New post

#Ensemble

37

InterSystems Ensemble is a complete and easy-to-use integration platform that enables users to connect people, processes, and applications in record

time.

Learn more

Documentation

Hi All,

I am trying to create a production from a script(routine).

I am using the below way to create an empty production

Set oProd=##class(Ens.Config.Production).%New()
Set oProd.Name="Test.NewProduction"
Set oProd.ActorPoolSize=1
Set status=oProd.%Save()

But when i tried to start the production, i am getting an error as "Test.NewProduction" class does not exists.

Is there any other way to create the production via routine or terminal using commands as above?

0 6
1 620

Hello

I am writing a simple routing interface that picks up files from a share using File.InboundAdapter.

I am then using PassthroughService and passing it to a router.

The Router is using Ens.StreamContainer to then get the filename. I have then used contains to pick out part of the filename.

and then pass it to another simple passthrough operation to another share.

0 9
0 1.1K

We are trying to script a High Availability Shutdown/Start script in case we need to fail over to one of our other servers we can be back up within mins. Is there a way to configure the startup procedure to Automatically Stop/Start the JDBC server when shutting down or starting up cache? is there an auto setting we can change?

Thanks

Scott Roth

The Ohio State University Wexner Medical Center

0 10
0 669
Question
· Jan 25, 2018
List of Business Services

Is there a way to get the list of Business Services from a command line call? We are trying to see if there is a way we can automate bring down our Inbound Business Services during a fail over.

Thanks

Scott Roth

The Ohio State University Wexner Medical Center

0 12
0 713

I was able to run the Cache terminal from the command prompt with the following command, in the namespace that I provided in the brackets:

cterm /console=cn_ap:ENSEMBLE[TEST_1]

But the command suddenly stopped opening the terminal in the correct namespace. It just opens it in the default namespace. I tried it with different namespaces or invalid namespaces, it always opens the terminal in the default namespace now.

I cannot figure out what is causing this behaviour.

0 5
0 1.1K

I am using SQL Outbound adapter and inserting a HL 7 Message by executing a stored procedure and getting an error

ERROR #6022: Gateway failed: Execute.
+
ERROR <Ens>ErrGeneral: SQLState: (22001) NativeError: [0] Message: [Microsoft][ODBC SQL Server Driver]String data, right truncation

The reason i found is that segment delimiter is causing an issue and following is sample code

0 9
0 767

Hi, guys,

I've written a DT for a partner which transfers a csv file into SDA3.

I', using record map to gather data from a folder storing csv files and using the DT to tranfer the records into sda3 entities.

The followings are the codes of that DT:

Class POC.DT.CSV2SDA3 Extends Ens.DataTransformDTL [ DependsOn = (User.PhysicalExam.Record, POC.SDA.Container) ]

{

Parameter IGNOREMISSINGSOURCE = 1;

Parameter REPORTERRORS = 1;

Parameter TREATEMPTYREPEATINGFIELDASNULL = 0;

0 1
0 322

Hi

we are trying to call a Webservice that is hosted on a Ensemble production from a .net program.

The web application in ensabmle is defined with password authntication

we can't get to set the security header in the .net program (<soapenv:Header> ... <wsse:Security ... <wsse:UsernameToken ... ) in SoapUI we added the Wss usertoken and it worked like a charm.

Doe's anyone have a idea to guide us? (links, ,samples, etc. )

Thanks

Gadi

0 1
0 274

Hi,

I have very recently started to work with Ensemble and have both the 2014 and the 2017 version.

To learn, I have created a small test flow that takes an xml file using EnsLib.EDI.XML.Service.FileService, sends it to a Process that transforms it with xslt into another format, and then passes it onwards to a EnsLib.EDI.XML.Operation.FileOperation Business Operation.

This is the code that I have before and when sending it onwards:

0 2
0 843

Hi,

I am using a standard EnsLib.HL7.Operation.FileOperation to create files based on HL7 messages but I just realised that lines in the output file only contain CR (Character Return) but no LF (Line Feed). It is really important to have both as another system picking those files will fail otherwise...

Is there any way to configure this?

Thanks

1 4
1 932

I'm looking for a way to get the message header ID for the current message in a Request to a Business Process.

I've located some code that gives me what I need, but it runs the risk of violating the "abstraction layer" ISC has in place around such things. And while I very much appreciate their efforts at keeping things simple for me ... well, sometimes you just have to dig through the guts to get what you want.

Is there a documented, deprecation-resistant method for getting at %Ensemble("%Process").%PrimaryRequestHeader.%Id() from within a BP?

0 6
0 827

I would like to examine the contents of my OBX-5 field and not route the message if it contains alphabetic characters. I've tried various combinations of the Match and Contains functions, with no luck. Should I be using the COS ? operator or plaini regular expressions?

e.g.

OBX-5 Contains "\D"

OBX-5 Contains "?.A"

OBX-5 Contains "[A-Z]"

0 17
0 1.3K
Question
· Feb 21, 2018
HL7 segment query using SQL

I'm trying to get a count of specific message type with a specific entry and thought I could build the query in Message Viewer but this does not provide counts (as far as I am aware). So when I take the SQL from 'Show Query' it omits the segment criteria as the code shows below.

I have attached the criteria that has been excluded. Is this possible?

Thank you

0 2
0 1.4K

I have created a fairly simple process for taking a HL7 message and sending it to an external provider via a HTTP Post and this is all working correctly. However for the request and response messages I am using e a simple structure containing only a message stream and when looking in Ensemble Message viewer none of this stream content is showing (it is all blank). Would I have to create a particular message type to make this show in message viewer and if so could someone provide some guidance around how to achieve this (outline of code included below)

0 2
0 942

Hi,

I have a business service that needs to run only once a day at an specific time. It is important that the service only runs once.

I have tried the scheduler but you can only define the times (start-stop) when the service will be running...so this will not work for me as I need this to run only once.

Looking at the documentation I found "tasks". Apparently this is exactly what I need. As per documentation:

0 12
0 1.8K

Hi,

The Ensemble SQL Inbound Adapter executes a user defined query, and calls the OnProcessInput method of the Business Service with information about an individual row of the executed query.

If the query provided by the user (and executed by the adapter), returned multiple rows, then, OnProcessInput is called multiple times, once for each row.

Within the OnProcessInput method, however, is there a way to know that the row that is currently being processed is actually the last row of the query.

Thanks

Steve

0 7
0 517

Hello.

I want to grant access only to the Message Viewer page to an specific user, in all Namespaces. I have created a rol with this privileges:

%Ens_MessageContent
%Ens_MessageHeader
%Ens_MessageTrace
%Ens_Portal

But if I want to see the list of messages, I have to grant SELECT access to the Ens.MessageHeader and Ens.MessageBody tables of each Namespace.

Is there anyway to grant access to this tables in all Namespaces at a time, even if new ones are created?

Thank you in advance.

0 2
0 373

Hi,

I am sending a request message to Business Process which has one property as Dynamic Object type. So i get the JSON in my REST service and convert that as a dynamic object and set that in the request message and calling the business process from the business service. But the request is not getting sent to the Business Process. Is it possible to send dynamic object input to the business process.

0 18
0 846

Hi All,

Just wondering if anyone had got this working.

In the documentation it says to set the username and password properties of the connection object but these properties don't exist and without authentication I can't connect to the MQ queue.

Any help would be greatly appreciated,

Dave Moss

0 4
0 342

Hi,

I have a global that holds users name and date of birth.

I would like to loop through them and check if the date of birth is more than 2 years based on todays date

so I have ^checker("under2", "Eric David", "02-05-2018")

I want to check the birthdate based on todays date to see if it is greater than 2. How do I access the birthdate in the global

Please can you advice

I tried :

0 9
0 1.2K