It will demonstrate the wide range that is openend by making use
of the power embedded in Node.js and its adapter to Caché, Ensemble, Health,..*
Node / JavaScript have wide reputation to work as a WebSocket client.
By using the Caché adapter it becomes easy to control it and to consume the results as a
Client for WebSocket Servers and to collect the replies in Caché, Ensemble, ..

I used node-v6.16.0-x64.msi and cache610.node as cache.node

You provide a Global for input:

The typical WHERE condition in SQL relates mostly to some content of the rows you work on.
So it needs to be calculated and checked for each row you access.
Differently (and that's why I named it STATIC) is a WHERE condition that is independent of the rows you access.

In this article we are going to see how we can use the WhatsApp instant messaging service from InterSystems IRIS to send messages to different recipients. To do this we must create and configure an account in Meta and configure a Business Operation to send the messages we want.

Let's look at each of these steps in more detail.

Setting up an account on Meta

This is possibly the most complicated point of the entire configuration, since we will have to configure a series of accounts until we can have the messaging functionality.

Hi Community,

This post is a introduction of my open exchange iris-climate-change application.

iris-climate-change web application Imports The Food and Agriculture Organization (FAO) Climate Change dataset by using LOAD DATA (SQL) functionality and analyze and visualize data with the help of Python Flask Web Framework, Pandas Python data analysis Library, Plotly Open Source Graphing Library for Python and Plotly JavaScript Open Source Graphing Library.

New Tool Available

Please see PerfTools IO Test Suite for a later version of the Random Read IO tool.

Purpose

This tool is used to generate random read Input/Output (IO) from within the database. The goal of this tool is to drive as many jobs as possible to achieve target IOPS and ensure acceptable disk response times are sustained. Results gathered from the IO tests will vary from configuration to configuration based on the IO sub-system. Before running these tests ensure corresponding operating system and storage level monitoring are configured to capture IO performance metrics for later analysis.

Globals, these magic swords for storing data, have been around for a while, but not many people can use them efficiently or know about this super-weapon altogether.

If you use globals for tasks where they truly shine, the results may be amazing, either in terms of increased performance or dramatic simplification of the overall solution (1, 2).

Globals offer a special way of storing and processing data, which is completely different from SQL tables. They were first introduced in 1966 in the M(UMPS) programming language, which was initially used in medical databases. It is still used in the same way, but has also been adopted by some other industries where reliability and high performance are top priorities: finance, trading, etc.

Later M(UMPS) evolved into Caché ObjectScript (COS). COS was developed by InterSystems as a superset of M. The original language is still accepted by developers' community and alive in a few implementations. There are several signs of activity around the web: MUMPS Google group, Mumps User's group), effective ISO Standard, etc.

Modern global based DBMS supports transactions, journaling, replication, partitioning. It means that they can be used for building modern, reliable and fast distributed systems.

Globals do not restrict you to the boundaries of the relational model. They give you the freedom of creating data structures optimized for particular tasks. For many applications reasonable use of globals can be a real silver bullet offering speeds that developers of conventional relational applications can only dream of.

Globals as a method of storing data can be used in many modern programming languages, both high- and low-level. Therefore, this article will focus specifically on globals and not the language they once came from.

What is Journaling?

Journaling is a critical IRIS feature and a part of what makes IRIS a reliable database. While journaling is fundamental to IRIS, there are nuances, so I wrote this article to summarize (more briefly than our documentation which has all the details) what you need to know. I realize the irony of saying the 27 minute read is brief.

In this article, I will show you how one can easily create and read Microsoft Word documents using InterSystems IRIS with the leverage power of embedded Python.

Setup

First things first, let’s install the Python module called python-docx. There are a lot of modules to write MS Word files in Python. However, this one is the easiest one to use.

Just execute the following command on the terminal:

I'd like to share with you some storage features that also exist in Caché but are almost
unknown and mostly not used. They are of course available in IRIS and gain importance
with large and distributed storage architectures.

This should be an overview over a subject that pops up over several places in online documentation mostly as remarks and never as dedicated chapter.

Once upon a time ... No it's not a fairy tale.
In the beginning of Caché (and before) you had your partition to run your code. Part of that partition was a space with all your local variables nicely sorted by %,A,..Z,a,...z

Index

This is a list of all the posts in the Data Platforms’ capacity planning and performance series in order. Also a general list of my other posts. I will update as new posts in the series are added.

You will notice that I wrote some posts before IRIS was released and refer to Caché. I will revisit the posts over time, but in the meantime, Generally, the advice for configuration is the same for Caché and IRIS. Some command names may have changed; the most obvious example is that anywhere you see the ^pButtons command, you can replace it with ^SystemPerformance.

While some posts are updated to preserve links, others will be marked as strikethrough to indicate that the post is legacy. Generally, I will say, "See: some other post" if it is appropriate.

Capacity Planning and Performance Series

Generally, posts build on previous ones, but you can also just dive into subjects that look interesting.

• Part 1 - Getting started on the Journey, collecting metrics.
• Part 2 - Looking at the metrics we collected.
• Part 3 - Focus on CPU.
• Part 4 - Looking at memory.
• Part 5 - Monitoring with SNMP.
• Part 6 - Caché storage IO profile.
• Part 7 - ECP for performance, scalability and availability.
• Part 8 - Hyper-Converged Infrastructure Capacity and Performance Planning
• Part 9 - Caché VMware Best Practice Guide
• Part 10 - VM Backups and IRIS freeze/thaw scripts
• Part 11 - Virtualizing large databases - VMware cpu capacity planning

The base class Bmap.Person defines persons within an organization distributed
by various countries. All records are indexed by (Country, PersonalId).
this structure doesn't allow use of bitmaps.

So a wrapper class Bmap.PersonQ around the data eliminates the top level of
the index (Country) and isolates the PersonalId (%Integer, MINVAL=1).
We are ready to use a Bitmap index.

A few performance figures on 300010 generated records.
You see that Relative Cost are sometimes quite misleading.

base

Caché offers a number of methods for going through a collection and doing something with its elements. The easiest method uses a while-loop and lets you fulfill the task in an imperative manner. The developer needs to take care of the iterator, jumping to the next element and checking if the loop is within the collection.

As you know in Caché / IRIS you have the possibility to define a property as Multidimensional as documented here:
https://docs.intersystems.com/iris20201/csp/docbook/DocBook.UI.Page.cls?KEY=GOBJ_proplit#GOBJ_proplit_multidim
and the explanation of how to use it
https://docs.intersystems.com/iris20201/csp/docbook/Doc.View.cls?KEY=GOBJ_proplit#GOBJ_proplit_multidim_values

Though the access is quite comfortable (in traditional COS sense) there are 2 main restrictions that hurt:

#1) It is not saved to disk unless your application includes code to save it specifically.
#2) It cannot be stored in or exposed through SQL tables
there are some more
I'll show how to overcome these limits