HealthShare

Syndicate content 56 

Often InterSystems technology architect team is asked about recommended storage arrays or storage technologies.  To provide this information to a wider audience as reference, a new series is started to provide some of the results we have encountered with various storage technologies.  As a general recommendation, all-flash storage is highly recommended with all InterSystems products to provide the lowest latency and predictable IOPS capabilities.

The first in the series was the most recently tested Netapp AFF A300 storage array.  This is middle-tier type storage array with several higher models above it.  This specific A300 model is capable of supporting a minimal configuration of only a few drives to hundreds of drives per HA pair, and also capable of being clustered with multiple controller pairs for tens of PB's of disk capacity and hundreds of thousands of IOPS or higher. 

+ 3   0 1
0

comments

1534

views

+ 3

rating

GraphQL is a standard for declaring data structures and methods of data access that serves as a middleware layer between the client and the server. If you’ve never heard about GraphQL, here is a couple of useful online resources: here, here and here.

In this article, I will tell you how you can use GraphQL in your projects based on InterSystems technologies.

Last comment 1 October 2019
+ 14   9 6
1085

views

+ 14

rating

Continuing on with providing some examples of various storage technologies and their performance profiles, this time we looked at the growing trend of leveraging internal commodity-based server storage, specifically the new HPE Cloudline 3150 Gen10 AMD processor-based single socket servers with two 3.2TB Samsung  PM1725a NVMe drives.  

Last comment 29 October 2018
+ 4   0 2
531

views

+ 4

rating

I already talked about GraphQL and the ways of using it in this article. Now I am going to tell you about the tasks I was facing and the results that I managed to achieve in the process of implementing GraphQL for InterSystems platforms.

What this article is about

  • Generation of an AST for a GraphQL request and its validation
  • Generation of documentation
  • Generation of a response in the JSON format
Last comment 5 September 2018
+ 4   1 1
496

views

+ 4

rating