Hi all,

I'm trying to use LOAD DATA to insert 11k (11,377) rows of data. LOAD BULK DATA is not available for the version of IRIS I am using.

After calling LOAD DATA it says only 5,500 rows has been inserted. The LOAD DATA docs says any error rows are skipped and a count of skipped rows can be found in %SQL_Diag.Result however there are no results here. There are no errors in the xDBC error log either.

Why have over half the rows been skipped?

3 3
0 318
Question
· Jul 3, 2023
HL7 test message generator

I am looking for an appropriate solution to generate HL7 test messages to test my production. IRIS for Health already contains many HL7 specific functions like the schema structures. Furthermore one can use transformations to build custom messages.

What I am interested in is if anyone has already created a tool or script that can be used to create any HL7 messages that meet the minimum requirements and populate all the required fields with test values. I would then like to send these test messages via TCP to a business service.

3 11
2 800

we are looking at replacing our VMS system with Linux :-( yes a sad day!

now the question has become should we go with Intel or AMD. personally I think Intel is the way to go for several reasons.

has anyone seen or heard of an AMD being slower or there is a definite performance of one over the other.

thanks for your feedback.

Paul

first our current environment which will be copied over to the new platform

3 5
0 101

Hi All

I have a question on working with dev and prod environments.

After project is ready and signed, I usually migrate outcome to production using the export tool from the studio.

For changes/adding to existing projects, I exclude the production class (as it has some different values differing the dev from the live) and I add the differences manually afterwards.

My questions on migrating are:

Does anyone has (to share) his/her best practice steps on "migrating dev to prod"?

2 2
0 453

Hi colleages!

This is very easy to setup a FHIR server in InterSystems IRIS for Health.

It could be even one IPM command with this package:

USER>zpm "install fhir-server"

But which FHIR portal could you recommend to use?

I used to work with this one, which is very easy to install too:

USER>zpm "install fhir-portal"

but it doesn't work at the moment and I'm not sure if its main contributors @José Pereira and @Henrique Dias plan to support it.

What do you use? What do you recommend? Ideally installable with IPM package manager. Thanks!

2 3
0 160
Question
· Dec 15, 2022
Installation Manifest

I am trying to make application deployable using Installation Manifest.

I use IRISHealth_Community-2022.2.0.368.0-win_x64.exe to run manifest during installation

I run it from windows command line using the following command:

IRISHealth_Community-2022.2.0.368.0-win_x64.exe INSTALLERMANIFEST="C:\FixxerInstall\src\Installer.xml" INSTALLERMANIFESTLOGFILE="Log.txt" INSTALLERMANIFESTLOGLEVEL=3 INSTALLERMANIFESTPARAMS="FlaggerCSPDir=C:\FixxerInstall\src\csp\flagger,ClassImportDir=C:\FixxerInstall\src\import\"

It works but a little bit strange.

1 4
0 306

Our ERP solution runs on different sql databases (such as ms sql and posgre). We are using the same code for all plattforms, doing database-specific changes in the db driver for each type of database.

There is one function in our program, where the user can store long text to discribe something, which is used in print and web. This text is treated/stored as html and can include pictures. The pictures in the html are stored base64 coded inside the html and the html is stored as text in a column. In other database systems, this is treated as TEXT or BLOB, and workings just fine.

1 6
0 255

Hi folks!

Those who actively use unittests with ObjectScript know that they are methods of instance but not classmethods.

Sometimes this is not very convenient. What I do now if I face that some test method fails I COPY(!) this method somewhere else as classmethod and run/debug it.

Is there a handy way to call the particular unittest method in terminal? And what is more important, a handy way to debug the test method?

Why do we have unittest methods as instance methods?

1 25
0 419

How to understand what's wrong with compilation if the compilator just hides errors?

Compilation started on 05/15/2023 15:58:11 with qualifiers 'cuk'

Detected 1 errors during compilation in 0.003s.


Compilation started on 05/15/2023 15:58:32 with qualifiers 'cuk'

Detected 1 errors during compilation in 0.002s.


Compilation started on 05/15/2023 15:58:51 with qualifiers 'cuk'

Detected 40 errors during compilation in 0.089s.

40 errors, and what do I have to do with this so valuable information?

1 10
0 241
Question
· Jun 17, 2023
Hide or make routines binary?

Sorry, somewhat of novice here, but how is a mac or a routine created into a binary or is there a way to hide your routines so that no other user can edit them? Like remove source code and have an executable?

I would like to do this MAC and CSP pages

1 8
0 353
Question
· Jul 12, 2023
Enabling telnet

Can %Service_telnet be enabled programmatically? I have the need to enable this feature so that I can automate a script I have for Cache, but unless the telnet service is on, the session cant connect.

1 6
1 285
Question
· Mar 3
base64 data to pdf

hi there , when i convert a pdf to base64 data, and then restore the data to pdf,i find that ,i must read the same as length of base64 data every time convert ,or i can't get the right pdf. the code is:

1 3
0 116
Question
· Nov 15, 2023
SMS Texting solutions

I'm looking for an SMS Texting solution that will implement easily with IRIS. Our company uses Twilio for our .Net applications but I'm hoping there might be something else available. If anyone has experience with this please let me know!

Best,

Jerry

1 4
1 157
Question
· Jul 13, 2023
$zu(96,9) Not working

Suppose you have routine ^A loaded in your partition in programmer mode and you call routine ^B. Routine ^B finds the value of $ZU(96,9) which should be the calling routine.

But $ZU(96,9) now returns null, as does $SYSTEM.Process.CallingRoutine()

Works on 2018.1.7 but not 2018.1.8

$ROLES= %All on both systems

More precisely I have line label ZZPP in ^%ZLANGC00 which needs to identify the original routine in the partition and do some work on it. When I type ZZPP I get nothing on the later version. Here's the line of code:

1 4
0 201

I am trying to execute a program from within cache using a $zf call

S X=$ZF(-1,"C:\""Program Files (x86)""\Car-Part\Messaging\iCPM.exe")

For the sake of this post I changed it to open notepad

S X=$ZF(-1,"C:\Windows\notepad.exe")

If I call it directly from terminal notepad opens and all is happy.

If I add it to a program we use to run certain tasks once an hour or even every 10 minutes it will fire off notepad but it will be in the background.

1 2
1 199
Question
· Mar 19
Support for Java 17+

Any prevision when Java 17 or superior will be released?

Java 11 is not used any more, because vulnerabilities, security problems and new java resources not present in 11 version

1 3
0 86
Question
· Mar 13, 2023
IRIS Production - What it is?

Hi,

In some of the trakCare screens there is term "Production" shown [Interoperability->Production Configuration]
What is a production?

The production I'm looking at, is related to a Gateway.

What is a definition of a Gateway? How is this different to an Interface?

Under Gateway Production, there are "Services", "Processes", "Operations".

How are these defined to be?

I have 3 services, each with a green dot.

I have 3 processes , each with a green dot.

I have 5 operations, 4 of which has a green dot and one red dot.

1 7
0 375

s ftp=##class(%Net.FtpSession).%New()

s ok=ftp.Connect(server,user,password,port)
s ftp.Timeout = 100

i ok {

s ok=ftp.SetDirectory(directory)
i ok {
n files,file

s ok=ftp.NameList(directory,.files)
i ok {
f i=1:1:files.Count() {
s file=files.GetAt(i)
i (ftp.SetDirectory(file)) {
d ftp.SetToParentDirectory()
continue
}
s fname=$p(file,"/",$l(file,"/"))

1 1
1 173