Hi

I created a password validation routine for the management portal, which is called from the System-wide Security Parameters.
The validation process works correctly, but the error message that is displayed to the user when the entered password fails validation, consists of two separate error codes and messages

I see the following message when I click on my User at the top of the Management Portal screen (which then opens the popup window), to change my password and enter an invalid password:
ERROR #1446: Password change failed ERROR #5001: Password must contain at least one upper-case character

W

During a major version upgrade it is advisable to recompile the classes and routines of all your namespaces (see Major Version Post-Installation Tasks).

do $system.OBJ.CompileAllNamespaces("u")

do ##Class(%Routine).CompileAllNamespaces()

To automate this administration task and keep a log of any errors, below is an example of a class to import and compile into the USER namespace that you can use after each upgrade : admin.utils.cls

Class admin.utils
{
ClassMethod upgrade(verbose As %Boolean = 0) As %Status
{
set ns=$Namespace
// Stopping all

Your application is deployed and everything is running fine. Great, hi-five! Then out of the blue the phone starts to ring off the hook – it’s users complaining that the application is sometimes ‘slow’. But what does that mean? Sometimes? What tools do you have and what statistics should you be looking at to find and resolve this slowness? Is your system infrastructure up to the task of the user load? What infrastructure design questions should you have asked before you went into production? How can you capacity plan for new hardware with confidence and without over-spec'ing? How can you stop the phone ringing? How could you have stopped it ringing in the first place?

InterSystems Data Platforms and performance - Part 5 Monitoring with SNMP

In previous posts I have shown how it is possible to collect historical performance metrics using pButtons.I go to pButtons first because I know it is installed with every Data Platforms instance (Ensemble, Caché, …). However there are other ways to collect, process and display Caché performance metrics in real time either for simple monitoring or more importantly for much more sophisticated operational analytics and capacity planning.

Hello all, 

i am currently struggling following the instructions for reading an image file into the database as a base64 string.

My goal is to save an image into a global as base64. I followed different guides like:

https://community.intersystems.com/post/how-save-png-image-cache-base64…

https://community.intersystems.com/post/how-save-fileimage-some-specifi…

https://cedocs.intersystems.com/ens20152/csp/documatic/%25CSP.Documatic…

Here is my current code:

 N FILE,BASE64
 Set file=##class(%Stream.FileBin

Hi all,

I've just  update the version of WebTerminal using the link, but now it doesn't work.

When call to /terminal is displaying the following error:

{
    "errors":[ {
            "code":5002,
            "domain":"%ObjectErrors",
            "error":"ERROR #5002: Error de cache: <INVALID OREF>zWrite+5^WebTerminal.StaticContent.1",
            "id":"ObjectScriptError",
            "params":["<INVALID OREF>zWrite+5^WebTerminal.StaticContent.1"
            ]
        }
    ],
    "summary":"ERROR #5002: Error de cache: <INVALID OREF>zWrite+5^WebTerminal.StaticContent.1"
}

Anyone has

I'm getting wrapped around the axle with CAST and CONVERT and can't seem to find a way to do this (short of adding a stored procedure wrapping $zdt($zdth(posix,-2),3), which I'm refusing to do on principle, because there has to be some way to make this work).

Any ideas?

I am calling a stored procedure over an ODBC connection and every time I call it there are several warnings written to the log event {Found no Parameter 1 (used as 1) for query}.I seem to be getting this on every query executed and that seems to happen a number of times the query parameters are per query and its filling up my disc.

1) Is there a way to suppress these warnings as the query seems to be executed and data written to the database?

2) Is there a way to pass Null values to the procedure and not generate these warnings as I suspect there are caused by the Null values expected to

Mixing Object syntax with SQL is one of the nice features in Object Script. But in one case, it gave strange results, so I decided to isolate the case and describe it here.

Let's say you need to write a classmethod that updates a single property on disk. Usually, i would write that using SQL like this :

and call this

Is there a way to perform an %Prepare()/%Execute() that will wait until the record being queried is unlocked by another process? 

Ex: 

Process 1 - is opening record, updating, then saving. NOTE: this is using embedded SQL

&sql(SELECT %ID INTO :id FROMtable WHERE Prop=:prop)
s obj=##class(APPTRACKER.CacheHB.CustomEventCacheHB).%OpenId(eventId)
//updating record...s sc=obj.%Save()

Process 2 - is querying the same record while Process 1 has it open. Result is nothing is returned and %SQLCODE is 0

//simplified snippet with extra code removed
    ...
    s sql = ##class(%SQL.Statement).%New()

I want to display to the user on their Zen page how much time is left before their session times out.

I know I can set the %session.AppTimeout to a particular value (or manage this in the Web Application) and I know I can retrieve this value from the %session object. I also know that I can set an event handler to do something when the session has timed out but I cannot find any way to determine how long before the session ends via the application timeout so that I can keep the user informed.

I'm aware the session timeout triggers based on the inactivity of the user but I can't find anything

There are many ways to generate excel files using Intersystems, some of them are ZEN reports, IRIS reports ( Logi reports or formally known as JReports), or we can use third party Java libraries, the possibilities are almost endless.

But, what if you want to create a simple spreadsheet with only Caché ObjectScript? (no third party applications)

In my case i need to generate reports that contains large raw data (the financial guys love them), but my ZEN/IRIS fails, gives me, what i would like to call  a "zero byte file", basically says java ran out of memory, and causes heavy load on the

Hi, can anyone tell me how I should do the parameter calculation below in the MSM / MUMPS of Intersystems? STAP SIZE
STACK SIZE
MAX MODIFIED BUFFERS
DISK I / O RATE
SLICE COMMANDS
PARTITION SIZE
BUFFER POOL SIZE
NUMBER OF MUSERVER PROCESSES We have a rolling MSM that suffers from hangovers from the Activate service and the Workstation service several times a day and we are unable to determine if those hangouts are related to the number of users or overloading the system.

In this series of articles, I'd like to present and discuss several possible approaches toward software development with InterSystems technologies and GitLab. I will cover such topics as:

• Git 101
• Git flow (development process)
• GitLab installation
• GitLab Workflow
• Continuous Delivery
• GitLab installation and configuration
• GitLab CI/CD

In the first article, we covered Git basics, why a high-level understanding of Git concepts is important for modern software development, and how Git can be used to develop software.

In the second article, we covered GitLab Workflow - a complete software

Let's say I have two lists of connected data where elements of listTwo only make sense if given an item of listOne as context:

listOne = ["A", "B", "C"]

listTwo = ["x", "y", "z"]

Tuples like ("A", "y") and ("C, "x") make sense, but "A" or "x" by themselves don't. I would like to pass in a list of such tuples into a method and have it handle each tuple in the list. So what would be the best way to format them given that ObjectScript does not have specialized tuples? Would it be nested $LISTBUILD lists or something else?

Hello, would anyone know where in Linux I need to change permissions on this? 

it is running a full Apache install and not what came with Cache.

Hi,

I am wondering if anyone would know where I can get a copy of the ASTM E1394 specification for an ASTM-XML file based instrument to LIS interface I am writing?

The instrument vendor refers to ASTM 1394-97.

Cheers,
Patrick

We have the following code, but recently had a few issues with messages sent to downstream systems being rejected. 
After investigating, seems that the message being sent is being truncated, the RawContent that we are pulling from Ens.EnsLib_HL7.Message only has the first 10k of the message

We are storing message body IDs in a table, then when we receive later messages, we look up the corresponding record in the table, 
extract the message and alter some fields from the saved message based on the received message and send onto downstream systems

Is there a simple way of getting the full message

What is the correct way to specify rowspan and colspan in a ZEN PDF report using <Item> <Caption> 

I am specifying rowspan in the <Caption> tag after the <Item> but it's not working.

Hey Community,
I have an scenario, please advise or suggest possible ways to solve it.
So i have a persistent class to test results of a diagnostic laboratory. The properties are 

• Patient name
• Type of Test
• Order ID

Question:

What version of Caché supports TLS v1.2? 

Answer:

Caché 2015.2 announced support for TLS v1.1 and v1.2.  In this version, the SSL/TLS configuration page provides checkboxes for TLS v1.1 and v1.2, which allows the versions to be configured individually.  This allows sites to, for example, require TLS v1.2 only.

Additionally, some earlier versions of Caché provide undocumented support for TLS v1.1 and v1.2, specifically Caché 2014.1.3 and above and 2015.1, on Windows, Linux and Unix.

Here’s why:  Caché uses the openssl library for SSL/TLS.

Hello, today we had another freeze in the system. It was close to 09:55. Logs follow for analysis. Following are MSM/MUMPS logs with about 1050 active connections at the time of the freeze. Does anyone see something different?

#Active connections
^CONNECTIONS("66281,35364")="1110|21/06/2022|09:49:24"
^CONNECTIONS("66281,35374")="1103|21/06/2022|09:49:34"
^CONNECTIONS("66281,35384")="1098|21/06/2022|09:49:44"
^CONNECTIONS("66281,35394")="1100|21/06/2022|09:49:54"
^CONNECTIONS("66281,35404")="1094|21/06/2022|09:50:04"
^CONNECTIONS("66281,35414")="1091|21/06/2022|09:50:14"
^CONNECTIONS("66281,35424")="10

How would you like to be able to access the Web Terminal directly from your VSCode?

I have a table with a Varchar(max) column that I have created via the HealthShare SQL portal, and I see that in it's underlying class that column corresponds to a %Stream.GlobalCharacter

When I try to do a text search on that column (referenced as cd.Code in the example below) I get an error

select * 
from DevTools_CodeAnalysis_tables.Code cd
inner join DevTools_CodeAnalysis_tables.MethodData mtd
on charindex( mtd.qualifiedRef,  cd.Code) > 0

It produces the error

 Scalar function CHARINDEX (arg2) not supported for stream fields

How do I search it?
 

In this series of articles, I'd like to present and discuss several possible approaches toward software development with InterSystems technologies and GitLab. I will cover such topics as:

• Git 101
• Git flow (development process)
• GitLab installation
• GitLab Workflow
• Continuous Delivery
• GitLab installation and configuration
• GitLab CI/CD

In the first article, we covered Git basics, why a high-level understanding of Git concepts is important for modern software development, and how Git can be used to develop software.

In the second article, we covered GitLab Workflow - a complete software life cycle process and Continuous Delivery.

I this article we'll discuss:

• GitLab installation and configuration
• Connecting your environments to GitLab

I want to call a method which is in %SYS namespace : 

set NS = $NAMESPACEZN"%SYS"do ##class(Config.MapGlobals).Delete(...)
ZN NS

In reality code is even more complex (eg: need a try catch block to make sure namespace is switched back even if there is some error).
Is it possible to do this without changing current namespace ?
For example (does not work) :

do ##class(%SYS.Config.MapGlobals).Delete(...)

Suppose you have developed your own web app with InterSystems technologies stack and now want to perform a captcha validation on the client side in order to determine whether or not the user is human and make it safer.There are some modern frameworks to address the captcha issue, however most part of them needs internet access to generate codes and sometimes are complex to implement.Take this as basic example considering that image recognition has gotten too good.That's why you nowadays you tend to see more pattern recognition captchas than mere reading ones.(I.e.

Is there a way for us to restrict user's ODBC permissions based on what program they're running on a client?

For example, we have some older Windows apps (.exe) that are a regular part of our software package which require the user to be able to select, insert, update, and delete. Some of our users are also using other third-party apps to connect (mostly reporting tools) but we only want them to be able to select unless we've approved the exe. Is there a way to do that?

These are not applications that were developed using CacheDirect.

Hi Community,

I'm building a browser only code editor for IRIS. Here is a video demonstration. It's still very much "work in progress", more updates to come. I will also add it to ZPM soon.

https://www.youtube.com/watch?v=Am6QAvrPPPg

What is the difference between method and class method and why are mentioning one as Method and class method what is the purpose of this?