HealthShare

Syndicate content 56 

I'm able to log into my local instance of HealthShare through the Management Portal, but once I've done so, the screen is entirely blank. I'm still able to access Terminal and Studio without any issue, as well as a hosted instance's Management Portal. I've tried stopping and starting HealthShare, no luck. I've been working on this instance for the past several months and haven't experienced anything like this, and I don't know of anything that I was doing that would have broken the Management Portal. Anyone have a suggestion as to where to go from here?

Last answer 11 March 2019 Last comment 6 February 2019
0   0 2
150

views

0

rating

I am under the impression that inside HealthShare you can Services, Processes, and Operations. The service takes incoming data, the processes can process that data, and then the operations can send that data out.

 

I am curious if anyone has any experience, guides, or advice on how I can send data to a service using a Java application. I intend for the data to be in XML format. I am also curious if I succeed at picking up the data in the service, how I send the data back to the Java application using an Operation.

 

0   0 2
0

comments

108

views

0

rating

Hi all,

is it possible to omit the typical XML header line

<?xml version="1.0" encoding="ISO-8859-1" ?>

when writing an the contents of a EnsLib.EDI.XML.Document  using the above mentioned operation. I´ve already digged into the config value Format. It only states that:

C(e) : output an XML header line declaring character encoding e. If e is empty use the encoding defined by the Adapter. If e begins with ! force the output stream's encoding. Note that this will be applied automatically for File Operations configured with a non-UTF-8 Charset

Last answer 23 September 2019 Last comment 13 September 2019
0   0 3
100

views

0

rating

Hi ,

In HSBUS we have out of box operation HS.IHE.XDSb.Repository.Operations to route CCD's from HSBUS to Edge gateway.

Earlier it was working fine, but for maintenance we have to rest the DEV environment, Now its throwing below error. I have verified all registry configuration and the CCD feed is also same, nothing is changed except reset. Can someone help me, where to look for this problem or what I am missing here.

Last answer 31 May 2016 Last comment 27 May 2016
0   0 1
710

views

0

rating

Hello devs,

I'm facing an issue with one of my business services, which basically grabs a XML from a webservice (which in turn reads the data from the caché database) and does some processing afterwards. The XML content (which is formed of some of the table fields values) contains a special character: (left single quote)

Last answer 26 January 2017 Last comment 26 January 2017
0   0 3
656

views

0

rating

Hello everebody,

I'm begenning  with intersystems, and i woul like to customize  the screen patient Search psorposed by HealthShare,

i have to change the form   and delete some fields....

the name of the  standard page is 57772/csp/healthshare/hsaccess/HS.UI.PatientSearch.cls

if  someone can help me that's greet 

 

Last answer 11 September 2017
0   0 1
0

comments

183

views

0

rating

Newbie question. So bear with me please.

We have a requirement to extract or build a file off of our local db to feed to HealthShare.

The requirement is for us to create the extract and send it to HealthShare the SDA format.

My initial thought is why would you do that when the SDA is native to HS.  We could create a file in any format csv,tab etc let HS consume it, convert it to HL7 2.5.1 and then let HS do the work with the SDA.

However, the current direction is for us to query, get the data and map it to an xml file built off of the SDA.

Last answer 29 December 2017 Last comment 2 January 2018
0   0 2
648

views

0

rating

I am rather new to ObjectScript and I have a query about assigning values to the context.

In  BPL I have a context variable (A08Msg) which is set to type Enslib.HL7.Message, I want to put my inbound HL7 message into this variable so I tried:

  • an Assign to set context.A08Msg to request

This seemed to load the message into the variable because I could read values, e.g. using  context.A08Msg.{PD1:3(1).1} , but I was unable to write to context.A08Msg.

Last answer 12 April 2018 Last comment 12 April 2018
0   0 3
371

views

0

rating

On one HealthShare servers (RH Linux, 2017.1.1), I am not able to login to Studio for this server. When I select the server connection from the notification tray icon, choosing Remote System Access, Studio, then the server, the error I getting is:

Unable to log on to server {Server Name}

Communication link failure

I've tried using both DNS name and IP address, same result. Using Atelier, I am able to connect to the server using the same DNS name and Web Server Port that I'm trying in Studio.

Last answer 29 June 2018 Last comment 1 July 2018
0   0 4
516

views

0

rating

Hi,

I have a routing rule that calls some utility classmethods, but for some reason the compiled version insists on linking to a utility function in a different package.

The call to 'SendToEaling(HL7)' in  isn't compiling to a call to the LNWTIEPackage as expected:

##class(LNWTIEPackage.RoutingRules.Utility).SendToEaling((pContext.HL7))

but is instead becoming a call to the LNWDeploy package

Last answer 7 September 2018 Last comment 6 September 2018
0   1 2
151

views

0

rating

I am new to CCDs and I have a question for you all.

I need to take in a CCD from our EMR, filter out sensitive data then send it on as a CCD.

All feedback is appreciated.

Thanks

0   0 0
0

answers

0

comments

77

views

0

rating

Hi Community,

I have to make a daily task (Job) which will run (7 am to 7 pm) in a day at an interval of 3 hours. Timings are as (7:00 am, 10:00 am,13:00 pm,16:00 pm,19:00 pm). But at each time when task will run i have to set a variables as per below condition

Sample:

1) If task run at 2019-03-19 07:00 am in morning

I  have to set two variables (start and end) whose value will become like this

(set starttime= 2019-03-09 07:00:00.00 and set endtime=2019-03-09 10:00:00.00)

Last answer 9 March 2019 Last comment 9 March 2019
0   0 2
121

views

0

rating

Hello guys,

I have been playing around with the deployment tools from Ensemble (mostly based on this article https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KEY...) , but so far the one thing I still couldn't figure out is how to release the fact that I deleted files/components from my source production and that will get reflected in my target production.

Last answer 15 May 2019
0   0 2
0

comments

104

views

0

rating

Hi,

While HL7 Errors ACKs come back in the soap response, the HL7v2 Error ACK message is not processed. 

I used the SOAP Wizard to construct my classes, but the generated code doesn't handle the HL7v2 ACK.
Does health Connect have a class that handles this?

Failing an official solution should I go ahead and make make my own classes based on EnsLib.HL7.Operation.TCPOperation, but wrapping it with the generated SOAP handling code.

How have others dealt with this?

0   0 1
0

answers

0

comments

64

views

0

rating

Hi,

I'm trying to establish a communication between my edge, which is in one server, with my HUB which is in another one. 
In EDGE, when the HS.Gateway.HSWS.WebServices component sends a message to the HUB component, it receives the following error: "Cannot invoke method RegisterGateway; WebServiceClientClass 'HS.Hub.HSWS.WebServicesClient' could not be instantiated, or the WebServiceURL Location could not be determined".
 

May someone help me? 
 

0   0 1
0

answers

0

comments

51

views

0

rating

We have a program set up in the HealthShare Facility Registry. And we have some patients enrolled into this program. In the HealthShare Registry management, we set up following consent policy for this facility (we call it program), Default Block Except: Block data except for the groups specified below, unless overridden by patient. There is no program in the Selected Programs so the consent should be applied to everybody.

0   0 1
0

answers

0

comments

262

views

0

rating

Hello!

Checking to see if anyone has experience with deploying their Docker containers on a platform like OpenShift (or vanilla Kubernetes)?

If you have, do you have any guidance or lessons-learned?  Is this even something feasible with a HealthShare/Ensemble instance?

Last answer 7 September 2018 Last comment 1 days ago
0   0 3
201

views

0

rating

Our PAS system supplies date in a particular date format (ISO 8601 compliant) that includes seconds and milliseconds.  Because many downstream systems cannot handle milliseconds (and some don't even want seconds) many transformations are required to truncate the data.

Last answer 18 February 2019 Last comment 18 February 2019
0   0 2
132

views

0

rating