answer 4 October 2018 Last comment 4 October 2018
+ 1   0 2
316

views

+ 1

rating

Hello guys,

I'm working on a Healthshare project . I am using a  patient message Flow for Inbound SDA Data in an Edge Gateway.

The patients are created , i manage to found them on the Patient search screen. However , when i request clinical data display on the clinical viewer, i do find the patient but no clinical data is visible on the clinical viewer, eventhough the SDA object exists on HS.Registry.Patient table .

So i checked the data flow , and i found that there is an error when the Edge Gateway Receives a Clinical Data Request : 

Last answer 23 February 2018 Last comment 23 February 2018
0   0 2
297

views

0

rating

Hi Everyone!

New video"SMART on FHIR: The Basics" is available now on  DC YouTube Channel:

 

0   0 0
0

comments

277

views

0

rating

I work for a large NHS Trust in the UK and we are using Healthshare and we process 1000s of messages each day.  Many of these are standard HL7 messages however for several months now we also pickup and drop off 1000s of PDF files.

We have our message purge set to 365 as we have to keep a years worth of messages as we have a retrieval and send process that enables us to replay any set of messages to any destination which we use to prepopulate end systems with activity and result history.

Last answer 26 July 2018 Last comment 27 July 2018
0   0 3
268

views

0

rating

Hello,

I'm wondering what the path is to learning healthshare & ensemble?   I've looked on the learning page and its minimally helpful.   I've found that as a long time mumps programmer that new jobs are requiring this.  I've just been using mumps to assist with epic emr.   Everything I'm seeing is either VistA or Healthshare.  Does someone know where do I go to learn these apps?  Seems like a catch 22.  You need to know these prior to getting a job but you can't get a job where you can learn them.    Frustrating.

Last answer 12 October 2018 Last comment 12 October 2018
0   0 3
256

views

0

rating

Hi all,

We have migrated our Ensemble instance from Healthshare 2016.2.1 to 2017.2.1, after all process we are checking that all namespaces are working propertly.

The first problema was checking a business operation that calls to a WebApi with the following error message:

Last answer 21 February 2018 Last comment 22 February 2018
0   0 2
256

views

0

rating