Surely you have all heard about FHIR as the panacea and solution to all interoperability and compatibility problems between systems. Right here we can see one of his classic defenders holding a FHIR resource in his hand and enjoying it immensely:

But for the rest of us mortals we are going to make a small introduction.

What is FHIR?

Let's get straight to the definition: FHIR (Fast Healthcare Interoperability Resource) is an interoperability standard developed by HL7 (Health Level 7 set of standards) designed to enable electronic exchange of healthcare data between different systems in the

Hi Community!

Coding guidelines discussion. Consider you have For with one command in the cycle. Here are the options:

One

For i=1:1:1000 set ^Test(i)=""

Two

For i=1:1:1000 {
 set ^Test(i)=""
}

Same for the "If":

if a set b=a

or

if a {
 set b=a
}

Your choice? Or maybe even other options? 

In VS Code using the InterSystems ObjectScript extensions, I'd like the indentation applied to match that of IRIS Studio. Specifically for comments and dot syntax, I'd like pressing enter (carriage return) to preserve the current dot depth and same comment beginning.

In IRIS Studio after changing the indentation settings to custom using " \t.#/;" without quotes (note the leading space), the behaviour looks like this:

And after pressing enter the leading comment is preserved:

For dot indented code:

After pressing enter the dot depth is preserved:

If I do the same thing in VS Code the carriage

HealthShare Patient Index – Virtual February 20-22, 2024   9:00am-5:00pm US-Eastern Time (EST)

• This 3-day course teaches the installation, configuration, and use of HealthShare Patient Index.
• Day one focuses on patient identification issues, and the tools that can be used for reviewing records identified by the system for human attention.
• This session is appropriate for both technical staff and administrative staff who manage patient identification issues.

Hello everyone!
I am wondering how I can retrieve multipart form-data from a request that is coming into my REST-service.
I am supposed to retrieve a string and a file. The file is being retrieved without issues, but the "testprofile" string is not being retrieved at all.
It just logs a an empty entry. 
The request that is sent to my REST-service has the Content-Type: multipart/form-data
Thanks beforehand for the help! :)

Down below is the code I use right now to retrieve the string and file from Form-data Rest HTTP-request to my service.

    set vProfile = %request.Get("testprofile")
    set vFilen 

Hello everyone!
I am receiving a HTTP multipart/form-data request into my rest service.
How can I read the values for each Key in the form?
The key "Profile" is sent to my service as a String data type.
The code I have below does not seem to work, where I try to read the Key profile in the form.

I appreciate all the help I can get! :)

🔥 Curious about the FHIR standard that everyone's talking about?

📚 Read on for a brief introduction, then try a brand-new learning path to get more in-depth knowledge!

The HL7® FHIR® standard has revolutionized the way healthcare developers take on the challenges of data interoperability. FHIR allows healthcare systems to exchange information seamlessly, and patient data can be consolidated in real time, regardless of where it's stored.

FHIR is a REST API that can handle both narrative and coded data, and it consists of resources, essentially building blocks for different data concepts such

Processing FHIR resources with FHIR SQL BUILDER to predict the probability of developing hepatitis C disease

With the development of technology, the medical industry is also constantly advancing, and humans often pay more attention to their own health,
By learning and processing datasets through computers, diseases can be predicted.

Pre condition: Ability to use FHIR and ML
Firstly, our dataset is obtained from kaggle and transformed into FHIR resources based on patient gender, age, ALP or ALT, and imported into the FHIR resource repository

To import the FHIR resource repository, we can use this

This article is intended to describe how the clinFHIR application can be used to help developers both understand FHIR and to develop applications that utilize FHIR artifacts. It’s not intended to be an introduction to FHIR, but rather describe how clinFHIR can help on the learning / development journey. It’ll be reasonably high level - there is other information available, especially on my personal blog.

I do recommend that everyone who is working with FHIR join the FHIR chat - it is a great way to ask questions of the FHIR community - most of the experts hang out there.

Hi Developers,

We have exciting news! The new InterSystems online programming contest dedicated to all things health-related will start very soon! 

🏆 InterSystems FHIR and Digital Health Interoperability Contest 🏆

Duration: January 15 - February 4, 2024

Prize pool: $14,000

I am able to capture two values in two separate contexts in the BPL. One through an API call and another by looking at the contents of PV1:7. These are context.Prov  and context.ProvName. I am checking to see if the values contained in the contexts are the same and if yes process further and if not stop.

In the IF statement I tried the below but none worked. Can someone please tell me what I am doing wrong. The trace does show that they are the same value so that's not it. 

1. context.Prov = context.ProvName

2.  "context.Prov" = "context.ProvName" and

3.  context.Prov [ context.ProvName

Is there an ObjectScript analog of Find with Match Element Type option? I know there is an  ObjectScript analog of Find in Files, Studio.Project.FindInFiles and Studio.Project.FindInProject, but I failed to locate so far an analog of Edit/Find. I am specifically interested in Match Element Type option so I could search across selected files for globals. Somehow Studio.Project.FindInFiles does not offer this option natively.

Hey Community,

Watch this video to get an introduction to the components of an HL7 V2 production in InterSystems products, which works as an integration engine to connect healthcare systems:

⏯ Introduction to HL7 V2 Productions

Hi all,

When is a Developer Community post not a Developer Community post? When it's just a few sentences wrapped around a link to InterSystems documentation! And what better way to finish up 2021 than by telling you about something cool that's been available since v2020.3? As the ball drops in Times Square, curl up with this:

Repeating Previous Commands

I think it will bring you joy! Post your favorite aliases below. Happy New Year!

I have a production that writes x12 file with a EnsLib.EDI.X12.Operation.FileOperation. I am trying to get file name that was used back to the business process. What is the best way to do this?

Hello, we deploy IRIScluster using IKO on Red Hat OpenShift deployed in AWS. For DR, we have another AWS region on stand by. We do daily backups. I run a standalone IRIS in the second region. I want to add it as async member to the mirror to have some essential data available in the standby region. Is this possible?

Hi, developers!

Currently, I'm working on a project that requires highly dynamic event management. In the context of the Java programming language, my first instinct should be to opt for the "Observer Pattern", which is an approach to managing interactions between objects by establishing a notification mechanism. It allows multiple observers to react to changes in the state of a subject autonomously, promoting code flexibility and modularity. If you are not familiar with this design pattern, check out Wikipedia to find more information about it.

While it's natural and commonly used in certain programming languages as Java and C++, in ObjectScript, it's quite a different story.

InterSystems FAQ rubric

If the system does not stop for 24 hours, old journal files will be deleted at 0:30 according to the "Journal file deletion settings".

A possible cause of journal files remaining that are older than the "Journal file deletion settings" is that there are transactions that remain open.

In that case, you will be able to delete the journal file by searching for processes executing transactions and finalizing the transactions.

The sample below checks for the existence of open transactions, and if they exist, outputs the target file name and journal record information.

(Samples

Hi All,

I have ROUTINE for Get Data end of day. Routine Name is "getTicket.mac" . previously i execute at studio using this command to get data 

w $$getTicket^production.etl.getTicket() and the result success as we want, in this case i want execute routine using BS ( Business Service ) and i want this routine execute every night at 12.00 AM

how to implement this condition.

Thanks For your help and time

Hi Team,

I want to create a task in the task manager to manage the member details. so what i have done let me first brief you :-

1) Created a persistent class to store the custom csv details into a sql table.

2) created a business service to take the custom csv file from a inbound folder and use this class (EnsLib.RecordMap.Service.FileService) to use RecordMap.

First i have created CSV Wizard then RecordMap then DTL and map the fields with csv values.

3) then i created a business process (EnsLib.MsgRouter.RoutingEngine) and created a business Rule in business Rule i'm taking the source as

When exporting a %JSON.Adaptor inherited class, undefined %Boolean properties are exported to JSON as "false" instead of null or empty

is there any way to control this behavior?

Class Test.Json extends%JSON.Adaptor
{
    Property bool as%Boolean;
}

set test = ##class(Test.Json).%New()
do test.%JSONExport()
{
    "bool": false
}

The ideal number of table permissions to assign for your users is zero. Permissions should be granted upon sign-in based on the application used for access. For web applications, we have a simple way of doing this by appointing application roles, matching roles, and required resources in the System Management Portal.

ODBC and JDBC connections present a different problem, however, especially when third-party applications are involved. As providers of an ERP system, our customers often wish to be able to employ various software packages to integrate with or report on their data. Many of these programs are capable of running any kind of query. Yet, letting them do that can be devastating to a customer’s data.

Tring to Performing following script in IRIS but do not know how to format Date. Normally, I would use TO_DATE or TO_TIMESTAMP in the actual queue statement below, but since I'm using Prepared Statements, I do not know how to format date in 'values' that is being used in the %Execute. It generates errors. I'm updating an Oracle Database via a SQL JDBC Gateway Connection. Does anyone know how to pass in Dates? 

Books Table definition

Hello,

I need to make an LDAP query to retrieve information about a specific team of employees. I have a custom service that instantiates a message of type EnsLib.LDAP.Message.Search with a filter matching the search and redirects it to an operation of type EnsLib.LDAP.Operation.Standard. I didn't get any errors, but I didn't get any results either. So I created an operation that inherits from EnsLib.LDAP.Operation.Standard and I overloaded the method to retrieve something. I get this:

ERROR <Ens>ErrException: <FRAMESTACK>ProcessSearch+5^myDSO.operation.requeteLDAP.1 -- - connected as '-'

I am using Intersystems Iris Community Edition. I have created a Rest Api to post HL7 message directly through postman. It is working fine, But I want to create the business service to read the HL7 message from Rest- Api. I tried to create this, but I am not understanding how to do that. Can anybody help me?

Hello Community,

The process private global doesn't impact the $storage. But, Why the value has decreases at first time of initialization. 

Just want to ensure about it.

So far, we have covered how to use ObjectScript to manage users, roles, resources, and applications.There are a few other classes in this package that work similarly to the ones mentioned above.However, these four classes are the ones everyone will have to use to manage their application security.Suppose you wanted to create your own Security management portal for this package.There would be some specific issues to think about for an API.Since the classes use similar methods, we can create fewer API endpoints using indirection.

00:41:54.088:Ens.Director: Queued messages are being saved in the suspended production.
00:41:54.089:Ens.Director: Production 'MemberBPL.MemberProduction' suspended.

I have created the business service, process and operations and message was going through service to operation but some message got queued that'swhy production is not stopping correctly. neither it's deleting not it's stopping fully.

I have also trying purging data under manage production.

Please help me here.... how i can delete this production. ??

Using the below python script I am getting : 

$ ./hello_world.py 
Traceback (most recent call last):
  File "/home/wwillett/dev/vscode-objectscript/Samples-python-helloworld/./hello_world.py", line 34, in <module>
    run()
  File "/home/wwillett/dev/vscode-objectscript/Samples-python-helloworld/./hello_world.py", line 21, in run
    connection = irisnative.createConnection(ip, port, namespace, username, password)
                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
RuntimeError: * [ERROR_SEQUENCE_ERROR]

I have verified that the Gateway is running.

I don't know what

ERROR &lt;Ens&gt;ErrGeneral: Production is not fully stopped, cannot delete it. How do I fix this.