New post

#HealthShare

30

InterSystems HealthShare is a healthcare informatics platform for hospitals, integrated delivery networks (IDNs) and regional and national health information exchanges (HIE). HealthShare includes health information exchange, data aggregation, workflow, text analysis, and analytics technology.

Learn more

Hi I want to utilise the file adaptor to pick up some PDF documents however I must not delete the source files from the server. I can see that there is a setting in the FTP adaptor to not delete from server but not in the file adaptor. Is there an easy way to do this or do I just need to create a custom adaptor that copies the files to a working location and records in a tracking global when I have done this so that I don't process the same file twice?

1 5
0 283

Hi Team,

Is there any way to disable all operation ( or services) in a production entirely?

For example when restoring from one HealthShare environment to another we may need to get the configs (IP, port, ssl etc ) updated before staring the operation. We set the production autostart to disabled but still need to disable the operation one by one if we want to start production without operations enabled.

Thank you for your help.

1 4
0 38

Hi All,

If I remember it correctly there is a functionality in IRIS to make this possible.

I've got two incoming Business Services of files from different sources.

BS1: An Ens.StreamContainer with some info and metadata which point to a specific file. Ens.StreamContainer will be send to a BP.

BS2: The files where the metadata points to. It's in the Ens.StreamContainer

But dependent on the flow the file could be later available on BS2. So I want the BPL to wait for the file to arrive at BS2.

0 4
0 142
Question
· Nov 20, 2023
HL7 field for base64 in orl

Hi everyone,

It could be great if some of you have had experience in hl7 v2 messages. The question is about FHIR to hl7 v2.5 conversion. I have to translate a binary resource, encoded in base64 into an orl_o22 message. Do you have advices? Which field could be used for that datatype?
I have found some implementation using nte segment but it is limited in characters.

Thank you

0 5
0 172

I'm trying to change the Stream property inside a DTL with a Source Class of Ens.StreamContainer. The code, below, will change it within the DTL testing tool, but running an actual message through the Production's Process doesn't change the Stream property. I can change other properties of Ens.StreamContainer by using the normal Set action and it is reflected when running it through the Process. For context, this uses a FTP service to grab a file. Any thoughts on why I can't just write modified stream data to the Stream property?

0 7
0 67
Question
· Aug 9, 2023
Reports roadmap

We are about to embark on a development where we'll be taking HL7 messages and generating PDF reports from them. We are wanting to future proof our development efforts within the constraints of our currently deployed platform and future upgrade options. We are currently running on Ensemble 2018, though an upgrade to Iris is anticipated - at some indeterminate point in the future. We are aware of Zen Reports and InterSystems Reports (Logi) as technology options, but are also unclear on some details. A roadmap and guidance from those who've done this kind of thing before would be great!

0 3
0 126

Hello!

I'm currently trying to setup a SFTP Ensemble production to handle all of my SFTP transactions. It's been going well, but I'm currently running into an issue where it is saying it is unable to exchange encryption keys. Error Below:

Unable to exchange encryption keys [80101005] at Session.cpp:238,0' matched ReplyCodeAction 1 : 'E=R' resulting in Action code R

Any advice on getting around this would be appreciated.

0 3
0 189

Hey everyone,

I'm currently running into a very weird issue to where I am trying to connect with a 64 bit version of SQL Server Management Studio (SSMS) to a HealthShare instance. I have created a System DSN using the Drivers (image below) that were downloaded with the Client version of the install and I'm able to successfully connect using my credentials.

0 2
0 57

Hello everyone,

I am looking for a sort of REST interoperability adapter that can forward REST calls within HealthConnect. If necessary, we need to adjust the requests or responses.

For Fhir calls, we use the FHIR Interoperability Adapter. This works perfectly; a message comes in as HS.FHIRServer.Interop.Request, and a message HS.FHIRServer.Interop.Response goes out. I can make adjustments as needed to both the request and response. I am looking for the same functionality, but then for non-FHIR REST calls.

0 2
0 136

Good morning,

Thank you for taking the time to read, understand, and answer this question.

If you needed to convert a message where questions are separated by "|", and the question text is the portion before the ":" and the response is the portion after the ":"; Which way would be the most readable and understandable for other developers?

Input example:

NAME OF SQUAD 1?:ALPHA|NAME OF SQUAD 2?:BRAVO|NAME OF SQUAD 2?:ANSWER THREE||NAME OF SQUAD 25?:YANKEE|NAME OF SQUAD 26?:ZULU

Output structure:

0 2
0 98
Question
· Nov 30, 2023
Multitransformations of HL7

This question originally appeared in the comments of the post: Making use of Multiple Sub Transforms in a main map || HL7

I'm having a similar problem trying to get PRD(1) into PV1:ReferingDoctor and PRD(2) into PV1:ConsultingDoc

Running the subtransform will populate referring doctor for the first PRD, and then the second running will delete the PV1, make a new one with only the consulting doctor populated.

0 1
0 113

Good morning:


Thank you very much for reading the doubt and above all thank you very much for answering.

Given the following use case:

If we have a Destination Service that through a HTTP GET by REST gives us a certain JSON response, where it should be noted that it is a list of objects where each object in the list does NOT have a key:

0 3
0 199

Hello everyone!
I need to build something that will receive a REST request. As of now I have tried my luck with using an EnsLib.HTTP.InboundAdapter. But i am not so sure how I am supposed to configure it to be able to receive the REST request together with the JSON body.
I have specified the OnProcessInput in the adapter so that it receives a GlobalCharacterStream. However, I have not had any good luck finding out to actually make the request to the EnsLib.HTTP.InboundAdapter.

0 8
0 213
Question
· Dec 4, 2023
Custom Application Metric

I made a custom application metric, imported it to the USER namespace and used:

set status = ##class(SYS.Monitor.SAM.Config).Add.ApplicationClass("historymonitor.errorSensor", "USER")

to add it. When I do 'w status' it returns 1 so it is added but I still can't see the custom metric in the api/monitor/metrics endpoint. Even though I added %DB_USER in the application roles for api/monitor.

Does anyone know where the problem might be that the metrics endpoint still doesn't show my metric?

0 1
0 108

In over a decade of using Ensemble/HealthShare, we have been able to use a single message type (doc type) for all HL7 ADT event types. We now have an application for which the HL7 segment sequence is different for A03s than it is for other ADT event types. The content of the segments is the same across event types; only the segment sequence differs. The data transformation has to do some custom logic, so we can't just use the "copy" variety of the transformation Create property.

0 3
0 199

I need to run a SQL query and use the output to map PV1 7.1. The query is :

SELECT ID
FROM TestTable
WHERE ProviderName = 'TEST,PROVIDER' AND IDType= 'BPI'

When I run this query with the 'TEST PROVIDER' I do pull the ID in question but I can't figure out how to do it from the DTL given that there are various providers sent in PV 1 7 . Any assistance will be greatly appreciated.

0 8
0 262

Hello everyone,

Is there a way to prettify the JSON streams in the incoming HTTP messages so that they are more readable in Visual Trace?

The HTTP messages sent by many software aren't prettified and are displayed like this in the Visual Trace:

On the other hand, other software like Postman prettify the messages and they are displayed in this way:

0 3
0 185

First of all, thanks for your help, and time reading this question.

Why, when we send a SOAP message from SoapUI to a SOAP service in a HealthShare environment called 'ESBCHUIMI,' it recognizes the 'Credenciales' header, which has 'usuario' and 'password' as properties. This class is a %SOAP.Header.

However, when we load the WSDL using the SOAP wizard from this SOAP Service to another HealthShare environment called ESBSSCC and send it from SoapUI to ESBSSCC, when it is being forwarded from ESBSSCC to ESBCHUIMI, the ESBCHUIMI's service outputs:

0 5
0 83