HealthShare

Syndicate content 54 

If your application is raising <PROTECT> errors and you're finding it hard to work out why, here's a way to get additional information.

First, if auditing is not already enabled, turn it on:

Then use "Configure System Events" (highlighted above) and locate the event named %System/%Security/Protect. In the screenshot below I used the Filter field to do this (type "protect" - highlighted below - and press TAB):

Last comment 24 April 2017
+ 4   0 3
695

views

+ 4

rating

Enterprise Monitor is a component of Ensemble and can help organizations monitor multiple productions running on different namespaces within the same instance or namespaces running on multiple instances.

Documentation can be found at:

http://docs.intersystems.com/ens20161/csp/docbook/DocBook.UI.Page.cls?KEY=EMONITOR_all#EMONITOR_enterprise

In Ensemble 2016.1 there were changes made to make this utility work with HealthShare environments.

This article will:

  • Show how to set up Enterprise Monitor for HealthShare sites
  • Show some features of Enterprise Monitor
  • Show some features of Enterprise Message Viewer

For this article, I used the following version of HealthShare:

Cache for Windows (x86-64) 2016.1 (Build 656U) Fri Mar 11 2016 17:42:42 EST [HealthShare Modules:Core:14.02.2415 + Linkage Engine:14.02.2415 + Patient Index:14.02.2415 + Clinical Viewer:14.02.2415 + Active Analytics:14.02.2415]

Last comment 26 August 2016
+ 7   0 3
692

views

+ 7

rating

Hi ,

In HSBUS we have out of box operation HS.IHE.XDSb.Repository.Operations to route CCD's from HSBUS to Edge gateway.

Earlier it was working fine, but for maintenance we have to rest the DEV environment, Now its throwing below error. I have verified all registry configuration and the CCD feed is also same, nothing is changed except reset. Can someone help me, where to look for this problem or what I am missing here.

Last answer 31 May 2016 Last comment 27 May 2016
0   0 1
659

views

0

rating

Hello,

How to get XML subtree from XPATH.DOMResult object as Stream or CacheString.

 

Here is my classmethod. My system receives XML message which has nested structures. The requirement is to send one message at a time to the destination. I have created the XPATH document and used EvaluateExpression method and which returns XML.XPATH.Result of type DOM. I am able to read the dom and get value of the element and its text. But I am looking to send back the subtree.

Code:

Last answer 19 July 2016 Last comment 19 July 2016
0   0 1
648

views

0

rating

Internally we use splunk for monitoring applications and network.

Does Ensemble have a way of exposing internal metrics and/or a way of exposing custom built metrics? 

I've used Deepsee dashboards in the past to monitor Apache Tomcat/Apache Camel/hawtio using JMX rest calls. This is the other way around and ideally I'd like to expose metrics on:

Last answer 12 December 2016 Last comment 3 January 2017
0   0 2
641

views

0

rating

Hi,

Can you please tell us how to create xsl file for CCD to SDA conversion using XSLT.

What will be the prerequisites.

I have tried to create an xsl file for the given xml given belowusing XSLT transform Wizrad:

<?xml version="1.0" ?>
<s1 title="s1 title attr">
  <s2 title="s2 title attr">
    <s3 title="s3 title attr">Content</s3>
  </s2>
</s1>

using the stylesheet below:

Last answer 28 June 2017
0   0 2
0

comments

627

views

0

rating

HealthShare uses a lot of XSLTs. These are used to convert IHE medical documents to SDA (internal HealthShare format) and back to IHE formats, to create summary reports, and to deal with IHE profiles (e.g., patient information query, document provide and register). Customers may customize the XSLTs to customize reports or for other reasons.

For debugging and development, it is very convenient to be able to run an XSLT from Terminal.

+ 8   0 3
0

comments

626

views

+ 8

rating

Hello devs,

I'm facing an issue with one of my business services, which basically grabs a XML from a webservice (which in turn reads the data from the caché database) and does some processing afterwards. The XML content (which is formed of some of the table fields values) contains a special character: (left single quote)

Last answer 26 January 2017 Last comment 26 January 2017
0   0 3
609

views

0

rating

I recently helped a site investigate a problem that appeared after they upgraded their Windows instance of Caché from 2015.1 to 2017.1. A terminal session launched from the server's desktop cube was unable to run OS-level commands using the $ZF(-1) function. For instance, using the no-op command "REM" as follows:

write $zf(-1,"rem")

was returning -1, indicating that the Windows command could not be issued.

Last comment 27 March 2018
+ 7   0 4
588

views

+ 7

rating

Newbie question. So bear with me please.

We have a requirement to extract or build a file off of our local db to feed to HealthShare.

The requirement is for us to create the extract and send it to HealthShare the SDA format.

My initial thought is why would you do that when the SDA is native to HS.  We could create a file in any format csv,tab etc let HS consume it, convert it to HL7 2.5.1 and then let HS do the work with the SDA.

However, the current direction is for us to query, get the data and map it to an xml file built off of the SDA.

Last answer 29 December 2017 Last comment 2 January 2018
0   0 2
570

views

0

rating

Hi, 

We have a PAS that accepts HL7v2 QBP^Q21 requests, and returns patient details in an RSP^K21.

We have a clinical system that wants to sent an http GET request of the form http://server/getpatientbyid?pid=M1234567

So I think I need to convert the query url into a QBP^Q21 (HL7) message, then take the response in HL7v2, convert to SDA, convert to FHIR, and put that in the response to the  original GET.

Does anyone have any experience doing this? is there an approach you would recomend?

Last comment 19 April 2018
0   0 3
0

answers

545

views

0

rating

 

1. Scope and Objective:

 

Recently we supported a few NHS cases that required TIE (Trust Integration Engine) integration with the PKB service.   Hence this article is meant to be a 10-minute quick guide to describe a demo solution (simple configurations and end-2-end implementation steps) for Health Connect (Ensemble) Integration with PKB (Patient-Knows-Best) service.

+ 5   0 1
0

comments

535

views

+ 5

rating

Hi, 

I am a beginner on intersystems technologies ! and i want implements Oauth2 for our projects ( Angular 2 + Caché REST  Backend). 

i read the article that the link  is below : 

https://community.intersystems.com/post/cach%C3%A9-open-authorization-framework-oauth-20-implementation-part-1

But : i need to create  all servers ( Auth and Resource ) on Caché and dont' to use google server.

Last comment 26 September 2017
0   0 4
0

answers

504

views

0

rating

Our client is a test out of 2016.1 (Build 656U) Healthshare that wants to do a one way SSL connection to our Java 1.7/Tomcat 8.0 server.  We have yet to come up with a secure cipher set that Healthshare and Java agree on for the handshake.  So far we've had to use these ciphers identified which are not recommended (though it does do a handshake properly).

Last answer 2 March 2017
0   0 0
0

comments

502

views

0

rating

Suppose I have an image and need to convert that image into a PDF for inclusion in an HL7.

I know that Zen Reports can display an image in a PDF but I do not want to view the image in a web page. I just need to convert the image to PDF in a Process and then include that PDF in an HL7. The  workflow would be like this:

Get image -> Convert image into PDF -> Include PDF in HL7 OBX.

I know how to do the last part to include PDF in HL7 OBX. Just need ideas on the first part.

 

Last answer 8 May 2017 Last comment 8 May 2017
0   0 0
496

views

0

rating

I was just watching a video - Clinical Document Architecture and Document Creation - Videos An Introduction to CDA - from Australia (browser, Firefox). The video started and played fine for 8m 49s, then stopped with the following message: Could not download the video
Error code: PLAYER_ERR_TIMEOUT.

Last answer 21 September 2016 Last comment 21 September 2016
0   0 0
489

views

0

rating

Is there a way in the routing rule to compare two fields in two different segments? For example, for the message below we need to compare one Identifier in PID-3 (uiytr5678906^^^^CKS)against another in MRG-1 (uiytr5678A06^^^^CKS). Both will always have the same IdentifierTypeCode (PID-3.5/MRG-1.5), but the ID number can be different. Just to clarify, we only want to compare the CKS IdentifierID, not the entire field or all the identifiers in the MRG-1 or PID-3 field.

Last answer 11 January 2018 Last comment 2 February 2018
0   0 3
479

views

0

rating

HealthShare HealthConnect and Information Exchange version 15.03 support import transformations from C-CDA 2.1 to SDA. You can find these transforms in your installation's csp/xslt/SDA3 directory. For general information about import transforms, see "CDA Documents and XSL Transforms in HealthShare" in Overview of Health Connect.

Among the enhancements to import functionality added in connection with C-CDA 2.1 support is the ability to preprocess your C-CDA input files prior to the transformation done for import.

0   0 1
0

comments

472

views

0

rating

Continuing on with providing some examples of various storage technologies and their performance profiles, this time we looked at the growing trend of leveraging internal commodity-based server storage, specifically the new HPE Cloudline 3150 Gen10 AMD processor-based single socket servers with two 3.2TB Samsung  PM1725a NVMe drives.  

Last comment 29 October 2018
+ 4   0 2
467

views

+ 4

rating

Hello All,

   Having a recent project to create a FHIR repository, I want to know (as looking at the code) if HealthShare FHIR implementaton supports subscriptions?.  I know it records the subscriptions ok, BUT does it handle sending the subscription out (based on the tags) to an endpoint (i.e. when a new FHIR request commits data that would trigger the subscription) ?, I'm 50% it doesn't, but would rather find out for sure before shoe horning something in.

 

   Regards

 

Last answer 9 November 2016
+ 1   0 1
0

comments

463

views

+ 1

rating

I already talked about GraphQL and the ways of using it in this article. Now I am going to tell you about the tasks I was facing and the results that I managed to achieve in the process of implementing GraphQL for InterSystems platforms.

What this article is about

  • Generation of an AST for a GraphQL request and its validation
  • Generation of documentation
  • Generation of a response in the JSON format
Last comment 5 September 2018
+ 4   1 1
459

views

+ 4

rating

Hoping someone can help,

I have the "Sample FHIR Production" installed ( as described in the documentation) with the following Components:

Service: HS.Gateway.ECR.SDA3XMLFileService

Processes: HS.FHIR.FromSDA.DTL.Transaction.Process

Operations: HS.FHIR.Repository.Operations

Last answer 23 November 2016 Last comment 28 November 2016
0   0 1
457

views

0

rating

HI,

 

Has anyone implemented the NHS Care Connect profile in HealthShare and if so could you share the steps you took?

I am not looking to integrate it into the SDA model,  Just looking having the classes within HealthShare and then applying a DTL to convert to HL7 2.x

I was hoping i could just down load the profiles from git hub and import into Studio but it appears I need the XSD to do this, which are not available.

 

Cheers,

Jason

 

 

Last answer 14 September 2017 Last comment 6 March 2018
0   0 3
447

views

0

rating