New post

#Business Service

4

A business service is part of InterSystems Ensemble interoperability production which is responsible for accepting requests from external applications.

Hello,

We wonder how could we send an HL7 message to a service to test it.

For example, we have a service, at localhost port 19111

We have tried to use SoapUI to send a REST POST request as follows:

At the event log we see the following trace:

Then, if we try with POSTMAN as follows:

0 3
0 3.1K

Hi,

I have a business service that needs to run only once a day at an specific time. It is important that the service only runs once.

I have tried the scheduler but you can only define the times (start-stop) when the service will be running...so this will not work for me as I need this to run only once.

Looking at the documentation I found "tasks". Apparently this is exactly what I need. As per documentation:

0 12
0 1.9K

I have built an Ensemble SOAP service (EnsLib.SoapService.Service) as a business service which accepts soap requests from another application. To secure the traffic between the SOAP service and the application i'd like to enable SSL. I see that in the management portal I can upload the certificates, chains and keys and save them as an SSL / TLS configuration. However, it is not clear to me how I apply this SSL / TLS configurtion to the soap service I am running.

0 2
0 1.7K
Question
· Mar 31, 2017
Troubleshooting Disconnects

One of our Departments are claiming that we are loosing HL7 messages that are sent from their Vendor's system to Ensemble.

I know interfaces 101 if we have no record of the message then we never received it, however they are insisting they are sending it.

I asked them to provide the ACK's if they sent the messages but Ensemble had no corresponding Message Control ID (MSH.10) .

Currently I have the following settings...

0 2
0 1.7K

Hi ,

I'm using standard business service not(Customized business service). I'm not able to process the Hl7 data file which contains CRLF characters.It shows warning "Discarding Received non HL7 data". Actually it discards some segment after CRLF character. Is there any settings to overcome this problem?

Also i tried UTF-8, Ascii,Unicode.. characterset . But it won't work. Please help me .

Urgent!!!

0 11
0 1.6K

Problem:

A file-based business service uses a local path on a Linux machine that is actually a mounted CIFS share. The mount is "soft" and is designed to not cache data, etc. There are times however when the remote system offering up the share (it's a Windows machine I believe) gets bounced or otherwise hung up the business service in the Ensemble production just hangs.

0 4
0 1.6K

Hello Everyone,

I have a healthshare web application with production, I try to make a field in basic setting of business service, and I would like to set a string to DISPLAYLIST and VALUELIST of that Property (string maked by query to sql table). I code the same here but it's syntax incorrect in DISPLAYLIST = GetTypeDisplay(), VALUELIST = GetTypeValue(). Someone know a best way to solved my problem? Thanks so much!

0 8
0 1.5K
Question
· May 18, 2016
Ensemble HTTP OnProcessInput

I am just trying to make a quick hand off HTTP production. I have the class built and compiled onto the server and the production is running as a service. When the production is called (by an inbound job) I can see that the HTTP.InboundAdapter is being used successfully and the stack continues all the up to ProcessInput where OnProcessInput is called in Ens.BusinessService.

0 15
0 1.4K

Hello,

Why I don't see the full content of a XML file inside a Ens.StreamContainer Message?

When I look into the content I only see:

<?xml version="1.0" ?><!-- type: Ens.StreamContainer  id: 5 -->
<StreamContainer><OriginalFilename>C:\Temp\In\aa.xml</OriginalFilename><Stream></Stream><Type>FC</Type></StreamContainer>

How I can see all the content? There is any setting to modify this behavior?

I am using a EnsLib.File.PassthroughService,

Regards

0 1
0 1.1K

Hi Community,

I am receiving a JSON file as input in ensemble and i need to convert the JSON message to HL7 message.

Can anyone share few points how to read a JSON file into Ensemble production by creating a Custom Business service?

I have created a custom business service as below but i am not aware which parameters i need to pass in OnProcessInput method?

3 14
0 982

Hello everyone,

We have a process that is listening to an FTP service to collect some CSV files and process them. The process works correctly and when it ends it clears the directory waiting for it to enter some other file.

We have been receiving the following error message for a long time:

1 4
0 879

Hi,

In an Ensemble message bus that has a Business Service which extends EnsLib.SOAP.Service, I have the option to support SOAP Sessions by setting the parameter SOAPSESSION=1.

The comments says this also effects license consumption.

In what way is license consumption effected ?

note this is version 2015.1, Ensemble Elite (without Web-AddOn).

thanks -

Steve

0 7
0 854
Question
· Apr 4, 2019
Application ACK not working

I trying to get ACK back from the destination to the sending system.

I configured the Business Services to Ack Mode Application but sending system is getting Ensemble generated ACK [7] not destination ACK [9].

This is Ensemble 2018.1.1.312.0.

Ultimately I would like a NACK back when I have a Business Rule that blocks a messages from sending to Business Operations but currently [5] is an ACK |AA

0 5
0 784
Question
· Jan 25, 2018
List of Business Services

Is there a way to get the list of Business Services from a command line call? We are trying to see if there is a way we can automate bring down our Inbound Business Services during a fail over.

Thanks

Scott Roth

The Ohio State University Wexner Medical Center

0 12
0 780

Hi I'm hoping the community will once more help me out with a question!

Right I have a production that takes an attachment from an email and processes it, sending out a hl7 message at the end. This works ok.

Now I just need to take the email and send it back out to a 'backup' email address, basically giving
a) A backup incase there is a problem with the email or something else further down the line.
b) A log of the emails receieved.

So I thought the best thing to do is have an operation with an email adapter and to send that my message.

0 6
0 776

I have a service that that I would like to use to poll the database table in MySQL server 2012 and get an id to use if the condition is met but have trouble achieving this here is what I have so far any suggestions please.

Method OnProcessInput(pInput As EnsLib.SQL.Snapshot, Output pOutput As %RegisteredObject) As %Status
{
 
  set pRequest=##class(SamsReq).%New()
      set pRequest.pID=pInput.Get("pID")
     
     
 

< set sc=..SendRequestSync("DQTT",pRequest,.pOutput)

 quit sc
}

the error that I am getting

>}

0 4
0 766

I am currently working on a issue with WRC on one of my Inbound SQL Adapters not returning all the records it should be. If I looked at the count of the records in Ensemble and compare it to that of a Microsoft SQL View, Ensemble seems to be off by a few records here and there. I am using a full dynamic select statement in my settings of the adapter.

SELECT Text, PhysicianLastName, PhysicianFirstName, PhysicianAddress1, PhysicianAddress2, PhysicianCity,

0 5
0 757

What is the best way to create an HL7 message from JSON input file?

We have JSON file available with data required for building the HL7 message . I am trying to use a standard file/FTP Business service to pick up the file and convert the input %FileCharacterStream into a dynamic Object and use the stand JSON features to read /process the data and build the HL7 message.

Is there any other better way to do this? or any standard built-in functionality available in HealthShare?

Thanks you for your help

Mary

0 2
0 727